基于自适应变步长最小均方算法的磁悬浮高速电机不平衡补偿

doi:10.19595/j.cnki.1000-6753.tces.190386

Abstract
Figure/Table
References
Related Citation (9)

Download: PDF (71398 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract For unbalance vibration in magnetically levitated high-speed motors, a modified adaptive variable step-size least mean square (LMS) algorithm was proposed to achieve unbalance compensation. Firstly, a formula to get appropriate step size was given by analyzing the influence of step size and frequency on the characteristics of LMS algorithm. Then, with the help of an adaptive filter based on variable step-size LMS algorithm, the minimum displacement control was achieved by online identifying speed-frequency component in displacement signal and adding feedback control. In addition, the stability of closed-loop system was analyzed using generalized root locus. In order to achieve unbalance compensation within the whole speed range, a varying step-size sign strategy was used. Finally, the proposed method was applied to the simulation model of four-degree-of-freedom rotor under the four conditions of frequency matching, frequency mismatching, noise existing and constant acceleration, and relevant experiments were carried out on the magnetically levitated high-speed motor rotor system test platform. Simulation and experimental results show that the proposed method can effectively suppress the imbalance synchronous vibration.

Key words： Magnetically levitated high-speed motor unbalance compensation least mean square (LMS) root locus

Received: 08 April 2019 Published: 12 May 2020

PACS:

TM351

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhou Tianhao
	Chen Lei
	Zhu Changsheng
	Li Pengfei

Cite this article:

Zhou Tianhao,Chen Lei,Zhu Changsheng等. Unbalance Compensation for Magnetically Levitated High-Speed Motors Based on Adaptive Variable Step Size Least Mean Square Algorithm[J]. Transactions of China Electrotechnical Society, 2020, 35(9): 1900-1911.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.190386 OR https://dgjsxb.ces-transaction.com/EN/Y2020/V35/I9/1900

