|
|
|
| Robust Design of Reaction Torque Measurement System Based on Disturbance Observer |
| Chen Xia, Zou Jibin |
| Harbin Institute of Technology Harbin 150001 China |
|
|
|
|
Abstract A novel robust control method based on disturbance observer (DOB) is presented, in order to achieve high performance control specifications for the torque measurement servo system. First, a position closed loop control system is established according to working principle of the torque measurement system. In order to estimate the measured torque, the DOB is added to the position closed loop control system. Next, a mathematical model of the DOB system is built. And an approximate design method for DOB is put forward. Simulation and experimental results show that, through the DOB added to the system, position interference rejection and torque dynamic performance of the system are increased. And the DOB can be easily designed through the approximate method; also it can improve the performance of the control system.
|
|
Received: 11 March 2009
Published: 04 March 2014
|
|
|
|
|
|
[1] 王永秀, 梅志千, 熊田忠, 等. 交流伺服系统的鲁棒性设计[J]. 微特电机, 2007(2): 20-23.
[2] Umeno T, Hori Y. Robust speed control of DC servomotors using modern two degrees-of-freedom controller design[J]. IEEE Transactions on Industrial Electronics, 1991, 38(5): 363-368.
[3] Ho Seong Lee. Robust sigital tracking controllers for high-speed/high-accuracy positioning systems[D]. Berkeley, USA: University of Califonia, 1994.
[4] 纪志成, 沈艳霞, 薛花. 无刷直流电机自适应模糊控制的研究[J]. 中国电机工程学报, 2005, 25(5): 104-109.
[5] 李向国, 梅志千, 王永秀. 倒立摆伺服系统中的干扰补偿控制[J]. 微特电机, 2008(11): 29-31.
[6] 方强, 姚郁. 电动负载模拟器扰动观测器系统化设计[J]. 哈尔滨工业大学学报, 2007, 39(3): 350-353.
[7] 赵希梅, 郭庆鼎. 基于ZPETC和DOB的永磁直线同步电机的鲁棒跟踪控制[J]. 中国电机工程学报, 2007, 27(30): 60-63.
[8] 赵希梅, 郭庆鼎. 为提高轮廓加工精度采用DOB和ZPECT的直线伺服鲁棒跟踪控制[J]. 电工技术学报, 2006, 21(6): 111-114.
[9] 张绍德, 陈主成. 一种基于干扰观测器的伺服系统设计[J]. 电子科技大学学报, 2005, 34(1): 85-88.
[10] 丁新平, 杨俊友, 孙荣斌. 基于干扰观测器PID控制的磁悬浮系统[J]. 沈阳工业大学学报, 2005, 27(3): 288-290.
[11] 刘强, 冯培恩, 潘双夏. 基于干扰观测器的非对称液压缸鲁棒运动控制[J]. 浙江大学学报, 2006, 40(4): 594-598.
[12] 于爽, 付庄, 闫维新, 等. 基于干扰观测器的惯性平台摩擦补偿方法[J]. 哈尔滨工业大学学报, 2008, 40(11): 1831-1833.
[13] 郭庆鼎, 赵希梅, 翁秀华. 基于干扰观测器的龙门移动式镗铣加工中心同步控制[J]. 电工技术学报, 2005, 20(9): 88-91.
[14] 张代林, 陈幼平, 艾武, 等. 基于观测器模型的直线电机干扰抑制技术的研究[J]. 中国电机工程学报, 2007, 27(12): 14-18.
[15] 吴勇, 王英, 熊振华, 等. 直线电机速度扰动控制器的Simulink仿真与比较[J]. 计算机仿真, 2004, 21(5): 155-158. |
|
|
|
2010, Vol. 25 
