电动汽车用高功率密度电机关键技术

Abstract
Figure/Table
References
Related Citation (9)

[1] 任钦. 高功率密度永磁电机磁场与温度场计算[D]. 哈尔滨: 哈尔滨工业大学, 2009.
[2] 王凤翔. 高速电机的设计特点及相关技术研究[J]. 沈阳工业大学学报, 2006, 28(3): 258-264. Wang Fengxiang. Study on design feature and related technology of high speed electrical machines[J]. Journal of Shenyang University of Technology, 2006, 28(3): 258-264.
[3] Jeong Jong Lee, Young Kyoun Kim, Hyuk Nam, et al. Loss distribution of three-phase induction motor fed by pulse width-modulate inverter[J]. IEEE Transactions on Magnetics, 2004, 40(2): 762-765.
[4] 彭道强. 变频调速异步电动机的设计[J]. 上海大中型电机, 2009(4): 8-9. Peng Daoqiang. Design on variable frequency asynch- ronous motor[J]. Shanghai Medium and Large Electrical Machines, 2009(4): 8-9.
[5] 丁鸿昌, 肖林京, 张华宇, 等. 高速永磁电机转子护套过盈配合量计算及应力分析[J]. 机械设计与研究, 2011, 27(5): 95-98. Ding Hongchang, Xiao Linjing, Zhang Huayu, et al. Interference fit calculation and stress analysis for rotor sleeve of high-speed permanent magnet electric machine[J]. Machine Design and Research, 2011, 27(5): 95-98.
[6] 王继强, 王凤翔, 鲍文博, 等. 高速永磁电机转子设计与强度分析[J]. 中国电机工程学报, 2005, 25(15): 140-145. Wang Jiqiang, Wang Fengxiang, Bao Wenbo, et al. Rotor design and strength analysis of high speed permanent magnet machine[J]. Proceedings of the CSEE, 2005, 25(15): 140-145.
[7] Kirtley J L, Cowie J, Brush J G, et al. Improving induction motor efficiency with die-cast copper rotor cages[C]. Power Engineering Society General Meeting, Tampa: 2007.
[8] 黄坚, 杨旭, 冯俊峰, 等. 铸铜转子超高效率电动机的研制[J]. 电机技术, 2012(5): 2-5. Huang Jian, Yang Xu, Feng Junfeng, et al. Research and manufacture of the premium efficiency motor with the cast copper rotor[J]. Electrical Machinery Technology, 2012(5): 2-5.
[9] 王直久. 无纬带在电机制造中的应用[J]. 机械设计与制造, 1982(5): 52-54. Wang Zhijiu. Non-latitude belt in the application of the motor manufacturing[J]. Machinery Design and Manufacture, 1982(5): 52-54.
[10] 杨青. 电机绕线转子铁心表面无纬带的绑扎[J]. 电机与控制应用, 2011, 38(10): 47-50. Yang Qing. Binding of non-latitude belt on rotor surface of wound rotor motor[J]. Electric Machines and Control Application, 2011, 38(10): 47-50.
[11] 周佩荣. 大中型高压绕线转子三相异步电动机端部无纬带的绑扎[J]. 电机与控制应用, 2009, 36(6): 56-57. Zhou Peirong. Colligation of banding tape concerning end of large and medium-sized high voltage wound rotor around three-phase asynchronous motor[J]. Electric Machines and Control Application, 2009, 36(6): 56-57.
[12] 魏永田, 孟大伟, 等. 电机内热交换[M]. 北京: 机械工业出版社, 1998.
[13] 李春艳, 褚佳明. 直线感应电动机定子线圈端部灌封树脂工艺[J]. 防爆电机, 2005, 40(6): 44-45. Li Chunyan, Chu Jiaming. The application of the process of encapsulating resin to the stator coil ends of linear induction motor[J]. Explosion-Proof Electric Machine, 2005, 40(6): 44-45.
[14] 王刚, 李巧, 詹忙秋, 等. 低脉动无刷电机灌封材料及工艺研究[J]. 微电机, 2013, 46(6): 87-90. Wang Gang, Li Qiao, Zhan Mangqiu, et al. Research on potting material and excellent process of low ripple brushless motor[J]. Micromotors, 2013, 46(6): 87-90.
[15] 姚望. 永磁同步牵引电机热计算和冷却系统计算[D]. 沈阳: 沈阳工业大学, 2013.
[16] 罗勇林. 大型异步电机通风散热优化设计[D]. 上海: 上海交通大学, 2007.
[17] 赵文辉, 王瑞敏. 增安型变频调速三相异步电动机的设计[J]. 电气防爆, 2001(4): 19-21. Zhao Wenhui, Wang Ruimin. Design of the increase- safety variable frequency adjustable-speed three phase induction motor[J]. Electric Explosion Protection, 2001(4): 19-21.
[18] Tong Wenming, Tang Renyun, An Zhongliang, et al. Water cooling system design and thermal analysis for low speed permanent magnet machines[C]. Electrical Machines and Systems(ICEMS, Beijing, China, 2011: 1-4.
[19] Jiang Yong, Yang Zhi, Krishnamurthy M. Optimal design considerations for interior permanent magnet motor for a range-extended electric vehicle[C]. Trans- portation Electrification Conference and Expo(ITEC), Detroit, United State, 2013: 1-6.