输入串联输出并联逆变器的集中式均压控制策略

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (884 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Input-series output-parallel(ISOP) inverter which consists of low power modules connected in series at input and in parallel at the output, is suitable for the high input voltage and high power conditions. This paper proposes a centralized voltage sharing control strategy to obtain input voltage sharing and output current sharing. In the strategy, input voltage sharing regulator and output voltage regulator are integrated together, and provides control signals are provided to modules. Each module has its own current regulator and main circuit. Input voltage control loop makes high input voltage module with high output current, and low input voltage module with low output current, until input voltage sharing is achieved. When input voltages of modules are equal, all the modules have same reference of current loop, output current sharing is also achieved. This paper analyzes the control strategy, and proposes the design method of the control system by the decoupling theory. Finally, some experimental results are given to verify it.

Key words： Centralized input-series output-parallel inverter input voltage sharing

Received: 24 October 2007 Published: 13 February 2014

PACS:

TM464

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhuang Kai
	Ruan Xinbo

Cite this article:

Zhuang Kai,Ruan Xinbo. Centralized Voltage Sharing Control Strategy for Input-Series Output-Parallel Inverter[J]. Transactions of China Electrotechnical Society, 2009, 24(4): 147-151.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2009/V24/I4/147

[1] 王建冈, 阮新波, 陈军艳. 航空用大功率模块电源的设计及关键技术[J]. 电工技术学报, 2005, 20(12): 95-100.
[2] Giri R, Ayyanar R, Ledezma E. Input-series and output-series connected modular DC-DC converters with active input voltage and output voltage sharing [C].In Proc. IEEE APEC, 2004: 1751-1756.
[3] 王晓寰, 张纯江, 顾和荣, 等. 现场总线控制的单相逆变电源并联系统[J]. 电工技术学报, 2007, 22(10): 109-112.
[4] Brabandere K, Bolsens B, Keybus J, et al. A voltage and frequency droop control method for parallel inverters[J]. IEEE Trans. on Power Electron., 2007, 22(4): 1107-1115.
[5] 肖岚, 李睿. 电压电流双闭环控制逆变器并联系统的建模和环流特性分析[J]. 电工技术学报, 2006, 21(2): 51-56.
[6] Giri R, Ayyanar R, Mohan N. Common duty ratio control of input series connected modular DC-DC converters with active input voltage and load current sharing[C]. In Proc. IEEE APEC, 2003: 322-326.
[7] Ayyanar R, Giri R, Mohan N. Active input-voltage and load-current sharing in input-series and outputparallel connected modular dc-dc converters using dynamic input-voltage reference scheme[J]. IEEE Trans. on Power Electron., 2004, 19(6): 1462- 1472.
[8] Kim J W, You J S, Cho B H. Input series-output parallel connected converter for high voltage power conversion applications employing charge control[C]. In Proc. Intersociety Energy Conversion Engineering Conference, 1999: 2593-2599.
[9] 章涛, 阮新波. 输入串联输出并联全桥变换器均压均流的一种方法[J]. 中国电机工程学报, 2005, 25(24): 47-50.
[10] 马学军, 牛金红, 康勇. 输入串联输出并联的双全桥变换器输入电容均压问题的研究[J]. 中国电机工程学报, 2006, 26(16): 86-91.
[11] 程璐璐, 阮新波, 章涛．输入串联输出并联的直流变换器控制策略研究[J].中国电机工程学报, 2006, 26(22): 67-73.
[12] Wu H, Lin D, Zhang D, et al. A current-mode control technique with instantaneous inductor current feedback for UPS inverters[C]. In Proc. IEEE APEC, 1999: 951-957.