CFD分析车用电机螺旋水路的散热特性

doi:10.19595/j.cnki.1000-6753.tces.161413

Abstract
Figure/Table
References
Related Citation (7)

Download: PDF (31619 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract It is crucial to design the suitable cooling system applied in electric machine for EVs. The heat dissipation has a great influence on the reliable operation of the motor in EVs. In the paper, the spiral channel cooling system is studied with three different dimension ratios (b/a=1,2,3) of inlet surface in computational fluid dynamics (CFD) simulation. Given the same area of inlet airflow, fluent parameters are compared in CFD, such as velocity, heat transfer coefficient and pump power, etc. The dimensional parameters are used for further thermal analysis of the completed machine by FEM coupling simulation. Finally, the images on the shell thermal distribution are recorded by infrared instrumentation, measurement results are determined by PT100 embedded in winding end. Experimental validation is presented in the paper, which could provide some reference for the research of cooling approach applied in motor for EVs.

Key words： Computational fluid dynamics (CFD) spiral channel airflow heat transfer coefficient thermal coupling analysis

Received: 05 September 2016 Published: 05 March 2018

PACS:

TM315

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Wang Xiaoyuan
	Du Jingjuan

Cite this article:

Wang Xiaoyuan,Du Jingjuan. CFD Analysis of Heat Transfer Characterization in Spiral Channel Cooling for Permanent Magnet Electric Machine in EVs[J]. Transactions of China Electrotechnical Society, 2018, 33(4): 955-963.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.161413 OR https://dgjsxb.ces-transaction.com/EN/Y2018/V33/I4/955

[1] 温旭辉. 电动汽车电机驱动技术现状与发展综述[J]. 电力电子, 2013(2): 5-9.
Wen Xuhui.Present situation and development of electric motor drive technology in electric vehicle application[J]. Power Electronics, 2013(2): 5-9.
[2] Moon Sung-Hyun, Yun Jang-Ho, Kim Wan-Gi, et al.Thermal-flow analysis and cooling performance enhancement of a totally enclosed fan-cooled motor[C]//Proceedings of the ICEMS, Busan, South Korea, 2013: 2028-2030.
[3] Streibl B, Heudorfer H.Investigating the air flow rate of self-ventilated traction motors by means of computational fluid dynamics[C]//SPEEDAM ISPE, Pisa, Italy, 2010: 736-739.
[4] 丁树业, 王海涛, 邓艳秋, 等. 异步驱动电机流体流动特性数值研究[J]. 中国电机工程学报, 2016, 36(4): 1127-1133.
Ding Shuye, Wang Haitao, Deng Yanqiu, et al.Numerical investigation of fluid flow characteristics for asynchronous driving motor[J]. Proceedings of the CSEE, 2016, 36(4): 1127-1133.
[5] 路义萍, 汤璐, 丰帆, 等. 隐机同步电动机冷却空气流场特性研究[J]. 中国电机工程学报, 2013, 33(15): 86-91.
Lu Yiping, Tang Lu, Feng Fan, et al.Research on flow field characteristics of cooling air in a non-salient pole synchronous motor[J]. Proceedings of the CSEE, 2013, 33(15): 86-91.
[6] Meksi O, Vargas A O.Numerical and experimental determination of external heat transfer coefficient in small TENV electric machines[J]. Proceedings of the ECCE, 2015: 2742-2749.
[7] Yoheswaran B, Pullen K R.Flow and convective heat transfer in disk-type electric machines with coolant flow[J]. Proceedings of the ICEMS, Berlin, Germany, 2014: 2165-2171.
[8] Howey D A, Holmes A S, Pullen K R.Measurement and CFD prediction of heat transfer in air-cooled disc-type electrical machines[J]. IEEE Transactions on Industrial Application, 2011, 47(4): 1716-1723.
[9] Moradnia P, Chernoray V, Nilsson H.Experimental assessment of a fully predictive CFD approach for flow of cooling air in an electric generator[J]. Applied Energy, 2014, 124(1): 223-230.
[10] 丁树业, 葛云中, 徐殿国. 1.5MW双馈风力发电机内流体场分析[J]. 中国电机工程学报, 2012, 32(21): 93-98.
Ding Shuye, Ge Yunzhong, Xu Dianguo, et al.Analyses of fluid field inside a 1.5MW doubly-fed wind generator[J]. Proceedings of the CSEE, 2012, 32(21): 93-98.
[11] 张凤阁, 杜光辉, 王天煜, 等. 1.12MW高速永磁电机多物理场综合设计[J]. 电工技术学报, 2015, 30(12): 171-180.
Zhang Fengge, Du Guanghui, Wang Tianyi, et al.Integrated design of 1.12MW high speed PM machine based on multi-physics fields[J]. Transaction of China Electrotechnical Society, 2015, 30(12): 171-180.
[12] Huang Zhe, Marquez F, Alakula M, et al.Characteri- zation and application of forced cooling channels for traction motors in HEVs[J]. Proceedings of the ICEMS, Marseille, France, 2012: 1212-1218.
[13] 王晓远, 杜静娟. 应用CFD流固耦合热分析车用高功率密度电机的水冷系统[J]. 电工技术学报, 2015, 30(9): 30-38.
Wang Xiaoyuan, Du Jingjuan.Design and analysis of water cooling system for HEVs high-power-density motor using CFD and thermal technology[J]. Transa- ctions of China Electrotechnical Society, 2015, 30(9): 30-38.
[14] 韩占忠, 王敬, 兰小平. Fluent-流体工程仿真计算实例与应用[M]. 2版. 北京: 北京理工大学出版社, 2010.
[15] Staton D A, Cavagnino A.Convection heat transfer and flow calculations suitable for electric machines thermal models[J]. IEEE Transactions on Industrial Electronics 2008, 55(10): 3509-3516.
[16] 梁培鑫, 裴宇龙, 甘磊, 等. 高功率密度轮毂电机温度场建模研究[J]. 电工技术学报, 2015, 30(14): 170-176.
Liang Peixin, Pei Yulong, Gan Lei, et al.Research of temperature field modeling for high power-density in-wheel motor[J]. Transactions of China Electro- technical Society, 2015, 30(14): 170-176.
[17] 孔晓光, 王凤翔, 邢军强. 高速永磁电机的损耗计算与温度场分析[J]. 电工技术学报, 2012, 27(9): 166-173.
Kong Xiaoguang, Wang Fengxiang, Xing Junqiang.Loss calculation and temperature field analysis of high speed permanent magnet machines[J]. Transa- ctions of China Electrotechnical Society, 2012, 27(9): 166-173.