基于转速信号的电机首次安装角度不对中故障检测

doi:10.19595/j.cnki.1000-6753.tces.200179

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (2007 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract

In order to improve the safety and reliability of the motor operation and reduce the misalignment phenomenon in the first installation of the motor, this paper proposed a method to detect the angular misalignment fault in the first installation of the motor based on the speed signal. This method does not require any health data and historical information, nor does it need to install additional vibration sensors. Firstly, the influence of the angular misalignment fault on the speed signal was analyzed. The fast Fourier transform and the least square method were used to analyze the speed signal. According to the coefficient of the quadratic term of the curve fitted by the change of the twice frequency amplitude with the rotation speed, and combined with the S-type distribution membership function, then the first installation misalignment of the motor was comprehensively evaluated. Finally, the simulation model and experimental platform of permanent magnet synchronous motor (PMSM) were built. The results show that the method is feasible and effective for the detection of angle misalignment fault in the first installation of PMSM, and has a great application prospect.

Key words： Permanent magnet synchronous motor first installation misalignment speed signal

Received: 23 February 2020

PACS:

TM315

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Yang Ming
	Huang Xu
	Ren Boyang
	Chai Na
	Xu Dianguo

Cite this article:

Yang Ming,Huang Xu,Ren Boyang等. Angle Misalignment Fault Detection Method of Motor's First Installation Based on Speed Signal[J]. Transactions of China Electrotechnical Society, 2021, 36(15): 3191-3199.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.200179 OR https://dgjsxb.ces-transaction.com/EN/Y2021/V36/I15/3191

[1] Reddy M C S, Sekhar A. Detection and monitoring of coupling misalignment in rotors using torque measurements[J]. Measurement, 2015, 61: 111-122.
[2] Wowk V.Machinery vibration alignment[M]. New York: McGraw-Hill Education, 2000.
[3] Umbrajkaar A, Krishnamoorthy A.Vibration analysis using wavelet transform and fuzzy logic for shaft misalignment[J]. Journal of Vibroengineering, 2018, 20(8): 2855-2865.
[4] 夏松波, 张新江, 刘占生, 等. 旋转机械不对中故障研究综述[J]. 振动·测试与诊断, 1998, 18(3): 157-161.
Xia Songbo, Zhang Xinjiang, Liu Zhansheng, et al.A survey of research on misalignment of rotary machinery[J]. Vibration. Test and Diagnosis, 1998, 18(3): 157-161.
[5] Saavedra P, Ramirez D.Vibration analysis of rotors for the identification of shaft misalignment part1: theoretical analysis[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2004, 218(9): 971-985.
[6] Xu M, Marangoni R.Vibration analysis of a motor-flexible coupling-rotor system subject to misalignment and unbalance, part I: theoretical model and analysis[J]. Journal of Sound and Vibration, 1994, 176(5): 663-679.
[7] 黄典贵, 蒋滋康. 交角不对中轴系的扭振特性分析[J]. 汽轮机技术, 1995, 37(3): 150-152.
Huang Diangui, Jiang Zikang.Analysis of torsional vibration characteristics of shaft system with angular misalignment[J]. Steam Turbine Technology, 1995, 37(3): 150-152.
[8] 刘杨, 太兴宇, 姚红良, 等. 双盘转子轴承系统不对中-碰摩耦合故障分析[J]. 振动·测试与诊断, 2013, 33(5): 819-823.
Liu Yang, Tai Xingyu, Yao Hongliang, et al.Analysis of misalignment rub impact coupling fault of double disk rotor bearing system[J]. Vibration, Test and Diagnosis, 2013, 33(5): 819-823.
[9] 李明. 转角不对中故障的转子系统非线性动力学特征[J]. 振动·测试与诊断, 2011, 31(5): 552-556.
Li Ming.Nonlinear dynamic characteristics of rotor system with angular misalignment fault[J]. Vibration, Test and Diagnosis, 2011, 31(5): 552-556.
[10] Antonino-Daviu J, Popaleny P.Detection of induction motor coupling unbalanced and misalignment via advanced transient current signature analysis[C]// 2018 XIII International Conference on Electrical Machines (ICEM), Alexandroupoli, Greece, 2018: 2359-2364.
[11] Verucchi C, Bossio J, Bossio G, et al.Misalignment detection in induction motors with flexible coupling by means of estimated torque analysis and MCSA[J]. Mechanical Systems and Signal Processing, 2016, 80(12): 570-581.
[12] Reddy M C S, Sekhar A S. Detection and monitoring of coupling misalignment inrotors using torque measurements[J]. Measurement, 2015, 61: 111-122.
[13] Yang Ming, Chai Na, Liu Zirui, et al.Motor speed signature analysis for local bearing fault detection with noise cancellation based on improved drive algorithm[J]. IEEE Transactions on Industrial Electronics, 2020, 67(5): 4172-4182.
[14] Bhattacharya I, Getoor L.A latent dirichlet model for unsupervised entity resolution[C]//Proceedings of the 2006 SIAM International Conference on Data Mining, Bethesda, MD, USA, 2006: 47-58.
[15] Haroun S, Seghir A N, Touati S.Misalignment fault detection and diagnosis using AR model of torque signal[C]//IEEE International Symposium on Diagnostics, Guarda, Portugal, 2015: 322-326.
[16] 刘杨, 李炎臻, 石拓, 等. 转子-滑动轴承系统不对中-碰摩耦合故障分析[J]. 机械工程学报, 2016, 52(13): 79-86.
Liu Yang, Li Yanzhen, Shi Tuo, et al.Analysis of rotor sliding bearing system misalignment rub impact coupling fault[J]. Journal of Mechanical Engineering, 2016, 52(13): 79-86.