磁通可控永磁同步电动机的磁化

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (881 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The paper proposes a novel permanent magnet synchronous motor with controllable flux. The unique rotor structure makes the performance of magnets could be changed by d-axis current pulse. At the same time, q-axis magnetic motive force, produced by load current, could not influence the statement of magnets. To the analysis of magnetization process of permanent magnets, the paper builds a magnetization model including initial magnetization and repeated magnetization in which magnetization ratio curve is expended. Then combine magnetization model and local magnetic hysteresis loops into determining the state of magnet. On the basis of the model, the paper computes magnetization magnetic field and EMF by finite element method. Prototype test results are consistent with those by finite element method, showing the effectiveness in flux weakening and applicability of the magnetization models.

Key words： Permamenr magnet synchronous motor magnetization model flux weakening finite element method

Received: 20 December 2007 Published: 18 February 2014

PACS:

TM351

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhu Changqing
	Wang Xiuhe
	Yang Yubo
	Zhang Ran

Cite this article:

Zhu Changqing,Wang Xiuhe,Yang Yubo等. Magnetization of a Controllable Flux Permanent Magnet Synchronous Motor[J]. Transactions of China Electrotechnical Society, 2009, 24(12): 63-67.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2009/V24/I12/63

[1] 王秀和.永磁电机[M]. 北京：中国电力出版社, 2007.
[2] Sagawa M, Fuzimura S, Togawa N, et al. New material for permanent magnets on a base of Nd and Fe[J]. J. Appl. Phys., 1984, 55(6): 2083-2087.
[3] Morimoto S. Expansion of operating limits for permanent magnet motor by current vector control considering inverter capacity[J]. IEEE Trans. Ind. Applicat., 1990, 26(5): 866-871.
[4] Jahns T M. Flux-weakening regime operation of an interior permanent-magnet synchronous motor drive[J]. IEEE Trans. Ind. Appli., 1987, 23(4): 681-689.
[5] Chalmers B J, Akmese R, Musaba L. Design and field-weakening performance of permanent-magnet/ reluctance motor with two-part rotor[J]. Proc. IEE- Elect. Power Appli., 1998, 145(2): 133-139.
[6] Xu L, Ye L. A new design concept of permanent magnet machine for flux weakening operation[J]. IEEE Transactions on Industry Applications, 1995, 31(2): 373-378.
[7] Nipp E. Alternative to field-weakening of surface- mounted permanent-magnet motors for variables- speed drives[C]. Conf. Rec. IEEE-IAS Annu. Meeting, 1995, 1: 191-198.
[8] Shakal A, Liao Y, Lipo T A. A permanent magnet AC machine structure with true fied weakening capability[C]. Conf. Rec. IEEE Int. Symp. Industrial Electronics, 1993: 19-24.
[9] Sebastian T, Slemon G R, Rahman M A. Modeling of permanent magnet synchronous motors[J]. IEEE Trans. Mag., 1986, MAG-22(5): 1069-1071.
[10] Ostovic V. Memory motors[J]. IEEE Industry Application Magazine, 2003, 1(1): 52-61.
[11] Nakahata A, Kadoya K, Kawase Y, et al. 3-D finite-element analysis of electromagnets with permanent magnet taking into account magnetizing process[J]. IEEE Trans. on Magnetics, 1997, 33(2): 2057-2060.
[12] Nakata T, Takahashi N. Numerical analysis of transient magnetic field in a capacitor-discharge impulse magnetizer[J]. IEEE Trans. on Magnetics, 1986, 22(5): 526-528.
[13] 赵国生. 磁滞数学模型及考虑磁滞时磁场数值计算[M]. 济南：黄河水利出版社, 2004.
[14] Kawase Y, Yamaguchi T, Mimura N, et al. Analysis of magnetization process using discharge current of capacitor by 3-D finite element method[J]. IEEE Trans. on Magnetics, 2002, 38(2): 1145-1148.