大功率电机直接起动的逆变器控制模式切换策略

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (565 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract For ensuring reliable operation of high power inverter happening in load shocking (such as short circuit), two kinds of control modes are introduced in this paper. Controlling the output voltage in normal operation constantly is named the voltage control mode (VCM), and controlling the output current constantly in abnormal operation conditions (such as short circuit) is named the current control mode (CCM). The switching model between VCM and CCM becomes one of key technologies. The traditional method is used to switch into CCM, when load current exceedsd the current threshold, and it switches into VCM once the load voltage rises to the rates value after the short circuit eliminating. However, for starting the high-power motor with specific load, it is necessary to set a high current threshold to prevent in CCM because of the high motor starting current. Nevertheless, for the reliable protection of breakdown, such as short circuit, the current threshold is expected to be small. To solve this contradiction, improved method determines the switching condition according to current threshold and voltage threshold. Experimental results validate the proposed control strategy using two 400kV·A parallel inverters.

Key words： LCL filter state feedback pole assignment motor direct starting current threshold voltage threshold voltage control model current control model

Received: 22 January 2010 Published: 20 March 2014

PACS:

TM464

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Li Taofeng
	Wang Hongliang
	Kang Yong
	Pei Xuejun

Cite this article:

Li Taofeng,Wang Hongliang,Kang Yong等. Control Model Switching Strategy for High-Power Motor Direct Starting in Inverter[J]. Transactions of China Electrotechnical Society, 2012, 27(6): 69-76.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2012/V27/I6/69

[1] 周雪松, 向龙瑞, 马幼捷, 等. 故障限流装置的发展和应用[J]. 电工技术学报, 2004, 20(11): 1-7.
[2] 丁辉, 姚蜀军, 韩民晓. 高压变频驱动系统脉冲封锁保护策略[J]. 中国电机工程学报, 2006, 26(6): 123-127.
[3] 王林兵, 何湘宁, 张超. 逆变器输出限流技术研究[J]. 电力电子技术, 2006, 40(4): 65-67.
[4] 孙俊忠, 马伟明, 宋振海. 双绕组交直流发电机直流侧突然短路分析[J]. 中国电机工程学报, 2005, 25(11): 95-100.
[5] 林湘宁, 高艳, 刘沛, 等. 基于零序补偿导纳的小电流接地系统单相故障保护新方法[J]. 中国电机工程学报, 2006, 26(10): 45-49.
[6] Chunlian Jin, Roger Dougal. Current limiting technique based protection strategy for an industrial DC distribution system[J]. IEEE Internetional Symposium on Circuits and Systems 2006(7): 9-12, 820-826.
[7] 汪洪亮, 岳秀梅, 裴雪军, 等. 组合式三相逆变器软硬件限流保护策略[J]. 电工技术学报, 2008, 23(9): 92-97.
[8] 陈坚. 电力电子学-电力电子变换和控制技术[M]. 北京, 高等教育出版社, 2004: 109-110.
[9] Guerrero J M, De Vicuna L G, Matas J, et al. A wireless controller to enhance dynamic performance of parallel inverters in distributed generation systems[J]. IEEE Transactions on Power Electronics, 2004, 19(5): 1205-1213.
[10] 沈国桥, 徐德鸿. LCL滤波并网逆变器的分裂电容法电流控制[J]. 中国电机工程学报, 2008, 28(18): 36-41.
[11] Fei Liu, Yan Zhou, Shanxu Duan, et al. Parameter design of a two-current-loop controller used in a grid-connected inverter system with LCL filter[J]. IEEE Transactions on Industrial Electronics, 2009, 56(11): 4483-4491.
[12] Erika Twining, Holmes D G. Grid current regulation of a three-phase voltage source inverter with an LCL input filter[J]. IEEE Transactions. on Power Electronics, 2003, 18(5): 888-895.
[13] 侯婷, 裴雪军, 刘明先, 等. 大功率组合式三相逆变电源的统一控制技术[J]. 中国电机工程学报, 2006, 26(25): 46-50.
[14] 刘国海, 刘平原, 沈跃, 等. 两电机变频调速系统的神经系统广义逆解耦控制[J]. 中国电机工程学报, 2008, 28(36): 98-102.
[15] 胡长生, 林平, 张仲超 . 变频调速系统集成化中的分时技术[J]. 中国电机工程学报, 2005, 25(5): 79-82.
[16] 辜承林, 陈乔夫, 熊永前. 电机学[M]. 2版. 武汉, 华中科技大学出版社, 2005, 238-247.
[17] 李立, 黄松柏, 王洪亮. 基于电压-电流控制模式的组合式三相逆变器[J]. 电机与控制学报, 2001, 2(15) : 63-70.