永磁同步电机调速系统的滑模控制

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (686 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The permanent magnet synchronous motor (PMSM) is a widely used typical nonlinear multi-variable coupled system. It is sensitive to the load disturbance and the change of interior parameter. Traditional PI controller is widely used in the speed control of PMSM for its simplicity, but it can't meet the need of high performance. We should give the range of the coefficient when confirm the controller in sliding model control(SMC). Based on the problem this paper proposes a variable SMC for PMSM speed control system combined with reaching law control, and give the process of controller’s design. Simulation and experiment research are done on the speed control system respectively. The results demonstrate that the system has the advantages of fastness rapid response, stability, robustness, no over-shoot and rejecting load disturbance.

Key words： Permanent magnet synchronous motor(PMSM) sliding model control(SMC) exponential reaching law adjustable speed

Received: 28 March 2008 Published: 17 February 2014

PACS:

TM351

Corresponding Authors: Nanjing University of Aeronautics and Astronautics Nanjing 210016 China

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Wang Haibo
	Zhou Bo
	Fang Sichen

Cite this article:

Wang Haibo,Zhou Bo,Fang Sichen. A PMSM Sliding Mode Control System Based on Exponential Reaching Law[J]. Transactions of China Electrotechnical Society, 2009, 24(9): 71-77.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2009/V24/I9/71

[1] 孙强, 程明, 周鹗, 等. 新型双凸极永磁同步电机调速系统的变参数PI控制[J]. 中国电机工程学报, 2003, 23(6): 117-123.
[2] Lai C K, Kuo Kai Shyu. A novel motor drive design for incremental motion system via sliding-mode control method[J]. IEEE Trans. on Industrial Electronics, 2005, 52(2):499-507.
[3] 李鸿儒, 顾树生. 基于神经网络的PMSM 速度和位置自适应观测器的设计[J]. 中国电机工程学报, 2002, 22(12):31-35.
[4] Won Seok Oh, Young Tae Kim, Changsun Kim, et al. Speed control of induction motor using genetic algorithm based fuzzy controller [C]．IEEE Industrial Electronics Society Conference, 1999:625-627.
[5] 张希, 陈宗祥, 潘俊民, 等. 永磁直线同步电机的固定边界层滑模控制[J]. 中国电机工程学报, 2006, 26(22):115-121.
[6] 田艳丰, 郭庆鼎. 永磁直线同步电动机的滑模H_∞鲁棒跟踪控制[J]. 电工技术学报, 2004, 19(4):2-5.
[7] Zhang Bin, Li Yaohua. A PMSM sliding mode control system based on model reference adaptive control[C]. Digital Object Identifier 10.1109/IPEMC.2000 vol.1:336-341.
[8] Lin F J, Chiu S L. Robust PM synchronous motor servo drive with variable-structure-model output following control[J]. IEE Proceedings on Electric Power Applications, 1997, 144(5):317-324.
[9] 贾洪平, 贺益康. 永磁同步电机滑模变结构直接转矩控制[J]. 电工技术学报, 2006, 21(1):1-6.
[10] 张昌凡, 王耀南, 何静. 永磁同步伺服电机的变结构智能控制[J]. 中国电机工程学报, 2002, 22(7):13-17.
[11] 姚琼荟, 黄继起, 吴汉松. 变结构控制系统[M]. 重庆: 重庆大学出版社, 1997.
[12] 高为炳. 变结构控制理论基础[M]. 北京:中国科学技术出版社, 1990.
[13] Ge Baoming, Zhao Nan. DSP-based discrete-time reaching law control of switched reluctance motor[C]. Power Electronics and Motion Control Conference, 2006:1-5.
[14] Vitthal Bandal, Bandyopadhyay B, Kulkarni A M. Design of power system stabilizer using power rate reaching law based sliding mode control technique[C]. The 7th International Power Engineering Conference, IPEC 2005, 2005:923-928.
[15] Ding Kun. Active power factor correction using sliding mode control with reaching law[C]. Second IEEE Conference on Industrial Electronics and Applications, 2007:1165-1167.
[16] 葛宝明, 郑琼林, 蒋静坪, 等. 基于离散时间趋近率控制与内模控制的永磁同步电动机传动系统[J]. 中国电机工程学报, 2004, 24(11):106-111.