考虑空间形位偏差的万能式断路器关键零件断裂失效研究

doi:10.19595/j.cnki.1000-6753.tces.L90305

Abstract
Figure/Table
References
Related Citation (3)

Download: PDF (4936 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract During the closing process of an air circuit breaker (ACB), energy stored in main spring is transferred to four-linkage mechanism through its driving shaft in the form of impact. Position deviations on the striking rod caused by machining and assembly tolerance lead to the fatigue and the final fracture of the driving shaft. This makes operational lifespan of the mechanism inconsistent with the expected design one. Based on multi-body dynamics, a virtual prototype model of the mechanism is established. Accuracy of the virtual prototype is verified by testing rotational positions of two shafts around which the energy storage lever and the linkage shaft rotate. Then, using the measurement data, the spatial deviation range of the end point of the driving shaft relative to the roller is obtained. Then the virtual prototype parameters are used to model the deviation, and the variation of peak load and crack initiation period is calculated. Finally, it is assumed that there is an elliptical-type crack on the driving shaft, and the influence of the deviation on the SIF at the crack tip is studied. In this paper, the influence of the spatial deviation of the driving shaft on its fracture process is given, which can provide theoretical guidance for design and manufacturing.

Key words： Air circuit breaker fracture process tolerance effect

Received: 09 July 2020

PACS:

TM561.1

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhou Xue
	Li Donghui
	Jin Yue
	Zhai Guofu

Cite this article:

Zhou Xue,Li Donghui,Jin Yue等. Fracture Failure Process of Key Part of Air Circuit Breaker Considering Spatial Shape and Position Deviation[J]. Transactions of China Electrotechnical Society, 2022, 37(6): 1595-1606.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.L90305 OR https://dgjsxb.ces-transaction.com/EN/Y2022/V37/I6/1595

