N型连接器无源互调特征建模与实验研究

doi:10.19595/j.cnki.1000-6753.tces.161074

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (8197 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In this paper, three different types of nonlinear current-voltage mathematical models are presented and compared at first. High order series nonlinear model is developed accordingly. In order to analyze the effect of model parameters on the intermodulation harmonics, the model parameters are logically determined and the calculation method of these parameters is put forward. Due to the particular third-order harmonic power is chosen as an index of nonlinear magnitude,some quantitative analysis of characteristic of passive intermodulation (PIM)for N-type connectors have been summarized according to a series of experimental investigations. An accelerated test is designed to obtain degradation sample to study the effect of electrical contact surface degradation on passive intermodulation. Finally, by comparing the outcome of experimental tests with the different theoretical results, the developed higher order seriesI-V model is better than traditional models in the prediction performance and the average error percentage can be controlled within 1.02%, as a result of which we can predict the value accurately. At the same time, in the simulation of high order harmonics analysis, each model shows a large difference, but through the method of parameter correction, the higher order harmonic prediction can be analyzedby the developednonlinear mathematical model.

Key words： Current-voltage model passive intermodulation (PIM) third-order harmonics accelerated test electrical contact

Received: 11 July 2016 Published: 22 December 2017

PACS:

TM503+.5

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	JinQiuyan
	GaoJinchun
	Xie Gang
	Wang Chen
	Jia Jun

Cite this article:

JinQiuyan,GaoJinchun,Xie Gang等. The Passive Intermodulation Characteristic Modeling and Experimental Investigation of N-Type Connectors[J]. Transactions of China Electrotechnical Society, 2017, 32(23): 227-234.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.161074 OR https://dgjsxb.ces-transaction.com/EN/Y2017/V32/I23/227

