电容储能型脉冲电源分时分段触发策略自动计算方法

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (2150 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Based on Matlab platform, a fast solving method for the launch process of the electromagnetic railgun is proposed. By using this method, an automatic calculation method for the triggering strategy of the capacitive pulsed-power supply is then proposed, which possesses the advantages of both accuracy and applicability. The circuit model of the electromagnetic railgun system is firstly analyzed and the mathematical expressions of the relevant electrical and mechanical quantities are also given. Then the time discretization idea, the circuit decoupling idea and the specific implementation of the fast solving method are elaborated in detail. And the basic principle and the specific implementation of the automatic calculation method are also discussed. Finally, a typically representative system with 4 MJ initial energy is given. The feasibility and accuracy of these two methods are proven through the comparison with the Simplorer simulation results which are confirmed to be compliant with the real system. Results show that the rail current waveform is approximate to a flat wave under the action of the triggering strategy acquired from the automatic calculation method, and the relative error of the armature launch velocity between the Simplorer simulation result and the Matlab calculation result is within 3%. These results confirm the feasibility and accuracy of the above methods.

Key words： Triggering strategy launch process capacitive energy-storage electromagnetic railgun

Received: 20 April 2015 Published: 12 July 2016

PACS:

TM133

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors

Cite this article:

URL:

https://dgjsxb.ces-transaction.com/EN/ OR https://dgjsxb.ces-transaction.com/EN/Y2016/V31/I11/186

[1] 理查德·埃斯特里·马歇尔,王莹.电磁轨道炮的科学与技术[M].北京:兵器工业出版社,2006.
[2] 陈庆国,王永红,魏新劳,等.电容驱动型轨道电磁炮电磁过程的计算机仿真[J].电工技术学报,2006,21(4):68-71.
Chen Qingguo,Wang Yonghong,Wei Xinlao,et al.Computer simulation of electromagnetic process in the capacitor drived rail gun[J].Transactions of China Electrotechnical Society,2006,21(4):68-71.
[3] Fair H D.Electromagnetic launch science and technology in the United States enters a new era[J].IEEE Transactions on Magnetics,2005,41(1):158-164.
[4] Thornhill L D,Batteh J H,Littrell D M.Scaling study for the performance of railgun armatures[J].IEEE Transactions on Plasma Science,1989,17(3):409-421.
[5] 李军,严萍,袁伟群.电磁轨道炮发射技术的发展与现状[J].高电压技术,2014,40(4):1052-1064.
Li Jun,Yan Ping,Yuan Weiqun.Electromagnetic gun technology and its development[J].High Voltage Engineering,2014,40(4):1052-1064.
[6] 马山刚,于歆杰,李臻.用于电磁发射的电感储能型脉冲电源的研究现状综述[J].电工技术学报,2015,30(24):222-228,236.
Ma Shangang,Yu Xinjie,Li Zhen.A review of the current research situation of inductive pulsed-power supplies for electromagnetic launch[J].Transactions of China Electrotechnical Society,2015,30(24):222-228,236.
[7] 龚晨,于歆杰,刘秀成.电容储能型轨道炮连续发射系统设计与仿真[J].电工技术学报,2013,28(增2):111-115,121.
Gong Chen,Yu Xinjie,Liu Xiucheng.Continuous emission scheme and its simulation for capacitor-based railgun system[J].Transactions of China Electrotechnical Society,2013,28(S2):111-115,121.
[8] 李化,章妙,林福昌,等.金属化膜电容器自愈理论及规律研究[J].电工技术学报,2012,27(9):218-223,230.
Li Hua,Zhang Miao,Lin Fuchang,et al.Study on theory and influence factors of self-healing in metallized film capacitors[J].Transactions of China Electrotechnical Society,2012,27(9):218-223,230.
[9] Gong Chen,Yu Xinjie,Liu Xiucheng.Study on the system efficiency of the capacitive pulsed-power supply[J].IEEE Transactions on Plasma Science,2015,43(5):1441-1447.
[10]范昭楠,于歆杰.基于过程集成的电磁轨道炮脉冲电源多目标优化[J].电工技术学报,2010,25(5):20-24.
Fan Zhaonan,Yu Xinjie.Process-integration based multi-objective optimization for pulsed power supply of electromagnetic guns[J].Transactions of China Electrotechnical Society,2010,25(5):20-24.
[11]McFarland J,McNab I R.A long-range naval railgun[J].IEEE Transactions on Magnetics,2003,39(1):289-294.
[12]Fair H D.Electric launch science and technology in the United States[J].IEEE Transactions on Magnetics,2003,39(1):11-17.
[13]Deadrick J F,Hawke S R,Scudder D J.MAGRAC-a railgun simulation program[J].IEEE Transactions on Magnetics,1982,18(1):94-104.
[14]Yu Xinjie,Fan Zhaonan.Simulation and two-objective optimization of the electromagnetic-railgun model considering VSEC resistance and contact resistance[J].IEEE Transactions on Plasma Science,2011,39(1):405-410.
[15]Hsieh K T,Satapathy S,Hsieh M T.Effects of pressure-dependent contact resistivity on contact interfacial conditions[J].IEEE Transactions on Magnetics,2009,45(1):313-318.
[16]Engel T G,Neri J M,Veracka M J.Characterization of the velocity skin effect in the surface layer of a railgun sliding contact[J].IEEE Transactions on Magnetics,2008,44(7):1837-1844.
[17]史正军.高功率脉冲电源的仿真与优化设计[D].北京:清华大学,2008.
[18]范昭楠.电磁轨道炮仿真系统的验证与双目标优化[D].北京:清华大学,2010.
[19]龚晨.电容储能型电磁轨道炮系统效率的研究[D].北京:清华大学,2014.