低噪声屏蔽电机定子屏蔽套激振力和受迫振动分析

doi:10.19595/j.cnki.1000-6753.tces.L70614

Abstract
Figure/Table
References
Related Citation (4)

Download: PDF (2442 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The three phase canned motor is the exclusive special motor for nuclear reactor coolant pump and its performance determines the vibration and noise of the system. The rotation magnetic field in the airgap would induce the stator can eddy current which not only produces the eddy loss but also mutually effect on the airgap magnetic field and produces the high frequency electromagnetic exciting force(EEF). The stator can is the thin-walled parts, there is mounting clearance between the stator can and the stator tooth face. So the stator can would produce the electromagnetic vibration and noise under the electromagnetic exciting force. At first the mathematic expressions of radial and tangential electromagnetic exciting force on the stator can were derived by using mathematical analysis method. Then, finite element method was applied to calculate the flux density time harmonics, the peripheral direction space harmonics distribution regulation, the harmonics content in the typical positions and the eddy current density distributin of multiple materials were received. In this paper, the variable curves of the electromagnetic force and magnetic field force act on stator can with the hastelloy materials was calculated, which has been compared with the mathematic expressions caculated result and the accuracy of the mathematic expressions was verified. Finally, compared the mode constrained to the mechanical deformation under the electromagnetic exciting force, which provides the theoretical foundation to the following research of vibration and noise reduction of canned motor.

Key words： Canned motor pump canned motor eddy current density electromagnetic exciting force

Received: 20 August 2016 Published: 14 September 2017

PACS:

TM341

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Yu Yali
	Zhang Guosheng
	Wu Di

Cite this article:

Yu Yali,Zhang Guosheng,Wu Di. The Exciting Force and Forced Vibration Analysis of the Stator Can for Low Noise Canned Motor[J]. Transactions of China Electrotechnical Society, 2017, 32(增刊1): 160-168.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.L70614 OR https://dgjsxb.ces-transaction.com/EN/Y2017/V32/I增刊1/160

[1] 张晓晨,李伟力,曹君慈. 屏蔽电机屏蔽损耗与电机性能的计算与分析[J].哈尔滨工业大学学报, 2007, 39(9): 1422-1426. Zhang Xiaochen, Li Weili, Cao Junci. Calculation and ana lysis for the can loss and perform ance of canned motors[J]. Journal of Harbin Institute of Technology, 2007, 39(9): 1422-1426.
[2] 倪有源,黄亚,赵亮. 新型结构永磁屏蔽电机三维磁场分析和电感计算[J]. 电工技术学报,2015, 30(1): 98-104. Ni Youyuan, Huang Ya, Zhao Liang. Analysis of 3-dimensional field and calculation of inductance for a new structure of a permanent magnet canned motor[J]. Transactions of China Electrotechnical Society, 2015, 30(1): 98-104.
[3] Eggers D, Steentjes S, Hameyer K. Advanced iron- loss estimation for nonlinear material behavior[J]. IEEE Transactions on Magnetics, 2012, 48(11): 3021- 3024.
[4] Gmyrek Z, Boglietti A, Cavagnino A. Estimation of iron losses in induction motors: calculation method, results, and analysis[J]. IEEE Transactions on Industrial Electronics, 2010, 57(1): 161-171.
[5] 刘志珍,朱常青,励庆孚. 计算导体涡流分布的FEM_IEM混合数学模型[J].电工技术学报, 2001, 16(6): 46-49. Liu Zhizhen, Zhu Changqing, Li Qingfu. A hybrid FEM-IEM mathematical model for calculation of eddy current distribution in conductor[J]. Transactions of China Electrotechnical Society, 2001, 16(6): 46-49.
[6] Ergene L T, Salon S J. Determining the equivalent circuit parameters of canned solid-rotor induction motors[J]. IEEE Transactions on Magnetics, 2005, 41(7): 2281-2286.
[7] Burkhardt Y, Huth G, Urschel S. Eddy current losses in PM canned motors[C]//2010 XIX International Conference on Electrical Machines (ICEM), Rome, Italy, 2010: 1-7.
[8] 梁艳萍,于鸿浩,边旭. 汽轮发电机三相突然短路故障转子动态电磁力计算. [J]. 电工技术学报,2016, 31(6): 91-96. Liang Yanping, Yu Honghao, Bian Xu. Calculation of dynamic electromagnetic force in the rotor of turbogenerator after three-phase sudden short circuit fault[J]. Transactions of China Electrotechnical Society, 2016, 31(6): 91-96.
[9] 谢世强,杨嘉祥. 屏蔽电机定子屏蔽套损耗的计算与分析[J]. 防爆电机杂志,2010, 45(3): 41-45. Xie Shiqing, Yang Jiaxiang. Calculation and analysis on stator can losses of canned motor[J]. Explosion- Proof Eletric Machine, 2010, 45(3): 41-45.
[10] 杨浩东,陈阳生,邓志奇. 永磁同步电机常用齿槽配合的电磁振动[J]. 电工技术学报,2011, 26(9): 24-30. Yang Haodong, Chen Yangsheng, Deng Zhiqi. Electromagnetic vibration of PM synchronous motors with different combinations of slot and pole number [J]. Transactions of China Electrotechnical Society, 2011, 26(9): 24-30.
[11] 黄学良,张前,周赣. 一种无铁Halbach型永磁直线电机[J]. 电工技术学报, 2010, 25(6): 1-6. Huang Xueliang, Zhang Qian, Zhou Gan. Halbach permanent magnet ironless linear motors[J]. Transac- tions of China Electrotechnical Society, 2010, 25(6): 1-6.
[12] 鲍晓华,方勇,程晓巍,等. 大型充水式潜水电机定子端部绕组电磁振动研究[J].电工技术学报,2013, 28(11): 138-146. Bao Xiaohua, Fang Yong, Cheng Xiaowei, et al. Research on electromagnetic vibration of stator end winding of large water filling submersible motor[J]. Transactions of China Electrotechnical Society, 2013, 28(11): 138-146.
[13] 冯颖慧, 张继革, 王德忠. 屏蔽电机屏蔽套电磁力仿真分析[J]. 机械设计与制造,2012(4): 26-28. Feng Yinghui, Zhang Jige, Wang dezhong. Simulation and analysis of electromagnetic force on shield of canned motor[J]. Machinery Design & Manufacture, 2012(4): 26-28.
[14] 胡月. 屏蔽电机主泵定子屏蔽套屈曲稳定性研究[D]. 上海: 上海交通大学,2013.
[15] Li Rui , Jia Qifen, Zhong Shun. Vibration and modal analysis of induction motor[J]. Applied Mechanics and Materials, 2012, 226-228: 92-97.
[16] 赵洋, 严波, 曾冲, 等. 大型汽轮发电机定子端部电磁力作用动态响应分析[J]. 电工技术学报, 2016, 31(3): 199-206. Zhao Yang, Yan Bo, Zeng Chong, et al. Dynamic response analysis of large turbogenerator stator end structure under electromagnetic forces[J]. Transactions of China Electrotechnical Society, 2016, 31(3): 199-206.
[17] Rosca I C, Filip M, Helerea E. Three-phase squirrel- cage induction motor modal analyses. Theoretical and experimental aspects[C]//13th International Conference on Optimization of Electrical and Electronic Equipment, Brasov, Romania, 2012: 606-611.