大气压等离子体制备超疏水表面及其防冰抑霜研究

doi:10.19595/j.cnki.1000-6753.tces.181708

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (36987 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Super-hydrophobic film was deposited on the glass substrate through plasma enhanced chemical vapor deposition (PE-CVD) at atmospheric pressure. The discharge was generated by a home-made dielectric barrier discharge (DBD) source to achieve large-area deposition. At the same time, argon gas was used as the working gas, and hexamethyldisilazane (HMDSN) was used as the precursor monomer. The super-hydrophobic surface was successfully fabricated through the DBD plasma deposition under 13.56MHz RF power excitation. The static contact angle was as high as 171.4 degrees and the sliding angle was less than 2 degrees. The optical emission spectrometry (OES) of discharge revealed that the monomer was dissociated during the deposition process, generating a large amount of hydrophobic groups. Meanwhile, nitrogen and oxygen in the air are also involved in the reactions, but not affecting the hydrophobicity of fabricated film. Atomic force microscope (AFM) and scanning electron microscope (SEM) show that the super-hydrophobic surface has a uniform micro-nano-scale roughness structure with an average roughness of about 200nm. A series of low- temperature tests were carried out in a self-made semiconductor refrigeration cavity, and it showed that the super-hydrophobic surface exhibited a good ability to prolong the formation process of icing and restrain frost.

Key words： Plasma dielectric barrier discharge super-hydrophobic film anti-icing anti-frosting

Received: 05 November 2018 Published: 30 December 2019

PACS:

O53

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhang Xun
	Zeng Huarong
	Tian Chengyue
	Ma Xiaohong
	Xiong Qing

Cite this article:

Zhang Xun,Zeng Huarong,Tian Chengyue等. Super-Hydrophobic Surface Prepared by Atmospheric-Pressure Plasma and Its Anti-Icing, Anti-Frosting Performance[J]. Transactions of China Electrotechnical Society, 2019, 34(24): 5289-5296.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.181708 OR https://dgjsxb.ces-transaction.com/EN/Y2019/V34/I24/5289

