直流大功率接触器自磁场灭弧室电弧特性研究

doi:10.19595/j.cnki.1000-6753.tces.L90495

Abstract
Figure/Table
References
Related Citation (5)

Download: PDF (2697 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The distribution system of rail transit traction system is generally supplied by dc power , and its rated voltage and current are generally kV and kA levels. Therefore, as a key component of the distribution system, the demand for various types of DC high-power contactors is further and further. The core problem that restricts the development of the product is the arc extinguishing ability and the arc extinguishing speed of the chamber under the inductive load of high DC power. Based on this problem, arc characteristics of a self-blowing arc extinguishing chamber are studied in this paper. The distribution of the self-blowing arc magnetic field generated by the main contact flowing through different DC currents in the arc extinguishing chamber is obtained through simulation. The characteristics of the breaking arc and the energy of arc burning are compared and analyzed under the inductive load of different time constants and resistance. The contactor with self-blowing arc-extinguishing chamber has the ability to break the inductive DC load with high voltage, large current and large time constant, which has strong practical application value and theoretical research significance.

Key words： DC high-power contactor arc characteristics arcing chamber design DC traction system

Received: 11 July 2020

PACS:

TM502

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhou Xue
	Zhou Yuxin
	Sun Huichao
	Zhai Guofu

Cite this article:

Zhou Xue,Zhou Yuxin,Sun Huichao等. Study on Arc Characteristics in a Self-Blowing Arc Chamber for a DC High Power Contactor[J]. Transactions of China Electrotechnical Society, 2021, 36(zk1): 292-302.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.L90495 OR https://dgjsxb.ces-transaction.com/EN/Y2021/V36/Izk1/292

