|
|
Accurate Rotor Flux Orientation Real-Time Correction Strategy for Vector Control of Traction Motors |
Sun Danan1, Liu Zhigang1, Diao Lijun1, Lin Wenli2 |
1. Beijing Jiaotong University Beijing 100044 China 2. Zhejiang University Hangzhou 310028 China |
|
|
Abstract Accurate flux orientation is the key for induction motor indirect field oriented control technology to achieve independent and decoupling control of torque and excitation, accurate flux orientation is sensitive to motor rotor time constant. In this paper, motor excitation and stator voltage control problem affected by misalignment of rotor flux orientation are derived and discussed; the improved rotor flux observer with amplitude and phase compensation based on voltage model is analyzed. In this paper, the other factors which affect accurate flux orientation are attributed to the rotor time constant, and then rotor flux accurate orientation real-time correction strategy based on q-axis flux error is proposed. Simulation and experimental results verify that theoretical analysis is correct and accurate field orientation correction strategy is effective.
|
Received: 02 December 2010
Published: 07 March 2014
|
|
|
|
|
[1] Bose B K. Modern power electronics and AC drives[M]. Beijing: Peking China Machine Press, 2004. [2] 吕昊, 马伟明, 等. 磁场定向不准对感应电机系统性能影响的分析[J]. 电工技术学报, 2005, 20(8): 84-89. Lu Hao, Ma Weiming, et al. Analysis of induction machine system performance influence about field- oriented inaccuracy[J]. Transactions of China Electrotechnical Society, 2005, 20(8): 84-89. [3] Doncker R W De. Parameter sensitivity of indirect universal field-oriented controllers[J]. IEEE Transactions on Power Electronics, 1994, 9(4): 367-376. [4] Mastorocostas C, Kioskeridis I, Margaris N. Thermal and slip effects on rotor time constant vector controlled induction motor drives[J]. IEEE Transactions on Power Electronics, 2006, 21(2): 495-504. [5] Rowan T M, Kerkman R J, Leggate D. A simple on-line adaption for indirect field orientation of an induction machine[J]. IEEE Transactions on Industry Applications, 1991, 27(4): 720-727. [6] Yu Xing, Dunnigan M W, Williams B W. A novel rotor resistance identification method for an indirect rotor flux-oriented controlled induction machine system [J]. IEEE Transactions on Power Electronics, 2002, 17(3): 353-364. [7] Kamankesh S, Khaburi D A. On-line rotor constant estimation for induction motor using two new methods, RLS and SDBP algorithms[C]. CLECO, 2009: 184-188. [8] Xing Yu, Matthew W. Dunnigan. A novel rotor resistance identification method for an indirect rotor flux-orientated controlled induction machine system[J]. IEEE Transactions on Power Electronics, 2002, 17(3): 353-365. [9] 陆海峰, 瞿文龙, 等. 一种基于无功功率的异步电机矢量控制转子磁场准确定向方法[J]. 中国电机工程学报, 2005, 25(16): 116-121. Lu Haifeng, Qu Wenlong, et al. A novel rotor flux oriented scheme of induction motor based on reaction power[J]. Proceedings of the CSEE, 2005, 25(16): 116-121. [10] Degner M W, Guerrero J M. Slip-gain estimation in field-orientation-controlled induction machines using the system transient respones[J]. IEEE Transactions on Industry Applications, 2006, 42(3): 702-711. [11] 樊扬, 瞿文龙, 等. 基于转子磁链q轴分量的异步电机间接矢量控制转差频率校正[J]. 中国电机工程学报, 2009, 29(9): 62-67. Fan Yang, Qu Wenlong, et al. Slip frequency correction method based on rotor flux q axis component for induction machine indirect vector control system [J]. Proceedings of the CSEE, 2009, 29(9): 62-67. [12] 张星, 瞿文龙, 等. 一种消除直流偏置和稳态误差的电压型磁链观测器[J]. 电工电能新技术2006, 25(1): 39-42. Zhang Xing, Qu Wenlong, et al. Method for elimination of DC offset and steady state error for voltage module flux observer[J]. Advanced Technology of Electrical Engineering, 2006, 25(1): 39-42. [13] Sun Danan, Lin Wenli. Energy-closed AC asynchronous drive test system based on field orient-ed vector control[C]. ICIEA, 2009:3576-3580. |
|
|
|