[1] 蔡晓涛,于德江,王慧峰,等.一种配接N型射频连接器的电缆组件设计[J]. 宇航计测技术, 2013, 33(5): 23-26.
CaiXiaotao, Yu Dejiang, Wang Huifeng, et al. A cable assembly design for N type RF connector [J]. Aerospace Measurement Technology, 2013, 33(5): 23-26.
[2] Zhang Shiquan, Zeng Jun, Jiang Kexia, et al. The third order passive intermodulation analysis of cable connector in mobile communication systems[C]//Proceedings of the 9th International Symposium on Antennas, Propagation and EM Theory, Guangzhou, China, 2010: 497-498.
[3] 胡怡, 魏文赋, 雷栋, 等. 弓网电弧等离子体光谱特性实验[J]. 电工技术学报, 2016, 31(24): 62-70.
Hu Yi, Wei Wenfu, Lei Dong, et al. Experimental investigation on spectral characteristics of pantograph-catenary arc plasma[J]. Transactions of China Electrotechnical Society, 2016, 31(24): 62-70.
[4] 陈忠华, 唐博, 时光,等. 弓网多目标滑动电接触下最优压力载荷[J]. 电工技术学报, 2015, 30(17): 154-160.
Chen Zhonghua, Tang Bo, Shi Guang,et al. Optimal pressure load under multi-objective sliding electric contact in the pantograph-catenary system[J]. Transactionsof China Electrotechnical Society, 2015, 30(17): 154-160.
[5] 金秋延, 高锦春, 谢刚, 等. 通信连接器非线性效应研究[C]//第五届电工产品可靠性与电接触国际会议, 温州, 2014: 188-192. JinQiuyan, Gao jinchun, Xie Gang, et al. A study of the nonlinear effect of electrical connectors[C]//Proceedings of the 5th International Conference on Reliability of Electrical Products and Electrical Contacts, Wenzhou, China, 2014: 190-194.
[6] 邓二平, 赵志斌, 张朋, 等. 压接型IGBT器件内部压力分布[J]. 电工技术学报, 2017, 32(6): 201-208.
Deng Erping, Zhao Zhibin, Zhang Peng, et al. Clamping force distribution within press pack IGBTs[J]. Transactions of China Electrotechnical Society, 2017, 32(6): 201-208.
[7] Timsit R S. High speed electronic connectors: a review of electrical contact properties[J]. IEICE Transactions on Electron, 2005, 88(8): 1532-1545.
[8] Malucci R D. High frequency considerations for multi-point contact interfaces[C]//Proceedings of the Forty-Seventh IEEE Holm Conference on Electrical Contacts, Montreal, Quebec, Canada, 2001: 175-185.
[9] 张青山, 段建东, 叶兵, 等. 基于电接触元件暂态热路建模的接触电阻测量研究[J]. 电力系统保护与控制, 2014, 42(15): 27-33.
Zhang Qingshan, DuanJiandong, Ye Bing, et al. Research on contact resistance measurement based on transient thermal circuit modeling of electric contact elements[J]. Power System Protection and Control, 2014, 42(15): 27-33.
[10] 马东娟, 李玲玲. 接触电阻时间序列的混沌特性识别与预测研究[J]. 电力系统保护与控制, 2015, 43(10): 57-61.
Ma Dongjuan, Li Lingling. Study on identification and prediction of chaotic characteristics of contact resistance time series[J]. Power System Protection and Control, 2015, 43(10): 57-61.
[11] 周蠡, 鲁铁成, 张博, 等. 基于三维分形接触电阻模型的粗糙表面多物理场耦合分析[J]. 电工技术学报, 2015, 30(14): 226-233.
Zhou Li, Lu Tiecheng, Zhang Bo, et al. Based on 3D fractal contact resistance model of rough surface multi physical field coupling analysis[J]. Transactions of China Electrotechnical Society, 2015, 30(14): 226-233.
[12] 周怡琳, 王鹏, 葛世超, 等. 长期贮存航天电连接器尘土污染的研究[J]. 电工技术学报, 2014, 29(7): 269-276.
Zhou Yilin, Wang Peng, Ge Shichao, et al. Research on dust pollution in the long-term storage space electrical connector[J].Transactions of China Electrotechnical Society, 2014, 29(7): 269-276.
[13] 贝太周, 王萍, 蔡蒙蒙. 注入三次谐波扰动的分布式光伏并网逆变器孤岛检测技术[J]. 电工技术学报, 2015, 30(7): 44-51.
Bei Taizhou, Wang Ping, CaiMengmeng. An islanding detection method with the third harmonic injection for distributed grid-connected PV inverters[J]. Transactions of China Electrotechnical Society,2015, 30(7): 44-51.
[14] 代双寅, 杨君超, 李琼林. 基于谐波功率分解的奖惩性电能计量方法[J]. 电力系统保护与控制, 2016, 44(1): 111-116.
Dai Shuangyin, Yang Junchao, Li Qionglin. Based on power harmonic decomposition of rewards and punishment power can measurement method[J]. Power System Protection and Control, 2016, 44(1): 111-116.
[15] 吴超凡, 陈隆道. 基于分段插值同步化算法的谐波测量[J]. 电力系统保护与控制, 2016, 44(9): 1-6.
Wu Chaofan, Chen Longdao. Harmonic measurement power system protection and control based on piecewise interpolation synchronization algorithm[J]. Power System Protection and Control, 2016, 44(9): 1-6.
[16] Ye Ming, He Yongning, Zhu Hui. Empirical equation for carrier power dependence of passive intermodulation product[C]//IEEE International Wireless Symposium (IWS), Shenzhen, China, 2015: 1-4.
[17] Vicente C, Hartnagel H L. Passive-intermodulation analysis between rough rectangular waveguide flanges[J]. IEEE Transactions on Microwave Theory and Techniques,2005, 53(8): 2515-2525.
[18] Vicente C, Wolk D, Hartnagel H L, et al. Experimental analysis of passive intermodulation at waveguide flange bolted connections[J]. IEEE Transactions on Microwave Theory and Techniques, 2007, 55(5): 1018-1028.
[19] Christianson A J, Henrie J J, Chappell W J. Higher order intermodulation product measurement of passive components[J]. IEEE Transactions on Microwave Theory and Techniques, 2008, 56(7): 1729-1736.
[20] Henrie J, Christianson A, Chappell W J. Linear-nonlinear interaction’s effect on the power dependence of nonlinear distortion products[J]. Applied Physics Letters, 2009, 94(11): 269-282.
[21] Kwiatkowski R, Vladimirescu M, Engel K. Tunnel conduction consequences in high frequency microcontacts; passive intermodulation effect[C]// Proceedings of the 50th IEEE Holm Conference on Electrical Contacts and the 22nd International Conference on Electrical Contacts, Seattle, WA, USA, 2004: 152-159.