断路器绝缘拉杆动态性能模拟试验

doi:10.19595/j.cnki.1000-6753.tces.L90125

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (4045 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Insulation pull rod is the main driving mechanism of the circuit breaker, which requires not only excellent electrical performance but also good mechanical properties. Exploring the dynamic characteristics and response of the insulation pull rod during operation is of great significance for material performance control and technical specification formulation. In this paper, the circuit breaker simulator was used for the first time to carry out the endurance impact test. The strain distribution and response during operation, as well as the influence of operation times on the insulation pull rod were obtained. The results show that the stress of the insulation pull rod is uneven during the operation process. The main frequency components of impact response are 0~600Hz, and the maximum strain is distributed on the contact side, where the rod bonded with the metal part. In addition, with the increase of the operation times, the first characteristic peak of the frequency response re-mains unchanged, while the high frequency component decreases. The results can provide reference and basis for the test methods, requirement and specifications of rod materials.

Key words： Gas insulated switchgear (GIS) circuit breaker insulation pull rod frequency response dynamic characteristics

Received: 28 June 2020

PACS:

TM561

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Wang Haoran
	Chen Yun
	Wu Zehua
	Zhang Pengfei
	Liao Wei
	Peng Zongren

Cite this article:

Wang Haoran,Chen Yun,Wu Zehua等. Dynamic Characteristics Test of Insulation Pull Rod for Circuit Breaker[J]. Transactions of China Electrotechnical Society, 2021, 36(zk1): 311-320.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.L90125 OR https://dgjsxb.ces-transaction.com/EN/Y2021/V36/Izk1/311