[1] 纽春萍, 熊乾村, 徐丹, 等. 大功率直流接触器在不同介质中开断电弧特性的实验研究[J]. 高电压技术, 2019, 45(11): 3481-3486.
Niu Chunping, Xiong Qiancun, Xu Dan, et al.Experimental study on arc breaking characteristics of high-power DC contactor in different gases[J]. High Voltage Engineering, 2019, 45(11): 3481-3486.
[2] 李静, 刘凯, 曹云东, 等. 直流接触器分断过程中弧根演变及对重燃的影响分析[J]. 中国电机工程学报, 2019, 39(4): 1241-1251.
Li Jing, Liu Kai, Cao Yundong, et al.Arc root development and its influence on arc reigniting during the breaking process of the DC contactor[J]. Proceedings of the CSEE, 2019, 39(4): 1241-1251.
[3] 杨文英, 刘兰香, 刘洋, 等. 考虑碰撞弹跳的接触器动力学模型建立及其弹跳特性影响因素分析[J]. 电工技术学报, 2019, 34(9): 1900-1911.
Yang Wenying, Liu Lanxiang, Liu Yang, et al.Establishing of contactor dynamic model considering collision bounce and analysis of influencing factors of bounce characteristics[J]. Transactions of China Electrotechnical Society, 2019, 34(9): 1900-1911.
[4] 刘凯. 大功率直流接触器电弧仿真及实验研究[D]. 沈阳: 沈阳工业大学, 2018.
[5] Marco Amrnein, Philip T Krein.Induction machine modeling approach based on 3-D magnetic equivalent circuit framework[J]. IEEE Transaction on Magnetics, 2010, 25(2): 339-347.
[6] 陈树青. 大功率接触器设计与研究[D]. 哈尔滨: 哈尔滨工业大学, 2015.
[7] 熊德智, 陈向群, 杨杰, 等. 微型断路器灭弧失效分析及性能优化设计[J]. 电工技术学报, 2019, 34(11): 2333-2341.
Xiong Dezhi, Chen Xiangqun, Yang Jie, et al.Arc extinguishing failure analysis and performance optimization design of miniature circuit breaker[J]. Transactions of China Electrotechnical Society, 2019, 34(11): 2333-2341.
[8] Mohammed Jabbar Ajrash, Jafar Zanganeh, Behdad Moghtaderi.Methane-coal dust hybrid fuel explosion properties in a large scale cylindrical explosion chamber[J]. Journal of Loss Prevention in the Process Industries, 2016, 40: 317-328.
[9] 夏天伟, 曹云东, 洪宇. 永磁磁场对开关电器灭弧性能影响的研究[J]. 电工技术学报, 2002, 17(4): 36-39.
Xia Tianwei, Cao Yundong, Hong Yu.Research on the effect of the permanent magnetic field on arc quenching performance in switchgear[J]. Transa- ctions of China Electrotechnical Society, 2002, 17(4): 36-39.
[10] 房淑华, 林鹤云, 汪先兵, 等. 永磁安装位置对永磁接触器动态特性的影响[J]. 电工技术学报, 2009, 24(9): 93-98.
Fang Shuhua, Lin Heyun, Wang Xianbing, et al.Effect of permanent magnet arrangements on dynamic performance of permanent magnet contactor[J]. Transactions of China Electrotechnical Society, 2009, 24(9): 93-98.
[11] 张明, 王永兴, 田宇, 等. 气流场驱动下栅片中弧压提升特性的数值分析[J]. 电工技术学报, 2019, 34(13): 2752-2759.
Zhang Ming, Wang Yongxing, Tian Yu, et al.Numerical analysis of arc voltage increasing characteristics in plate driven by airflow field[J]. Transactions of China Electrotechnical Society, 2019, 34(13): 2752-2759.
[12] 庄杰榕, 许志红. 智能电磁接触器自抗扰电流模型预测控制[J]. 电工技术学报, 2018, 33(23): 5449-5458.
Zhuang Jierong, Xu Zhihong.The active disturbance rejection with current model predictive control for intelligent electromagnetic contactor[J]. Transactions of China Electrotechnical Society, 2018, 33(23): 5449-5458.
[13] 荣命哲, 杨飞, 吴翊, 等. 直流断路器电弧研究的新进展[J]. 电工技术学报, 2014, 29(1): 1-9.
Rong Mingzhe, Yang Fei, Wu Yi, et al.New developments in switching arc research in DC circuit breaker[J]. Transactions of China Electrotechnical Society, 2014, 29(1): 1-9.
[14] 刘建强, 陈爱峰, 闫一凡, 等. 高速列车电磁接触器可靠性评估方法[J]. 电工技术学报, 2018, 33(增刊2): 461-471.
Liu Jianqiang, Chen Aifeng, Yan Yifan, et al.Reliability evaluation method of electromagnetic contactor used in high-speed train[J]. Transactions of China Electrotechnical Society, 2018, 33(S2): 461-471.
[15] 程礼椿, 王步云. 低气压空气中磁吹电弧的停滞与侵蚀[J]. 电工技术学报, 1991, 6(1): 51-57.
Zhuang Lichun, Wang Buyun.Immobility and erosion of magnetic-blowout arcs in air at low atmosphere pressure[J]. Transactions of China Elec- trotechnical Society, 1991, 6(1): 51-57.
[16] 齐阳, 刘禹彤, 杨天蒙, 等. 轨道交通用空气直流断路器关键部件仿真研究综述[J]. 电器与能效管理技术, 2019(1): 1-6.
Qi Yang, Liu Yutong, Yang Tianmeng, et al.Overview of simulation research on key components of air DC circuit breaker used in rail transportation[J]. Electrical & Energy Management Technology, 2019(1): 1-6.
[17] 李兴文. 低压电器空气电弧的近期研究进展[J]. 电器与能效管理技术, 2018(22): 12-19.
Li Xingwen.Research progress on air arc of low voltage electrical appliances[J]. Electrical & Energy Management Technology, 2018(22): 12-19.
[18] 武军亮, 王明娣. 塑壳断路器中灭弧室的优化设计与试验研究[J]. 工程设计学报, 2017, 24(4): 480-486.
Wu Junliang, Wang Mingdi.Optimization design and experimental study of MCCB arc chamber[J]. Chinese Journal of Engineering Design, 2017, 24(4): 480-486.
[19] 汪倩, 屈建宇, 李兴文. 引弧板对桥式双断点断路器灭弧性能的影响[J]. 高电压技术, 2017, 43(3): 845-850.
Wang Qian, Qu Jianyu, Li Xingwen.Influences of arc plate on arc-quenching performance of bridge-shape double-break circuit breaker[J]. High Voltage Engin- eering, 2017, 43(3): 845-850.
[20] 张志强, 张国钢, 郄爽, 等. 微型断路器中灭弧栅片对电弧磁吹力的试验研究[J]. 电器与能效管理技术, 2016(15): 13-16.
Zhang Zhiqiang, Zhang Guogang, Qie Shuang, et al.Experimental study of magnetic blowout forces of splitter plates acting on electric arc in miniature circuit breakers[J]. Electrical & Energy Management Technology, 2016(15): 13-16.