用于电磁声发射的脉冲激励源设计

doi:10.19595/j.cnki.1000-6753.tces.170205

Abstract
Figure/Table
References
Related Citation (3)

Download: PDF (1000 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Electromagnetic loads of metal structures will produce stress wave signal at the crack, this phenomenon can be used to non-destructive testing of metal defects,which is electromagnetic acoustic emission. Pulse excitation as the core of electromagnetic loading, the frequency and amplitude of its output current have significant effects on loading effect. In order to meet the requirements of impulse excitation for electromagnetic loading experiment, an adjustable regulated power supply based on half bridge switching circuit principle and a charge and discharge circuit with capacitor as energy storage were designed. Pulse current with adjustable frequency and amplitude was produced by controlling charge and discharge process of capacitor through MCU system. The result of the electromagnetic loading experiment shows that the excitation source meets design requirements.

Key words： Electromagnetic load pulse excitation source adjustable voltage source charge and discharge circuit

Received: 05 February 2017 Published: 14 September 2017

PACS:

TM833

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhang Chuang
	Li Chengfeng
	Liu Suzhen
	Xiao Yang
	Yang Qingxin

Cite this article:

Zhang Chuang,Li Chengfeng,Liu Suzhen等. Design of Pulse Excitation Source for Electromagnetic Acoustic Emission[J]. Transactions of China Electrotechnical Society, 2017, 32(增刊1): 203-208.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.170205 OR https://dgjsxb.ces-transaction.com/EN/Y2017/V32/I增刊1/203

[1] Hellier Charles J. 无损检测与评价手册[M]. 戴光, 徐彦廷, 等译. 北京: 中国石化出版社, 2006.
[2] 张闯, 刘素贞, 金亮, 等. 基于大电流直接加载的电磁声发射试验[J]. 电工技术学报, 2013, 28(1): 101-105. Zhang Chuang, Liu Suzhen, Jin Liang, et al. Experimental study of electromagnetically induced acoustic emission based on high current loading directly[J]. Transactions of China Electrotechnical Society, 2013, 28(1): 101-105.
[3] 张闯, 刘素贞, 杨庆新, 等. 基于FFT和小波包变换的电磁声发射信号处理[J]. 电工技术学报, 2010, 25(4): 24-28. Zhang Chuang, Liu Suzhen, Yang Qingxin, et al. Signal processing of electromagnetically induced acoustic emission based on FFT and wavelet packet transform[J]. Transactions of China Electrotechnical Society, 2010, 25(4): 24-28.
[4] Jin Liang, Yang Qingxin, Liu Suzhen, et al. Electromagnetic stimulation of the acoustic emission for fatigue crack detection of the sheet Metal[J]. IEEE Transactions on Applied Superconductivity, 2010, 20(3): 1848-1851.
[5] 刘素珍, 庄东超, 商士博, 等. 高频涡流加载下闭合裂纹的动态响应特性[J]. 电工技术学报, 2015, 30(18): 246-253. Liu Suzhen, Zhuang Dongchao, Shang Shibo, et al. Dynamic response characteristics of closed crack with the high frequency eddy current loading[J]. Transactions of China Electrotechnical Society, 2015, 30(18): 246-253.
[6] 张闯, 李福彪, 刘素贞, 等. 电磁加载对超声传播特性的影响[J]. 电工技术学报, 2017, 32(2): 102- 107. Zhang Chuang, Li Fubiao, Liu Suzhen, et al. Impacts of the electromagnetic loading on the propagation of the ultrasonic wave[J]. Transactions of China Electrotechnical Society, 2017, 32(2): 102-107.
[7] 王卓, 陈鹏. 超声的电磁脉冲激发方式的探讨[J]. 声学技术, 2008, 27(4): 529-532. Wang Zhuo, Chen Peng. Discussion on excitation of ultrasound by electromagnetic pulse[J]. Technical Acoustics, 2008, 27(4): 529-532.
[8] 高松巍, 李冰, 邢燕好, 等. 一种基于DDS技术的电磁超声激励电源[J]. 现代电子技术, 2009, 32(13): 5-7. Gao Songwei, Li Bing, Xing Yanhao, et al. Exciting source for electric magnetic acoustic transducer based on DDS technology[J]. Modern Electronics Technique, 2009, 32(13): 5-7.
[9] Di Capua G, Nicoal Femia. A versatile method for MOSFET commutation analysis in switching power converter design[J]. IEEE Transactions on Power Electronics, 2014, 29(2): 920-935.
[10] Sun Lumei, Zhu Jianjun, Yu Jun, et al. The research of TL494 pulse-width modulation integrated circuit [C]//The 7th International Symposium on Test and Measurement (ISTM/2007), 2007: 1-3.
[11] Emrani A, Adib E, Farzanehfard H, et al. Single- switch soft-switched isolated DC-DC converter[J]. IEEE Transactions on Power Electronics, 2012, 27(4): 1952-1957.
[12] Jafar J J, Fernandes B G. A new quasi-resonant DC- link PWM inverter using single switch for soft switching[J]. IEEE Transactions on Power Electronics, 2002, 17(6): 1010-1016.
[13] 赵龙. 基于STC89C52的瓦斯检测及红外控制系统[J]. 煤炭技术, 2012, 31(5): 25-27. Zhao Long. Detection of methane and infrared control of system on STC89C52[J]. Coal Technology, 2012, 31(5): 25-27.
[14] Bai Zhan, Yan Yang, Guo Yiheng, et al. Design of sinusoidal signal generator based on DDS technology [C]//2012 International Conference on Electric Technology and Civil Engineering, 2012, 2: 1475- 1478.
[15] John Day. Switching power supply chips cut energy drain[J]. Power Engineering: The Magazine of Power Generation, 2004, 30(5): 52-53.
[16] 胡志强, 王改云, 王远. 多路单端反激式开关电源设计[J]. 现代电子技术, 2013(14): 162-165, 170. Hu Zhiqiang, Wang Gaiyun, Wang Yuan. Design of multi-channel switching power supply with single- ended flyback[J]. Modern Electronics Technique, 2013(14): 162-165, 170.
[17] 张巧杰, 熊鸣, 祁鲲. 两路单端电流反激式开关电源设计[J]. 北京信息科技大学学报（自然科学版）, 2011, 26(4): 35-39. Zhang Qiaojie, Xiong Ming, Qi Kun. Two-channel single-chip flyback switching power supply design[J]. Journal of Beijing Information Science and Technology University, 2011, 26(4): 35-39.
[18] 张闯, 蒋盼, 刘素珍, 等. 电磁声发射信号的压缩与重构处理[J]. 电工技术学报, 2017, 32(9): 121-128. Zhang Chuang, Jiang Pan, Liu Suzhen, et al. Compression and reconstruction processing of the electromagnetically induced acoustic emission signal [J]. Transactions of China Electrotechnical Society, 2017, 32(9): 121-128.