集成EMI滤波器原理与设计

Abstract
Figure/Table
References
Related Citation (12)

Download: PDF (1127 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract This paper proposes an integrated structure for EMI filter based on the flexible multi-layer foil (FML foil). The DM windings are designed and all the passive components are integrated in one core. In this paper, the distributed circuit of the filter is given firstly, and then the integrated principle of DM & CM inductance is explained respectively, according to the DM & CM distributed current and equivalent magnetic circuits. The theoretic equations and the main design points are also given. The DM insert loss curves are compared under different DM inductance. The experiments show the proposed structure has smaller volume and better performance, compared with traditional EMI filters.

Key words： Passive integration flexible multi-layer foil (FML foil) electromagnetic interference filter(EMI filter)

Received: 15 September 2009 Published: 07 March 2014

PACS:

TN713

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors

Cite this article:

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2011/V26/I9/160

[1] 钱照明, 程肇基. 电力电子系统电磁兼容设计基础[M]. 杭州: 浙江大学出版社, 2000.
[2] Wang Shuo, Lee Fred C, Jacobus Daniel Van Wyk. Design of inductor winding capacitance cancellation for EMI suppression[J]. IEEE Transactions on Power Electronic, 2006, 21(6): 1825-1831.
[3] Wang Shuo, Lee Fred C, Jacobus Daniel Van Wyk. Inductor winding capacitance cancellation using mutual capacitance concept for noise reduction application[J]. IEEE Transactions on Power Electronic, 2006, 21(2): 311-317.
[4] Massarini A, Kazimierczuk M K. Self-capacitance of inductors[J]. IEEE Transactions on Power Electronic, 1997, 12(4): 671-676.
[5] Baccigalupi A, Daponte P, Grimaldi D. On a circuit theory approach to evaluate the stray capacitances of two coupled inductors[J]. IEEE Transactions on Instrumentation and Measurement, 1994, 43(5): 774-776.
[6] Kemp R J, Murgatroyd P N, Walker N J. Self resonance in foil inductors[J]. Electronics Letters, 1975, 11(15): 337-338.
[7] Wang S, Lee F C, Odendaal W G. Controlling the parasitic parameters to improve EMI filter performance [C]. Proceedings of the IEEE Applied Power Electronics Conference, Anaheim, CA, 2004, 1: 503-509.
[8] Naito Akira, Sagamihara. U.S.005151812[P]. 1992.
[9] Wu Xiaofeng, Xu Dehong, Zhang Yanjun, et al. Integrated EMI filter design with flexible PCB structure[C]. Power Electronics Specialists Conference, 2008: 1613-1617.
[10] Wu Xiaofeng, Wen Zhiwei, Xu Dehong, et al. An integrating structure of EMI filter based on interleaved flexible multi-layer (FML) foils[C]. Proceedings of the IEEE Applied Power Electronics Conference and Exposition, 2009: 491-497.
[11] 温志伟, 伍晓峰, 徐德鸿, 等. 绕组匝间电容对集成EMI滤波器共模插入损耗的影响[C]. 电工技术学会电力电子技术委员会第十一届年会, 2008: 1472.
[12] Chen Rengang. Integrated EMI filters for switch mode power supplies[D]. USA: Virginia Polytechnic Institute, 2004.
[13] Chen Rengang, Jacobus Daniel Van Wyk, Wang Shuo, et al. Improving the characteristics of integrated EMI filter by embedded conductive layers[J]. IEEE Transactions on Power Electronic, 2005, 20(3): 611-619.
[14] 魏应东, 吴燮华. 开关电源EMI滤波器原理与设计研究[J]. 电源技术应用, 2005, 8(2): 36-40.
[15] DMR95磁芯特性技术数据表. 横店集团东磁股份有限公司. DMR 95 Datasheet. Hengdian Group DMEGC Magnetic Limited Company.
[16] “Kapton film_specs” Datasheet. DuPont company.
[17] Front-end converter FH2000 data sheet. Fuji Electric Co. Ltd.