磁保持型航天电磁继电器性能提升与质量一致性设计

doi:10.19595/j.cnki.1000-6753.tces.211217

Abstract
Figure/Table
References
Related Citation (8)

Download: PDF (5518 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Magnetic latching aerospace electromagnetic relay (MLAER) has high sensitivity, low heat generation, low power consumption, and small size, used in various aerospace equipment such as vehicles, spacecraft, and satellites. The calculation accuracy of MLAER performance parameters and the iterative search efficiency of the optimal combination of consistency under the constraints of multiple performance objectives are the important factors affecting the optimization of MLAER. This paper proposes a design method for modeling and iterative optimization of MLAER combined with the Stoner-Wahlfarth method and the Preisach method, based on a non-linear permanent magnet local hysteresis model. An approximate model basis function is obtained based on fuzzy chaotic expansion. The parameters of the measured prototype are determined using the fastest curvature descent, and the error between the measured and calculated values is corrected using the kriging method to achieve accurate and efficient calculation of the performance parameters of the relay. The law between the magnetic retention relay design parameter and the shape factor of the suction curve is revealed, and the differential evolution algorithm is improved to form an adaptive optimal population iteration strategy. It improves the optimization efficiency and robustness of the differential evolution algorithm in solving the magnetic retention relay optimization problem. The following results have been achieved.
(1) The magnetically maintained aerospace relay with nonlinear anisotropic permanent magnets has strong nonlinearity and the local hysteresis effect of magnetization and demagnetization. Therefore, this paper proposes a virtual prototype modeling method that can be applied to all types of relays. The S-W method is used to calculate the vectorization of the magnetic dipole after magnetization and demagnetization of nonlinear anisotropic permanent magnets. Accordingly, the virtual prototype model of the relay's static and dynamic performance characteristics is established. The electromagnetic suction force, mechanical reaction force, operating voltage, breaking speed are calculated for different voltages and rotation angles. Compared with the measured results, the maximum error is 5.01 %.
(2) The calculation accuracy of the existing agent model is poor when the performance characteristics are high dimensional, strongly nonlinear, and output zero crossing. Based on a small number of virtual prototype model calculation values, the basis function of the proxy model is obtained using fuzzy chaos expansion to correct the error between measured and the calculated results. Then, the proxy model is established. The maximum error is 6.72 %, the computational accuracy is similar to that of the virtual prototype, and the computational resource and time consumptions are less than one percent of the virtual prototype model.
(3) Based on the agent model, the formation mechanism and improvement direction of relay performance characteristics are determined from the perspectives of suction-reverse force coordination and partition kinetic energy. Meanwhile, the multi-objective differential evolution algorithm is improved to meet the demand for multi-objective optimization. The adaptive population evolution strategy and the optimal solution set screening strategy based on the idea of small habitat are proposed, which can obtain the optimal Pareto frontier solution set combination more uniformly and quickly.
(4) The iterative optimization search process avoids maturing prematurely and falling into local optimal solution sets. The extensiveness and uniformity of solution distribution are enhanced. Thus, the iterative optimization of the MLAER multi-correlation performance parameters can be ensured with accuracy and efficiency.
(5) The potential zeroing faults, such as armature neutralization and operation voltage overrun, were optimized, and the optimal mean and tolerance combinations of design parameters were given. The performance and quality consistency of the relay were improved by 16.8 % and 40 % compared with the pre-optimization period. The optimization results demonstrate the virtual prototype model considering the nonlinear permanent magnet charging and demagnetizing effects, the agent model introducing the measured results, and the differential evolution algorithm with the adaptive population strategy are effective in solving the MLAER problem.

Key words： Magnetic latching aerospace electromagnetic relay (MLAER) virtual prototype surrogate model multi-objective design optimization

Received: 05 August 2021

PACS:

TM581.3

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Chen Hao
	Ye Xuerong
	Liang Huimin
	Zhai Guofu

Cite this article:

Chen Hao,Ye Xuerong,Liang Huimin等. Performance Enhanced and Quality Consistency Design Optimization of Magnetically Latching Aerospace Electromagnetic Relay[J]. Transactions of China Electrotechnical Society, 2023, 38(4): 1076-1087.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.211217 OR https://dgjsxb.ces-transaction.com/EN/Y2023/V38/I4/1076