[1] Lu Y, Sathasivam S, Song J.Repellent materials. Robust self-cleaning surfaces that function when exposed to either air or oil[J]. Science, 2015, 347(6226): 1132-1135.
[2] 戴栋, 宁文军, 邵涛, 等. 大气压低温等离子体的研究现状与发展趋势[J]. 电工技术学报, 2017, 32(20): 1-9.
Dai Dong, Ning Wenjun, Shao Tao, et al.A review on the state of art and future trends of atmospheric pressure low temperature plasmas[J]. Transactions of China Electrotechnical Society, 2017, 32(20): 1-9.
[3] Jung Stefan, Marko Dorrestijn, Dominik Raps.Are superhydrophobic surfaces best for icephobicity[J]. Langmuir: the ACS Journal of Surfaces and Colloids, 2011, 27(6): 3059-3066.
[4] Wong T S, Kang S H, Tang S K Y. Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity[J]. Nature, 2011, 477(7365): 443-447.
[5] Liao Ruijin, Zuo Zhiping, Guo Chao.Fabrication of superhydrophobic surface on aluminum by continuous chemical etching and its anti-icing property[J]. Applied Surface Science, 2014, 317: 701-709.
[6] Matsumoto K, Kobayashi T.Fundamental study on adhesion of ice to cooling solid surface[J]. Inter- national Journal of Refrigeration, 2007, 30(5): 851-860.
[7] Varanasi K K, Deng T, Smith J D. Frost formation and ice adhesion on superhydrophobic surfaces[J]. Applied Physics Letters, 2010, 97(23): 234102(1-3).
[8] Tuteja A, Choi W, Maminglin. Designing super- oleophobic surfaces[J]. Science, 2007, 318(5856): 1618-1622.
[9] 聂万胜, 周思引, 车学科. 纳秒脉冲放电等离子体助燃技术研究进展[J]. 高电压技术, 2017, 43(6): 1749-1758.
Nie Wansheng, Zhou Siyin, Che Xueke.Review of plasma assisted combustion technology by nanosecond pulsed discharge[J]. High Voltage Engineering, 2017, 43(6): 1749-1758.
[10] Huang Chun, Lin Hsin-Hua, Li Chun.Atmospheric pressure plasma polymerization of super-hydrophobic nano-films using hexamethyldisilazane monomer[J]. Plasma Chemistry & Plasma Processing, 2015, 35(6): 1015-1028.
[11] Kodaira F V P, Castro A H R, Prysiazhnyi V. Characterization of plasma polymerized HMDSN films deposited by atmospheric plasma jet[J]. Surface & Coatings Technology, 2017, 312: 117-122.
[12] Huang Chun, Wu Shin Yi, Tsai Ching Yuan.The growth of organosilicon film using a hexamethyldi- silazane/oxygen atmospheric pressure plasma jet[J]. Thin Solid Films, 2013, 529(2): 292-295.
[13] 方志, 张波, 周若瑜. HMDSO添加对大气压Ar等离子体射流阵列放电特性的影响[J]. 高电压技术, 2017, 43(6): 1775-1783.
Fang Zhi, Zhang Bo, Zhou Ruoyu.Effect of HMDSO addition on discharge characteristics of atmospheric pressure plasma jet array in argon[J]. High Voltage Engineering, 2017, 43(6): 1775-1783.
[14] 商克峰, 王浩, 岳帅. 结构及供电电源对沿面介质阻挡放电装置放电特性及臭氧生成的影响[J]. 电工技术学报, 2017, 32(2): 53-60.
Shang Kefeng, Wang Hao, Yue Shuai.Effect of configuration and power supply on the discharge characteristics and ozone generation of a surface dielectric barrier discharge device[J]. Transactions of China Electrotechnical Society, 2017, 32(2): 53-60.
[15] Zhang Li, Yang Dezheng, Wang Sen.Spatiotemporal characteristics of nanosecond pulsed discharge in an extremely asymmetric electric field at atmospheric pressure[J]. Plasma Science and Technology, 2017, 19(6): 42-48.
[16] Zhang Bo, Zhu Yin, Liu Feng.The influence of grounded electrode positions on the evolution and characteristics of an atmospheric pressure argon plasma jet[J]. Plasma Science and Technology, 2017, 19(6): 7-13.
[17] Wong Qi, Wang Yanhui, Wang Haochen.Investi- gation of NO removal using a pulseassisted RF discharge[J]. Plasma Science and Technology, 2017, 19(6): 93-98.
[18] 张仲麟, 聂秋月, 王志斌, 等. 大气压介质阻挡放电双频调制技术数值模拟研究[J]. 电工技术学报, 2017, 32(8): 48-54.
Zhang Zhonglin, Nie Qiuyue, Wang Zhibin, et al.Numerical studies on the modulated strategy of atmospheric pressure dielectric barrier discharge plasmas driven by dual-frequency[J]. Transactions of China Electrotechnical Society, 2017, 32(8): 48-54.
[19] 李平, 穆海宝, 虞春艳, 等. 低气压板-板与多针-板电极结构甲烷气体介质阻挡放电的对比[J]. 高电压技术, 2017, 43(6): 1816-1821.
Li Ping, Mu Haibao, Yu Chunyan.Comparison of DBD in methane between parallel-plate and multi- needles to plate electrode in low pressure[J]. High Voltage Engineering, 2017, 43(6): 1816-1821.
[20] Ma Weichun, Lin Chinho, Huang Chun.Deposition of fluorine-containing thin film by atmospheric pressure plasma jet and film surface structural transition[J]. Plasma Processes & Polymers, 2015, 12(4): 362-371.
[21] Kylián O, Petr M, Serov A.Hydrophobic and super-hydrophobic coatings based on nanoparticles overcoated by fluorocarbon plasma polymer[J]. Vacuum, 2014, 100(2): 57-60.
[22] Yang Shih Hsien, Liu Chi-Hung, Su Chun-Hsien.Atmospheric-pressure plasma deposition of SiO_x films for super-hydrophobic application[J]. Thin Solid Films, 2009, 517(17): 5284-5287.
[23] Xiong Qing, Nikiforov A Y, Lu Xinpei.High-speed dispersed photographing of an open-air argon plasma plume by a grating-ICCD camera system[J]. Journal of Physics D: Applied Physics, 2010, 43(41): 415201.
[24] Volmer M, Weber A.Germ-formation in over- saturated figures[J]. 1926.
[25] Yang Shuaqing, Xia Qiang, Zhu Lin.Research on the icephobic properties of fluoropolymer-based materials[J]. Applied Surface Science, 2011, 257(11): 4956-4962.
[26] 陈小娇, 武卫东, 汪德龙. 超疏水表面抑制结霜研究进展[J]. 表面技术, 2015(2): 87-92.
Chen Xiaojiao, Wu Weidong, Wang Delong.Research progress in anti-frosting performance of super- hydrophobic surfaces[J]. Surface Technology, 2015(2): 87-92.