电动汽车开关电源电磁兼容优化设计方法

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (737 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract On the basis of serious electromagnetic interference produced by power electronic equipment, parasitic capacitance existing between transistor and heat sink is considered as the main factor disturbing common- mode loop. Calculation model of parasitic capacitance is established by using FEM and electrostatic field principle, and computing method is also derived. Electromagnetic interference improvement method for converter system is proposed by controlling the parasitic capacitance impedance. Experimental results show that changing the permittivity and thickness of the thermal conductive adhesive which are filled between the transistor heat-conducting plate and heat sink to can reduce the conducted interference.

Key words： Electric vehicle converter EMC parasitic parameter modeling EMI improvement

Received: 24 April 2013 Published: 05 November 2014

PACS:	U469.72
	O441.4
	TN713

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Wang Quandi
	An Zongyu
	Zheng Yali
	Peng Hemeng
	Li Xu

Cite this article:

Wang Quandi,An Zongyu,Zheng Yali等. Electromagnetic Compatibility Optimization Design for Switching Power Supply used in Electric Vehicle[J]. Transactions of China Electrotechnical Society, 2014, 29(9): 225-231.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2014/V29/I9/225

[1] Madi A, Young Joo L, Rajashekara K. Power electronics and motor drives in electric, hybrid electric and plug-in hybrid electric vehicles[J]. IEEE Transactions on Industrial Electronic, 2008, 55(6): 2237-2245.
[2] Zhang D B, Chen D Y, Lee F C. An experimental comparison of conducted EMI emissions between a zero-voltage transition circuit and a hard switching circuit[C]. Proceedings of the IEEE Power Electronics Specialists Conference, Virginia, USA, 1996.
[3] Chung H, Hui S Y R, Tse K K. Reduction of power converter EMI emission using soft-switching technique [J]. IEEE Transactions on Electromagnetic Compati- bility, 1998, 40(3): 282-288.
[4] Mahdavi J, et al. Comparison of conducted RFI emission from different unity power factor AC/DC converters[C]. Proceedings of the IEEE Power Electro- nics Specialists Conference, Virginia, USA, 1996.
[5] Trzynadlowski A M, Blaabjerge F. Random pulse width modulation technique for converter-fed drive system—a review[J]. IEEE Transactions on Industry Application, 1994, 30(5): 1166-1174.
[6] Nagesware Rao K, Ramana P V. EMC analysis in PCB designs using an expert system[C]. International Conference on Electromagnetic Interference and Compatibility, Madras, India, 1995.
[7] Wu M W. Development of an interated CAD tool for switchig power supply design with EMC performance evaluation[J]. IEEE Transactions on Industry Applica- tion, 1998, 34(2): 364-373.
[8] Saha P K. Reliable prediction of EMI radiation from a PCB at the design stage of electronic equipment [J]. IEEE Transactions on Electromagnetic Compatibility, 1998, 40(2): 166-173.
[9] 王毅, 李和明, 石新春, 等. 多电平PWM逆变器电路谐波分析与输出滤波器设计[J]. 中国电机工程学报, 2003, 23(10): 78-82. Wang Yi, Li Heming, Shi Xinchun, et al. Harmonic analysis and output filter design for multilevel PWM inverters[J]. Proceedings of the CSEE, 2003, 23(10): 78-82.
[10] 康伟, 张丽霞, 刘春艳. 电流型PWM整流器输出滤波器设计方法[J]. 电工技术学报, 2012, 27(6): 83-89. Kang Wei, Zhang Lixia, Liu Chunyan. Output filter design method in current-source PWM converters[J]. Transactions of China Electrotechnical Society, 2012, 27(6): 83-89.
[11] 杨玉岗, 那欣, 王长华, 等. 基于积木式交错并联的平面全集成EMI滤波器[J]. 电工技术学报, 2012, 27(3): 182-187. Yang Yugang, Na Xin, Wang Changhua, et al. Planar completely integrated EMI filter based on stacked- type interleaved connection[J]. Transactions of China Electrotechnical Society, 2012, 27(3): 182-187.
[12] 陈仲, 陈淼, 罗颖鹏, 等. 一种采用单功率管桥臂的并联型有源滤波器[J]. 中国电机工程学报, 2012, 32(3): 22-29. Chen Zhong, Chen Miao, Luo Yingpeng, et al. A parallel active power filter with single power switch leg[J]. Proceedings of the CSEE, 2012, 32(3): 22-29.
[13] 王世山, 朱叶, 沈湛. 构成平面EMI滤波器元件电磁参数的提取[J]. 中国电机工程学报, 2012, 32(21): 146-152. Wang Shishan, Zhu Ye, Sheng Zhan. Extraction of magnetic parameters for planar EMI filter elements [J]. Proceedings of the CSEE, 2012, 27(21): 146-152.
[14] 陈仲, 朱银玉. 基于交流侧LC滤波的近正弦输入电流三相整流器[J]. 电工技术学报, 2009, 24(11): 108-113. Chen Zhong, Zhu Yinyu. Three-phase rectifier with near-sinusoidal input currents and LC filters connected on the AC side[J]. Transactions of China Electrotech- nical Society, 2009, 24(11): 108-113.
[15] Neugebauer T C, Phinney J W, Perreault D J. Filters and components with inductance cancellation[J]. IEEE Transactions on Industry Applications, 2004, 40(2): 483-491.
[16] Wang S, Lee F C, Odendaal W G. Controlling the parasitic parameters to improve EMI filter performance [C]. Proceedings of IEEE Applied Power Electronics Conference and Exposition, Virginia, 2004.
[17] Wang Shuo, Lee Fred C, Van Wyk J D. Design of inductor winding capacitance cancellation for EMI suppression[C]. Proceedings of the IEEE Power Electronics Specialists Conference, Virginia, 2006.