[1] 于洁, 祝长生, 余忠磊. 考虑涡流的自传感主动电磁轴承转子位置估计策略[J]. 电工技术学报, 2018, 33(9): 1946-1956.
Yu Jie, Zhu Changsheng, Yu Zhonglei.Rotor position estimation strategy for self-sensing active magnetic bearing considering eddy currents[J]. Transactions of China Electrotechnical Society, 2018, 33(9): 1946-1956.
[2] 陈亮亮, 祝长生, 王忠博. 基于逆系统解耦的电磁轴承飞轮转子系统二自由度控制[J]. 电工技术学报, 2017, 32(23): 100-114.
Chen Liangliang, Zhu Changsheng, Wang Zhongbo.Two-degree-of-freedom control for active magnetic bearing flywheel rotor system based on inverse system decoupling[J]. Transactions of China Electro- technical Society, 2017, 32(23): 100-114.
[3] 陈杰, 邓智泉, 杨艳. 无轴承开关磁阻电机质量偏心振动补偿[J]. 电工技术学报, 2016, 31(18): 13-20.
Chen Jie, Deng Zhiquan, Yang Yan.Compensation of mass eccentricity for a bearingless switched relu- ctance motor[J]. Transactions of China Electro- technical Society, 2016, 31(18): 13-20.
[4] Schweitzer G, Maslen E.Magnetic bearings: theory, design and application to rotating machinery[M]. Berlin: Springer, 2009.
[5] Shafai B, Beale S, Larocca P, et al.Magnetic bearing control systems and adaptive forced balancing[J]. IEEE Control Systems, 1994, 14(2): 4-13.
[6] Herzog R, Buhler P, Gahler C, et al.Unbalance compensation using generalized notch filters in the multivariable feedback of magnetic bearings[J]. IEEE Transactions on Control Systems Technology, 1996, 4(5): 580-586.
[7] 孙岩桦, 罗岷, 虞烈. 基于自适应陷波器的电磁轴承不平衡补偿方法[J]. 振动工程学报, 2000, 13(4): 610-615.
Sun Yanhua, Luo Min, Yu Lie.Unbalance com- pensation based on adaptive notch filter to active magnetic bearings[J]. Journal of Vibration Engin- eering, 2000, 13(4): 610-615.
[8] Nonami K, Qifu F, Ueyama H.Unbalance vibration control of magnetic bearing systems using adaptive algorithm with disturbance frequency estimation[J]. JSME International Journal, 2008, 41(2): 220-226.
[9] Betschon F, Knospe C R.Reducing magnetic bearing currents via gain scheduled adaptive control[J]. IEEE/ASME Transactions on Mechatronics, 2001, 6(4): 437-443.
[10] Lum K Y, Coppola V T, Bernstein D S.Adaptive autocentering control for an active magnetic bearing supporting a rotor with unknown mass imbalance[J]. IEEE Transactions on Control Systems Technology, 1996, 4(5): 587-597.
[11] Rundell A, Drakunov S, Decarlo R.A sliding mode observer and controller for stabilization of rotational motion of a vertical shaft magnetic bearing[J]. IEEE Transactions on Control Systems Technology, 1996, 4(5): 598-608.
[12] Mohamed A, Ilene B.Imbalance compensation and automatic balancing in magnetic bearing systems using the Q-parameterization theory[C]//Proceedings of American Control Conference, Baltimore, Maryland, USA, 1994: 2952-2957.
[13] 韩邦成, 崔华, 汤恩琼. 基于滑模扰动观测器的磁轴承主动振动控制[J]. 光学精密工程, 2012, 20(3): 563-570.
Han Bangcheng, Cui Hua, Tang Enqiong.Vibration suppression of magnetic bearing based on sliding mode disturbance observer[J]. Optics and Precision Engineering, 2012, 20(3): 563-570.
[14] 蒋科坚, 祝长生. 基于不平衡识别的主动电磁轴承转子系统自动平衡[J]. 振动工程学报, 2009, 22(6): 559-564.
Jiang Kejian, Zhu Changsheng.Auto balance of active magnetic bearings for rotor support system by means of unbalance identification[J]. Journal of Vibration Engineering, 2009, 22(6): 559-564.
[15] Zheng Shiqiang, Feng Rui.Feedforward com- pensation control of rotor imbalance for high-speed magnetically suspended centrifugal compressors using a novel adaptive notch filter[J]. Journal of Sound and Vibration, 2016, 366: 1-14.
[16] Setiawan J, Mukherjee R, Maslen E.Synchronous disturbance compensation in active magnetic bearings using bias current excitation[C]//Proceedings of IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Como, Italy, 2001: 707-712.
[17] Matras A, Flowers G, Fuentes R, et al.Suppression of persistent rotor vibrations using adaptive tech- niques[J]. Journal of Vibration and Acoustics, 2003, 128(6): 682-689.
[18] Chiacchiarini H, Mandolesi P.Unbalance compen- sation for active magnetic bearings using ILC[C]// Proceedings of IEEE International Conference on Control Applications, Mexico City, Mexico, 2001: 58-63.
[19] 龙亚文, 谢振宇, 徐欣. 磁悬浮轴承H_∞ 鲁棒控制策略研究[J]. 振动与冲击, 2013, 32(23): 115-120.
Long Yawen, Xie Zhenyu, Xu Xin.H_∞ robust control strategy for an active magnetic bearing[J]. Journal of Vibration and Shock, 2013, 32(23): 115-120.
[20] 蒋科坚, 祝长生. 主动电磁轴承转子系统自适应不平衡补偿控制[J]. 浙江大学学报: 工学版, 2011, 45(3): 503-509.
Jiang Kejian, Zhu Changsheng.Adaptive unbalance compensation control of active magnetic bearing sup- porting rotor system[J]. Journal of Zhejiang University: Engineering Science, 2011, 45(3): 503-509.
[21] Nezamabadi R, Poshtan J, Jahed-Motlagh M.Robust control design to imbalance compensation and automatic balancing of magnetic bearings[C]// Proceedings of IEEE International Conference on Industrial Technology, Mumbai, India, 2006: 1093-1098.
[22] 高辉, 徐龙祥. LMS类算法在磁轴承滤波补偿中的应用分析[J]. 中国机械工程, 2011, 22(1): 9-14.
Gao Hui, Xu Longxiang.Analysis of kinds of LMS algorithms in application of filtering compensation for magnetic bearings[J]. China Mechanical Engin- eering, 2011, 22(1): 9-14.