基于四线旋转变压器及AD2S1200的叉车线控转向永磁同步电机角度解码研究

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (31028 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The rotor position decoding was studied in this paper for controlling the permanent magnetic synchronous machine (PMSM) of the forklift steer-by-wire system based on the four-line resolver and the chip AD2S1200. Firstly, an amplifying circuit was designed to amplify and filter the sine wave signal of the chip AD2S1200, and this signal was used for the sine excitation signal of resolver. The single-ended output signal of rotary transformer is a sine and cosine signal with angle information. Then, this signal was processed into a differential-mode input signal needed by the chip AD2S1200 through the conditioning circuit. The angle information processed by interface circuit also was obtained by the DSP chip MC56F8367 of Freescale. And a digital filtering method was applied to process the angle information. Finally, the PMSM rotor position was obtained exactly. The experiment results show that the decoding angle has the characteristics of good accuracy, smooth waveform and excellent real-time performance, and it can meet the demand of PMSM motor control of forklift Steer-by-Wire system.

Key words： Forklift steer-by-wire system permanent magnetic synchronous machine (PMSM) four-line resolver AD2S1200

Received: 15 August 2015 Published: 18 August 2016

PACS:

TM351

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Wang Jianming
	Yuan Chenhu
	Liu Rui
	Li Kai

Cite this article:

Wang Jianming,Yuan Chenhu,Liu Rui等. Research on PMSM Rotor Position Decoding of the Forklift Steer-by-Wire System Based on the Four-Line Resolver and AD2S1200[J]. Transactions of China Electrotechnical Society, 2015, 30(增刊2): 95-100.

URL:

https://dgjsxb.ces-transaction.com/EN/ OR https://dgjsxb.ces-transaction.com/EN/Y2015/V30/I增刊2/95

[1] 徐翔, 宋文斌. 电动叉车的电动助力转向(EPS)应用[J]. 机电工程, 2010, 27(11): 33-34.
Xu Xiang, Song Wenbin. Electric power steering (EPS) application of electric forklift[J]. Journal of Mechnical & Electronical Engineering, 2010, 27(11): 33-34.
[2] 莫会成, 闵琳. 现代高性能永磁交流伺服系统综述—— 传感装置与技术篇[J]. 电工技术学报, 2015, 30(6): 10-21.
Mo Huicheng, Min Lin. Summary of modern high performance permanent magnet AC servo system: sensor device and technology[J]. Transactions of China Electrotechnical Society, 2015, 30(6): 10-21.
[3] Bergas J J, Ferrater S C, Gross G, et al. High- accuracy all-digital resolver-to-digital conversion[J]. IEEE Transactions on Industry Electronics, 2012, 3(1): 326-33.
[4] 文建平, 李红梅, 姚宏洋. 集成故障在线诊断及容错控制的全数字旋转变压器数字转换器[J]. 电工技术学报, 2013, 28 (增2): 445-450.
Wen Jianping, Li Hongmei, Yao Hongyang. All- digital resolver-to-digital converter integrated with online fault diagnosis and fault-tolerant control [J]. Transactions of China Electrotechnical Society, 2013, 28(S2): 445-450.
[5] Analog Devices Inc. AD2S1200 DATA Sheet[Z]. ADI, 2010.
[6] 樊泽明, 郭月, 袁朝辉. 基于AD698的旋转变压器驱动及解码电路设计[J]. 测控技术, 2013, 32(2): 110-117.
Fan Zeming, Guo Yue, Yuan Chaohui. Driving and decoding circuit design of resolver based on AD698[J]. Measurement and Control Technology, 2013, 32(2): 110-117.
[7] Joan Bergas-Jané, Ferrater-Simón C, Gross G, et al. High-accuracy all-digital resolver-to-digital conver- sion[J]. IEEE Transactions on Industrial Electronics, 2011, 59(1): 326-333.
[8] 罗德荣, 周成, 黄科元, 等. 基于AD2S1200的旋转变压器接口电路设计及信号处理[J]. 电力电子技术, 2008, 42(8): 68-70.
Luo Derong, Zhou Cheng, Huang Keyuan, et al. Interface circuit design of resolver and signal processing based on AD2S1200[J]. Power Electronics, 2008, 42(8): 68-70.
[9] 江战红, 李红梅, 刘应龙. 基于旋转变压器的IPMSM系统转子位置获取[J]. 微电机, 2013, 46(11): 62-66.
Jiang Zhanhong, Li Hongmei, Liu Yinglong. Obtaining rotor position based on resolver of IPMSM system[J]. Micromotors, 2013, 46(11): 62-66.
[10] 朱明. 基于永磁同步电机的电动助力转向控制器设计[D]. 天津: 天津工业大学, 2012.