[1] 罗毅, 唐炬, 潘成, 等. 直流GIS/GIL盆式绝缘子表面电荷主导积聚方式的转变机理[J]. 电工技术学报, 2019, 34(23): 5039-5048.
Luo Yi, Tang Ju, Pan Cheng, et al.The transition mechanism of surface charge accumulation domi- nating way in DC GIS/GIL[J]. Transactions of China Electrotechnical Society, 2019, 34(23): 5039-5048.
[2] 庄丞, 曾建斌, 袁传镇. 表面异物对252kV气体绝缘组合电器盆式绝缘子绝缘性能的影响[J]. 电工技术学报, 2019, 34(20): 4208-4216.
Zhuang Cheng, Zeng Jianbin, Yuan Chuanzhen.Effect of surface foreign matters on the insulation property of 252kV gas insulated switchgear basin insulators[J]. Transactions of China Electrotechnical Society, 2019, 34(20): 4208-4216.
[3] 汪沨, 梁芳蔚, 钟理鹏, 等. 基于X射线短时照射的高压直流GIS/GIL绝缘子表面电荷主动消散方法[J]. 电工技术学报, 2020, 35(14): 3147-3151.
Wang Feng, Liang Fangwei, Zhong Lipeng, et al.Active charge dissipation method for surface charge on the surface of DC GIS/GIL insulator based on short-time X-ray irradiation[J]. Transactions of China Electrotechnical Society, 2020, 35(14): 3147-3151.
[4] 王昱皓, 武建文, 马速良, 等. 基于核主成分分析- SoftMax的高压断路器机械故障诊断技术研究[J]. 电工技术学报, 2020, 35(增刊1): 267-276.
Wang Yuhao, Wu Jianwen, Ma Suliang, et al.Mechanical fault diagnosis research of high voltage circuit breaker based on kernel principal component analysis and SoftMax[J]. Transactions of China Electrotechnical Society, 2020, 35(S1): 267-276.
[5] 杨秋玉, 阮江军, 张灿, 等. 基于定量递归分析的高压断路器机械缺陷辨识及应用[J]. 电工技术学报, 2020, 35(18): 3848-3859.
Yang Qiuyu, Ruan Jiangjun, Zhang Can, et al.Study and application of mechanical defect identification for high-voltage circuit breakers using recurrence quantification analysis[J]. Transactions of China Electrotechnical Society, 2020, 35(18): 3848-3859.
[6] 杨秋玉, 阮江军, 黄道春, 等. 基于振动信号时频图像识别的高压断路器分闸缓冲器状态评估[J]. 电工技术学报, 2019, 34(19): 4048-4057.
Yang Qiuyu, Ruan Jiangjun, Huang Daochun, et al.Opening damper condition evaluation based on vibration time-frequency images for high-voltage circuit breakers[J]. Transactions of China Electro- technical Society, 2019, 34(19): 4048-4057.
[7] 陈允, 张鹏飞, 崔博源, 等. 特高压GIS断路器用绝缘拉杆应用现状[J]. 高电压技术, 2019, 45(9): 2699-2706.
Chen Yun, Zhang Pengfei, Cui Boyuan, et al.Application status of insulation pull rod for 1100kV GIS circuit breaker[J]. High Voltage Engineering, 2019, 45(9): 2699-2706.
[8] 徐国政, 钱家骊. 高压断路器原理和应用[M]. 北京: 清华大学出版社, 2000.
[9] Song Wenjin, Meng Yongpeng, Men Chuang, et al.Study on the ultrasonic detection method for internal defects of insulation pull rod in circuit breakers[C]// IEEE International Conference on Condition Monitoring and Diagnosis, Xi’an, 2016: 384-387.
[10] 侯亚峰, 张敬, 侯国良, 等. 高性能芳纶绝缘拉杆用环氧树脂配方研究[J]. 热固性树脂, 2018, 33(6): 27-33.
Hou Yafeng, Zhang Jing, Hou Guoliang, et al.Research on the formula of epoxy resin for high- performance aramid fiber insulated tension pole[J]. Thermosetting Resin, 2018, 33(6): 27-33.
[11] 王睿, 侯梅, 谢瑞广, 等. 高电压等级绝缘拉杆研究[J]. 电磁避雷器, 2015(3): 13-15, 22.
Wang Rui, Hou Mei, Xie Ruiguang, et al.Research of insulated tension rod with highier voltage level[J]. Insulators and Surge Arresters, 2015(3): 13-15, 22.
[12] 谢瑞广, 侯梅, 张卓, 等. 高电压等级绝缘拉杆用树脂配方研究[J]. 电瓷避雷器, 2014(2): 6-9.
Xie Ruiguang, Hou Mei, Zhang Zhuo, et al.Research of resin formulation used for high voltage level insulated pole[J]. Insulators and Surge Arresters, 2014(2): 6-9.
[13] 杨威, 张卓, 尹立, 等. 550kV GIS隔离开关用芳纶绝缘拉杆的制备与性能研究[J]. 绝缘材料, 2017, 50(3): 28-31.
Yang Wei, Zhang Zhuo, Yin Li, et al.Preparation and properties of aramid insulated tension pole for 550kV GIS disconnector[J]. Insulation Materials, 2017, 50(3): 28-31.
[14] 范孝红, 史明, 董伟志, 等. 126kV GIS用绝缘拉杆的研制[J]. 绝缘材料, 2014, 47(3): 33-40.
Fan Xiaohong, Shi Ming, Dong Weizhi, et al.Preparation of insulated tension pole for 126kV GIS[J]. Insulation Materials, 2014, 47(3): 33-40.
[15] 李璐, 牛田野, 姜国庆, 等. 一起550kV SF₆断路器爆炸事故的分析[J]. 中国电机工程学报, 2016, 36(增刊1): 246-250.
Li Lu, Niu Tianye, Jiang Guoqing, et al.Analysis of an explosion accident of 500kV circuit breaker caused by insulation pull arm defect[J]. Proceeding of the CSEE, 2016, 36(S1): 246-250.
[16] 刘芹, 程建伟, 纪哲夫. 550kV GIS隔离开关绝缘拉杆故障原因分析与应对措施[J]. 广西电力, 2019, 42(3): 45-50, 61.
Liu Qin, Cheng Jianwei, Ji Zhefu.Reason analysis and solutions of the insulated pull rod fault in a 550kV GIS disconnector[J]. Guangxi Electric Power, 2019, 42(3): 45-50, 61.
[17] 杨鑫. 800kV罐式断路器绝缘拉杆故障分析及仿真计算[D]. 北京: 华北电力大学, 2014.
[18] 卫昕卓, 邓宏伟, 陈燕南, 等. GIS隔离开关用绝缘拉杆含异物及缺陷时的电场分析[J]. 高压电器, 2016, 52(4): 103-110.
Wei Xinzhuo, Deng Hongwei, Chen Yannan, et al.Electric field analysis of insulated pull rod with different particles and defects in GIS disconnect switch[J]. High Voltage Apparatus, 2016, 52(4): 103-110.
[19] 邓建青, 白晓萍, 邱吉庆, 等. GIS隔离开关用绝缘拉杆的放电研究分析及防范措施[J]. 高压电器, 2019, 55(10): 247-252.
Deng Jianqing, Bai Xiaoping, Qiu Jiqing, et al.Analysis and prevention measures of discharge research of insulated pull rod in GIS disconnector[J]. High Voltage Apparatus, 2019, 55(10): 247-252.
[20] 赵伟涛, 刘超, 党德旺, 等. SF₆高压断路器动力学仿真研究[J]. 电气工程学报, 2019, 14(2): 30-37.
Zhao Weitao, Liu Chao, Dang Dewang, et al.Dynamic simulation research on SF₆ high voltage circuit breaker[J]. Journal of Electrical Engineering, 2019, 14(2): 30-37.
[21] 张红军, 王文文, 张强. 断路器绝缘拉杆的动力学仿真分析与试验研究[J]. 高压电器, 2012, 48(10): 83-87.
Zhang Hongjun, Wang Wenwen, Zhang Qiang.Dynamics simulation analysis and experimental study of circuit-breaker’s insulation pull rod[J]. High Voltage Apparatus, 2012, 48(10): 83-87.
[22] 陶长志. 罐式断路器绝缘拉杆的受力分析及强度校核[J]. 电气工程学报, 2019, 14(3): 108-114.
Tao Changzhi.Force analysis and strength check of insulation pull rod in tank circuit breaker[J]. Journal of Electrical Engineering, 2019, 14(3): 108-114.
[23] 李靖, 赵鸿飞, 赵建沛, 等. SF₆高压断路器分合闸绝缘拉杆动态形变的测试分析[J]. 高压电器, 2009, 45(3): 128-131.
Li Jing, Zhao Hongfei, Zhao Jianpei, et al.Measure- ment and analysis of dynamic deformation of SF₆ circuit breaker’s insulated pull rod for on-off operation[J]. High Voltage Apparatus, 2009, 45(3): 128-131.
[24] 刘鸿文. 材料力学I[M]. 北京: 高等教育出版社, 2017.