软磁复合材料-Si钢组合铁心盘式横向磁通永磁无刷电机

doi:10.19595/j.cnki.1000-6753.tces.190594

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (6368 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The disk transverse flux permanent magnet brushless motor (DTFM) has a great potential application due to its decoupling between the electric load and the magnetic load, higher power density as well as shorter axial length. According to the principle features of the DTFM as well as complementary ferromagnetic properties of the soft magnetic composite (SMC) material and laminated silicon steel materials (Si-Steel), the SMC-Si Steel (SMC-Si) cores DTFM is presented in the paper in order to make further improvement on its performance. First, the theoretical structure of SMC-Si DTFM is introduced, and its superior performance is confirmed by comparison with its counterpart DTFMs made of Si-Steel cores and SMC cores respectively. Then the methods to weaken cogging torque of the SMC-Si cores DTFM are studied. At last, the prototyped SMC-Si cores DTFM is manufactured and tested.

Key words： Disk transverse flux permanent magnet brushless motor soft magnetic composite (SMC) SMC-Si cores cogging ripple

Received: 15 May 2019 Published: 12 March 2020

PACS:

TM383.6

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Xu Yanliang
	Cui Bo
	Zhang Wenjing
	Xue Chengyong

Cite this article:

Xu Yanliang,Cui Bo,Zhang Wenjing等. Disk Transverse Flux Permanent Magnet Brushless Motor Based on Soft Magnetic Composite-Si Steel Core[J]. Transactions of China Electrotechnical Society, 2020, 35(5): 983-990.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.190594 OR https://dgjsxb.ces-transaction.com/EN/Y2020/V35/I5/983

[1] Yuta Yamamoto, Takafumi Koseki, Yasuadi Anoyama.Proposal of C-core type transverse flux motor for ship propulsion-increasing torque density by dense stator configuration[C]//Advanced Electromagnetics Symposium, AES 2013, Sharjah-United Arab Emirates, 2013: 1-7.
[2] 徐衍亮, 吴巧变, 宫晓. 新型盘式横向磁通永磁无刷电机的变网络等效磁路模型[J]. 电工技术学报, 2016, 31(17): 147-153.
Xu Yanliang, Wu Qiaobian, Gong Xiao.Network-varying equivalent magnetic circuit modeling of novel disk transverse-flux permanent magnet brushless machine[J]. Transactions of China Electrotechnical Society, 2016, 31(17): 147-153.
[3] 罗德荣, 贺锐智, 黄守道, 等. 单定子双转子盘式对转永磁同步电机动态滑模控制[J]. 电工技术学报, 2019, 34(9): 1806-1814.
Luo Derong, He Ruizhi, Huang Shoudao, et al.Dynamic sliding mode control for single stator dual rotor disk counter-rotating permanent magnet synchronous motor[J]. Transactions of China Electrotechnical Society, 2019, 34(9): 1806-1814.
[4] 何海翔, 陈志辉, 梅庆枭, 等. 聚磁型无源转子横向磁通永磁电机电磁力及转子机械强度的分析[J]. 电工技术学报, 2017, 32(15): 10-16.
He Haixiang, Chen Zhihui, Mei Qingxiao, et al.Analysis of electromagnetic force and rotor mechanical strength on flux-concentrating transverse flux PM machine with passive rotor[J]. Transactions of China Electrotechnical Society, 2017, 32(15): 10-16.
[5] 崔波. SMC-Si组合铁心盘式横向磁通永磁无刷电机及其驱动控制系统研究[D]. 济南: 山东大学, 2018.
[6] 赵国新, 孔德财, 高晓林. 软磁复合材料与硅钢片材料的永磁电机性能差异研究[J]. 电工技术学报, 2018, 33(增刊1): 75-81.
Zhao Guoxin, Kong Decai, Gao Xiaolin.Performance difference study on permanent magnet synchronous motor based on soft magnetic composite material and silicon steel sheet[J]. Transactions of China Electrotechnical Society, 2018, 33(S1): 75-81.
[7] Bures R, Streckova M, Mária Fáberová, et al.Advances in power metallurgy soft magnetic composite materials[J]. Archives of Metallurgy and Materials, 2017, 62(2B): 1149-1154.
[8] Liu Chengcheng, Lei Gang, Wang Tianshi, et al.Comparative study of small electrical machines with soft magnetic composite cores[J]. IEEE Transactions on Industrial Electronics, 2017, 64(2): 1049-1060.
[9] Jamie Washington, Cristofaro Pompermaier, Lars Sjoberg.Application of the latest soft magnetic composites to a hybrid brushless DC motor for a compressor application[C]//Soft Magnetic Materials Conference (SMM22), Sao Paulo, Brazil, 2015: 1-6.
[10] 王韶鹏, 刘成成, 汪友华, 等. 软磁复合材料永磁电机的6σ稳健多学科设计优化方法[J]. 电工技术学报, 2019, 34(4): 637-645.
Wang Shaopeng, Liu Chengcheng, Wang Youhua, et al.6σ robust multidisciplinary design optimization method for magnet motors with soft magnetic composite cores[J]. Transactions of China Electrotechnical Society, 2019, 34(4): 637-645.
[11] Qu Ronghai, Lipo T A.Analysis and modeling of air-gap and zigzag leakage fluxes in a surface-mounted-PM machine[C]//Conference Record of the 2002 IEEE Industry Applications Conference, 37th IAS Annual Meeting, Pittsburgh, USA, 2002: 13-18.
[12] Deng Qiuling, Peng Xiao, Xie Weicai.Design of axial flux permanent magnet synchronous generators with soft magnetic compound(SMC) stator core[C]//2009 International Conference on Energy and Environment Technology, Guilin, China, 2009, 2:119-122.
[13] 徐衍亮, 王冰冰, 高启龙, 等. 软磁复合材料及其在永磁无刷电机中的应用[J]. 电机与控制学报, 2018, 22(4): 75-80.
Xu Yanliang, Wang Bingbing, Gao Qilong, et al.Soft magnetic composite material and its application on permanent magnet brushless motors[J]. Electric Machines and Control, 2018, 22(4): 75-80.
[14] 宫晓, 徐衍亮, 冯开杰. 新型盘式横向磁通永磁电机及其空载电动势波形的解析计算[J]. 电工技术学报, 2014, 29(7): 77-82.
Gong Xiao, Xu Yanliang, Feng Kaijie.A novel disc transverse-flux permanent magnet brushless machine[J]. Transactions of Electrotechnical Society, 2014, 29(7): 77-82.
[15] Xu Longjiang, Xu Yanliang, Gong Jinlin.Analysis and optimization of cogging torque in yokeless and segmented armature[J]. IEEE Transaction on Magnetics, 2018, 54(11): 8106005.