[1] 游颖敏, 王景芹, 舒亮, 等. 断路器保护特性测试电流的自适应控制策略[J]. 电工技术学报, 2020, 35(15): 3203-3213.
You Yingmin, Wang Jingqin, Shu Liang, et al.Research on adaptive current control method in cir-cuit breaker protection characteristic test[J]. Transa-ctions of China Electrotechnical Society, 2020, 35(15): 3203-3213.
[2] 刘思奇, 沈兵, 庄劲武, 等. 混合型真空限流断路器短燃弧短间隙下的介质强度恢复试验研究[J]. 电工技术学报, 2020, 35(2): 284-291.
Liu Siqi, Shen Bing, Zhuang Jinwu, et al.Experi-mental study on vacuum dielectric recovery of hybrid current limiting circuit breaker with short arcing time and short gap[J]. Transactions of China Electro-technical Society, 2020, 35(2): 284-291.
[3] 张明, 王永兴, 田宇, 等. 气流场驱动下栅片中弧压提升特性的数值分析[J]. 电工技术学报, 2019, 34(13): 2752-2759.
Zhang Ming, Wang Yongxing, Tian Yu, et al.Nume-rical analysis of arc voltage increasing characteristics in plate driven by airflow field[J]. Transactions of China Electrotechnical Society, 2019, 34(13): 2752-2759.
[4] 杨青. 基于美军标对舰用框架式断路器发展趋势的研究[J]. 电器与能效管理技术, 2014(13): 14-19.
Yang Qing.Research on development trend of air circuit breaker in naval ships based on American military standard[J]. Electrical & Energy Management Technology, 2014(13): 14-19.
[5] 杨秋玉, 彭彦卿, 庄志坚. 基于ADAMS的高压断路器弹簧机构动力学仿真与故障分析[J]. 高压电器, 2018, 54(6): 67-73, 80.
Yang Qiuyu, Peng Yanqing, Zhuang Zhijian.Dynamic simulation and failure analysis of spring mechanism of high voltage circuit breaker based on ADAMS[J]. High Voltage Apparatus, 2018, 54(6): 67-73, 80.
[6] 何瑞华, 尹天文. 我国低压电器现状与发展趋势[J].电器与能效管理技术, 2014(1): 1-10, 26.
He Ruihua, Yin Tianwen.Present situation and development trend of low voltage electrical apparatus in China[J]. Electrical & Energy Management Technology, 2014(1): 1-10, 26.
[7] 孟晓承, 韩学山, 许易经, 等. SF₆高压断路器机械故障概率的非精确条件估计[J]. 电工技术学报, 2019, 34(4): 693-702.
Meng Xiaocheng, Han Xueshan, Xu Yijing, et al.Imprecise estimation for conditional mechanical outage probabilities of SF₆ high voltage circuit breakers[J]. Transactions of China Electrotechnical Society, 2019, 34(4): 693-702.
[8] 杨秋玉, 阮江军, 张灿, 等. 基于定量递归分析的高压断路器机械缺陷辨识及应用[J]. 电工技术学报, 2020, 35(18): 3848-3859.
Yang Qiuyu, Ruan Jiangjun, Zhang Can, et al.Study and application of mechanical defect identification for high-voltage circuit breakers using recurrence quanti-fication analysis[J]. Transactions of China Electro-technical Society, 2020, 35(18): 3848-3859.
[9] 孙曙光, 李勤, 杜太行, 等. 基于一维卷积神经网络的低压万能式断路器附件故障诊断[J]. 电工技术学报, 2020, 35(12): 2562-2573.
Sun Shuguang, Li Qin, Du Taihang, et al.Fault diagnosis of accessories for the low voltage con-ventional circuit breaker based on one-dimensional convolutional neural network[J]. Transactions of China Electrotechnical Society, 2020, 35(12): 2562-2573.
[10] 赵书涛, 王波, 华回春, 等. 基于马尔科夫模型的直流断路器可靠性评估方法[J]. 电工技术学报, 2019, 34(增刊1): 126-132.
Zhao Shutao, Wang Bo, Hua Huichun, et al.Reliability evaluation method of DC circuit breaker based on Markov model[J]. Transactions of China Electrotechnical Society, 2019, 34(S1): 126-132.
[11] 季良, 陈德桂, 刘颖异, 等. 连杆转换位置对MCCB操作机构的影响及其优化[J]. 电工技术学报, 2010, 25(9): 87-91, 121.
Ji Liang, Chen Degui, Liu Yingyi, et al.Analysis and optimization of linkage transfer position for the operating mechanism of MCCB[J]. Transactions of China Electrotechnical Society, 2010, 25(9): 87-91, 121.
[12] 舒亮, 吴浪, 吴桂初, 等. 一种断路器多体动力学仿真方法[J]. 电工技术学报, 2017, 32(5): 41-48.
Shu Liang, Wu Lang, Wu Guichu, et al.A new method of multibody dynamics simulation of circuit breakers[J]. Transactions of China Electrotechnical Society, 2017, 32(5): 41-48.
