|
|
|
| Design Theory and Implementation of Planar EMI Filter Based on Annular Integrated Inductor-Capacitor Unit |
| Wang Shishan, Zhu Ye, Shi Leilei |
| Jiangsu Key Laboratory of New Energy Generation and Power Conversion
Nanjing 210016 China |
|
|
|
|
Abstract Planar EMI filter has good application prospect in power electronics system for the advantages of small volume and good high-frequency performance. However, a complete theoretical system for the design of planar EMI filter has not been proposed yet. In this paper, an integrated structure formed by an annular “inductor-capacitor” (LC unit) is proposed firstly, which can be used as the basic cell of the planar EMI filter. A general arc transmission theory is also proposed, based on which the distributed-parameter model of the LC unit is established. Then, this LC unit can be equivalent to the two-port network by employing the model transformation method. Besides, the turn-to-turn electromagnetic parameter is extracted by using finite element method, which provides the foundation for the research of LC unit and its electromagnetic performance of filter. The design method and the implementation of the whole planar EMI filter are elaborated in details, and the empirical initial values of the related structural sizes are also presented in this paper. In order to verify the proposed design theory, several EMI filters formed by LC units are designed according to the specifications. Common mode insertion losses of the EMI filter are calculated and measured, respectively. The results verify the feasibility of design theory.
|
|
Received: 02 November 2011
Published: 27 November 2013
|
|
|
|
|
|
[1] Chen Rengang, Wang Shuo, van Wyk J D, et al. Integration of EMI filter for distribution power system(DPS) front-end converter[C]. Proceedings of the IEEE Power Electronics Specialist Conference, Acapulco Mexico, 2003: 296-300.
[2] Chen Rengang. Integrated EMI filters for switch mode power supplies[D]. Blacksburg, Virginia: Virginia Polytechnic Institute and State University, 2004.
[3] Chen Rengang, Van Wyk J D, Wang Shuo, et al. Improving the characteristics of integrated EMI filter by embedded conductive layers[J]. IEEE Transactions on Power Electronics, 2005, 20(3): 611-619.
[4] Luo Fang, Robutel Remi, Wang Shuo, et al. Integrated input EMI filter for a 2kW DC-fed 3-phase motor drive[C]. Proceedings of the IEEE Applied Power Electronics Conference and Exposition, Washington, USA, 2009: 325-329.
[5] Wu Xiaofeng, Xu Dehong, Wen Zhiwei, et al. Modeling of integrated EMI filter with flexible multi-layer(FML) foils[C]. Proceedings of the IEEE Applied Power Electronics Conference and Exposition. Washington, USA, 2009: 749-755.
[6] 周小林, 王世山, 崔永生. 平面集成滤波器LC单元的阻抗特性[J]. 电工电能新技术, 2010, 29(4): 18-22.
Zhou Xiaolin, Wang Shishan, Cui Yongsheng. impedance characteristics of LC unit for plane integrated filter[J]. Advanced Technology of Electrical Engineering and Energy, 2010, 29(4): 18-22.
[7] 解广润. 电力系统过电压[M]. 武汉: 水力电力出版社, 1985.
[8] 钱照明, 程肇基. 电力电子系统电磁兼容设计基础及干扰抑制技术[M]. 杭州: 浙江大学出版社, 2000.
[9] Wang Shuo, Lee F C, Odendaal W G. Improvement of EMI filter performance with parasitic coupling cancellation[J]. IEEE Transactions on Power Electronics, 2005, 20(1): 1221-1228. |
|
|
|
2013, Vol. 28 