[1] 张高廷, 曹云东, 刘炜. 簧片式继电器固有振动特性研究[J]. 电工技术学报, 2020, 35(2): 292-299.
Zhang Gaoting, Cao Yundong, Liu Wei.The natural vibration characteristics of reed relay[J]. Transactions of China Electrotechnical Society, 2020, 35(2): 292-299.
[2] 翟国富, 薄凯, 周学, 等. 直流大功率继电器电弧研究综述[J]. 电工技术学报, 2017, 32(22): 251-263.
Zhai Guofu, Bo Kai, Zhou Xue, et al.Investigation on breaking arc in DC high-power relays: a review[J]. Transactions of China Electrotechnical Society, 2017, 32(22): 251-263.
[3] Bramerdorfer G.Multiobjective electric machine optimization for highest reliability demands[J]. CES Transactions on Electrical Machines and Systems, 2020, 4(2): 71-78.
[4] 李博, 由佳欣, 熊方圆, 等. 基于分断动能的小型密封电磁继电器过负载能力提升方法[J]. 电工技术学报, 2019, 34(13): 2760-2769.
Li Bo, You Jiaxin, Xiong Fangyuan, et al.An overload capacity improvement method based on break kinetic energy for a type of hermetically sealed relay[J]. Transactions of China Electrotechnical Society, 2019, 34(13): 2760-2769.
[5] 赵升, 舒亮, 吴自然, 等. 电磁-永磁复合型接触器数值仿真与控制方法[J]. 电工技术学报, 2020, 35(5): 1083-1092.
Zhao Sheng, Shu Liang, Wu Ziran, et al.Numerical simulation and control method of electromagnetic-permanent composite contactor[J]. Transactions of China Electrotechnical Society, 2020, 35(5): 1083-1092.
[6] Lee J S, Choi G.Modeling and hardware-in-the-loop system realization of electric machine drives-a review[J]. CES Transactions on Electrical Machines and Systems, 2021, 5(3): 194-201.
[7] 杨文英, 郭久威, 王茹, 等. 继电器电磁机构电磁-热耦合模型建立与计算方法[J]. 电工技术学报, 2017, 32(13): 169-177.
Yang Wenying, Guo Jiuwei, Wang Ru, et al.Establi-shing and calculating methods of electromagnetic-thermal coupling model of relay's electromagnetic mechanism[J]. Transactions of China Electrotechnical Society, 2017, 32(13): 169-177.
[8] Ouagued S, Amara Y, Barakat G.Cogging force analysis of linear permanent magnet machines using a hybrid analytical model[J]. IEEE Transactions on Magnetics, 2016, 52(7): 1-4.
[9] Amrhein M, Krein P T.Induction machine modeling approach based on 3-D magnetic equivalent circuit framework[J]. IEEE Transactions on Energy Con-version, 2010, 25(2): 339-347.
[10] Ahadi D M, Hejase J A, Becker W D, et al.A hybrid methodology for jitter and eye estimation in high-speed serial channels using polynomial chaos surrogate models[J]. IEEE Access, 2019, 7: 53629-53640.
[11] 李雄松, 崔鹤松, 胡纯福, 等. 平板型永磁直线同步电机推力特性的优化设计[J]. 电工技术学报, 2021, 36(5): 916-923.
Li Xiongsong, Cui Hesong, Hu Chunfu, et al.Optimal design of thrust characteristics of flat-type permanent magnet linear synchronous motor[J]. Transactions of China Electrotechnical Society, 2021, 36(5): 916-923.
[12] 唐昭晖, 许志红. 基于响应面法的交流接触器弹簧系统优化设计方法[J]. 电工技术学报, 2022, 37(2): 515-527.
Tang Zhaohui, Xu Zhihong.Optimal design method for AC contactor spring system based on response surface method[J]. Transactions of China Electro-technical Society, 2022, 37(2): 515-527.
[13] 罗玉涛, 卢若皓. 基于结构参数分级优化的电机电磁噪声抑制[J]. 电工技术学报, 2021, 36(14): 2957-2970.
Luo Yutao, Lu Ruohao.Hierarchical optimization of structural parameters for motor electromagnetic noise suppression[J]. Transactions of China Electrotech-nical Society, 2021, 36(14): 2957-2970.
[14] 唐捷, 杨银, 刘斯亮, 等. 基于改进SVM与NSGA-Ⅲ的台区相序在线优化方法[J]. 电力系统自动化, 2022, 46(3): 50-58.
Tang Jie, Yang Yin, Liu Siliang, et al.On-line optimization method for phase sequence in station area based on improved support vector machine and non-dominated sorting genetic algorithm-Ⅲ[J]. Automation of Electric Power Systems, 2022, 46(3): 50-58.
[15] 刘明凯, 王占山, 邢彦丽. 基于强化多目标差分进化算法的电-气互联系统最优潮流计算[J]. 电工技术学报, 2021, 36(11): 2220-2232.
Liu Mingkai, Wang Zhanshan, Xing Yanli.Enhanced multi-objective differential evolutionary algorithm based optimal power flow calculation for integrated electricity and gas systems[J]. Transactions of China Electrotechnical Society, 2021, 36(11): 2220-2232.
[16] 丁煜蓉, 陈红坤, 吴军, 等. 计及综合能效的电-气-热综合能源系统多目标优化调度[J]. 电力系统自动化, 2021, 45(2): 64-73.
Ding Yurong, Chen Hongkun, Wu Jun, et al.Multi-objective optimal dispatch of electricity-gas-heat integrated energy system considering com-prehensive energy efficiency[J]. Automation of Electric Power Systems, 2021, 45(2): 64-73.
[17] 李祥林, 李金阳, 杨光勇, 等. 电励磁双定子场调制电机的多目标优化设计分析[J]. 电工技术学报, 2020, 35(5): 972-982.
Li Xianglin, Li Jinyang, Yang Guangyong, et al.Multi-objective optimization analysis of electric-excitation double-stator field-modulated machine[J]. Transactions of China Electrotechnical Society, 2020, 35(5): 972-982.
[18] 陈龙, 易琼洋, 贲彤, 等. 全局优化算法在Preisach磁滞模型参数辨识问题中的应用与性能对比[J]. 电工技术学报, 2021, 36(12): 2585-2593, 2606.
Chen Long, Yi Qiongyang, Ben Tong, et al.Application and performance comparison of global optimization algorithms in the parameter identi-fication problems of the Preisach hysteresis model[J]. Transactions of China Electrotechnical Society, 2021, 36(12): 2585-2593, 2606.
[19] Li Zhi, Shan Jinjun, Gabbert U.Inverse compensator for a simplified discrete Preisach model using model-order reduction approach[J]. IEEE Transactions on Industrial Electronics, 2019, 66(8): 6170-6178.
[20] 梁慧敏, 于海丹, 唐钰杰, 等. 双磁钢差动式电磁继电器虚拟样机与参数优化研究[J]. 中国电机工程学报, 2016, 36(1): 258-267.
Liang Huimin, Yu Haidan, Tang Yujie, et al.Virtual prototyping and parameter optimization of differential electromagnetic relays with double permanent mag-nets[J]. Proceedings of the CSEE, 2016, 36(1): 258-267.