[13] 闫姿姿, 张敬涛, 王小焕, 等. 框架式真空断路器可靠性影响参数研究[J]. 真空科学与技术学报, 2019, 39(8): 678-682.
Yan Zizi, Zhang Jingtao, Wang Xiaohuan, et al.Design optimization of vacuum circuit-breaker frame-work: a simulation and experimental study[J]. Chinese Journal of Vacuum Science and Technology, 2019, 39(8): 678-682.
[14] 刘超, 赵伟涛, 张强, 等. 真空断路器弹簧操动机构机械特性的仿真与优化[J]. 高压电器, 2019, 55(8): 65-71.
Liu Chao, Zhao Weitao, Zhang Qiang, et al.Simu-lation and optimization for mechanical characteristics of spring operating mechanism in vacuum circuit breaker[J]. High Voltage Apparatus, 2019, 55(8): 65-71.
[15] Park S H, Ahn K Y, Lee B Y.Dynamic analysis and structural design of links in an air circuit breaker to enhance fatigue life[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mecha-nical Engineering Science, 2005, 219(1): 11-18.
[16] 胡书通. 低压断路器操作机构疲劳寿命评估方法及其应用研究[D]. 西安: 西安交通大学, 2014.
[17] 宋宝玉, 古乐, 邢恩辉. 真空条件下GCr15钢摩擦磨损性能研究[J]. 哈尔滨工业大学学报, 2004, 36(2): 238-241.
Song Baoyu, Gu Le, Xing Enhui.Friction and wear properties of GCr15 steel under vacuum condition[J]. Journal of Harbin Institute of Technology, 2004, 36(2): 238-241.
[18] Fei He, Ke Yang, Ning Guo, et al.Study on friction/ wear and contact stress of variable-lead Spiral pair substructure[J]. IOP Conference Series: Materials Science and Engineering, 2019, DOI: 10.1088/1757-899X/493/1/012047.
[19] 李志农, 刘杰, 卢文秀, 等. 转子系统盘轴松动故障动力学建模和仿真研究[J]. 机械工程学报, 2020, 56(7): 60-71.
Li Zhinong, Liu Jie, Lu Wenxiu, et al.Research on dynamic modeling and simulation of rotors with loose disc[J]. Journal of Mechanical Engineering, 2020, 56(7): 60-71.
[20] 干勇, 田志凌, 董翰, 等. 中国材料工程大典(第3卷): 钢铁材料工程(下)[M]. 北京: 化学工业出版社, 2006.
[21] (美)诺尔曼 E. 道林. 工程材料力学行为—变形、断裂与疲劳的工程方法[M]. 江树勇, 张艳秋, 译. 北京: 机械工业出版社, 2019.
[22] Yeun C P, Changbeom A, Hyoung-Bo S, et al.Failure analysis of fatigue cracking in the tension clamp of a rail fastening system[J]. International Journal of Steel Structures, 2019, 19(5): 1570-1577.
[23] 魏维, 郭文勇, 沈惠杰, 等. 基于ANSYS Workbench的轴套表面裂纹应力强度系数有限元分析研究[J]. 海军工程大学学报, 2019, 31(1): 36-40.
Wei Wei, Guo Wenyong, Shen Huijie, et al.Finite element analysis of stress intensity factor of surface crack in shaft sleeve based on ANSYS Workbench[J]. Journal of Naval University of Engineering, 2019, 31(1): 36-40.
[24] 赵慧, 吕毅, 窦鹏鹏. 三维裂纹扩展轨迹的厚度效应研究[J]. 兵器装备工程学报, 2019, 40(8): 219-225.
Zhao Hui, Lü Yi, Dou Pengpeng.Research on thickness effect of three-dimensional crack pro-pagation path[J]. Journal of Ordnance Equipment Engineering, 2019, 40(8): 219-225.
[25] Gupta A, Sun W, Bennett C J.Simulation of fatigue small crack growth in additive manufactured Ti-6Al-4V material[J]. Continuum Mechanics and Thermodynamics, 2020, 32(6): 1745-1761.
[26] 王其亚, 翟国富, 程贤科, 等. 基于正交试验设计的电磁继电器关键调整参数及优化方法[J]. 电工技术学报, 2009, 24(10): 53-58.
Wang Qiya, Zhai Guofu, Cheng Xianke, et al.Key adjusted parameters and optimum method of elec-tromagnetic relay based on orthogonal experimental design[J]. Transactions of China Electrotechnical Society, 2009, 24(10): 53-58.
[27] 闻邦椿. 机械设计手册: 疲劳强度与可靠性设计(单行本)[M]. 5版. 北京: 机械工业出版社, 2016.
[28] 赵洋, 刘汉宇, 曾庆军. 高压真空断路器机械特性在线监测系统研制[J]. 高压电器, 2009, 45(6): 91-95, 101.
Zhao Yang, Liu Hanyu, Zeng Qingjun.Study on on-line monitoring for mechanical characteristics of high voltage vacuum circuit breaker[J]. High Voltage Apparatus, 2009, 45(6): 91-95, 101.
[29] 吴发清. 12kV开关柜断路器机械特性监测与弧光检测的研究[D]. 厦门: 厦门理工学院, 2016.