高导热超支化氮化硼/纳米纤维素复合薄膜的界面工程与性能调控

doi:10.19595/j.cnki.1000-6753.tces.251241

Abstract
Figure/Table
References
Related Citation (5)

Download: PDF (14565 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The relentless miniaturization and power intensification in modern microelectronics, with advanced packaging now reaching power densities of 1 000 W/cm², have created unprecedented thermal management challenges. Polymer-based thermal interface materials（TIMs), while offering essential electrical insulation and mechanical compliance for electronic applications, are fundamentally limited by their low intrinsic thermal conductivity, typically 0.2~0.4 W/(m·K). This limitation becomes particularly critical in high-power devices, where efficient heat dissipation is paramount to performance, reliability, and operational longevity. This paper develops an innovative bio-based nanocomposite system that combines surface-engineered hexagonal boron nitride（h-BN）with sustainable nanocellulose（CNF）matrices through an optimized vacuum-filtration self-assembly process. The hyperbranched polymer（HBP）functionalization of h-BN surfaces fundamentally transforms the filler-matrix interface, enabling exceptional thermal performance while maintaining the material's structural integrity.
Material characterization demonstrates that the three-dimensional HBP architecture successfully bridges h-BN layers and the CNF matrix via its densely functionalized terminal groups. Scanning electron microscopy examinations reveal uniform filler distribution without visible agglomerates across all loading fractions（10%~50%), indicating effective suppression of h-BN's inherent restacking tendency. The vacuum-filtration technique forms well-organized structures in which HBP-modified BN nanosheets form continuous thermal pathways within the CNF network. The structural configuration preserves the biopolymer matrix's advantageous properties while facilitating efficient heat transfer through the composite.
Thermal performance evaluation shows remarkable enhancement, with the 50% HBP-BN/CNF composite achieving an in-plane thermal conductivity of 16.941 W/(m·K)-representing a 9.36-fold improvement over pristine CNF（1.809 W/(m·K)）and exceeding most reported bio-based TIMs in literature. This exceptional performance arises from three synergistic mechanisms: first, the aligned BN nanosheet network established via vacuum filtration provides low-resistance pathways for phonon transport. The HBP-mediated interfacial bonding significantly reduces thermal resistance at filler-matrix junctions. The preserved CNF matrix continuity ensures efficient stress transfer. The dynamic mechanical behavior indicates stable performance across the operational temperature range expected for electronic applications.
The sustainable composition offers clear environmental benefits over petroleum-derived polymers, while the aqueous processing route is more energy-efficient than traditional hot-pressing methods. Performance metrics position these composites relative to commercial TIMs, particularly for applications requiring both high thermal conductivity and mechanical flexibility. The solution-processable fabrication suggests good potential for scalability.
This paper provides fundamental insights into several critical aspects of hybrid nanocomposite development: the role of hyperbranched polymer architecture in modifying ceramic-polymer interfaces, the relationship between nanofiller alignment and anisotropic thermal transport in bio-composites, and the process-structure-property correlations in vacuum-filtered nanocomposites. The HBP-BN/CNF system demonstrates exceptional potential for next-generation thermal management applications that require high performance, environmental sustainability, and processing scalability, particularly in advanced microelectronics, flexible displays, and energy storage systems.

Key words： Boron nitride cellulose nanofibers hyperbranched polymers thermally conductive materials

Received: 10 July 2025

PACS:

TM215.3

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhao Yalin
	Liu Boqiang
	Li Songlin
	Ma Guangtong

Cite this article:

Zhao Yalin,Liu Boqiang,Li Songlin等. High Thermal Conductivity Hyperbranched Boron Nitride/Nanocellulose Composite Films: Interface Engineering and Performance Regulation[J]. Transactions of China Electrotechnical Society, 2026, 41(16): 5414-5423.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.251241 OR https://dgjsxb.ces-transaction.com/EN/Y2026/V41/I16/5414

[1] 叶丽军, 洪佳晖, 杨利平, 等. 聚合物导热复合材料三维网络构筑及性能研究进展[J]. 复合材料学报, 2025, 42(10): 5445-5469.
Ye Lijun, Hong Jiahui, Yang Liping, et al.Progress on 3D network construction and properties of thermally conductive polymer composites[J]. Acta Materiae Compositae Sinica, 2025, 42(10): 5445-5469.
[2] 王争东, 曹晓龙, 杨淦秋, 等. 高压大功率IGBT用液晶环氧性能研究(一): 热导率与耐热特性[J]. 电工技术学报, 2025, 40(1): 273-284.
Wang Zhengdong, Cao Xiaolong, Yang Ganqiu, et al.Research on properties of liquid crystalline epoxy for high-voltage and large-power IGBT（part 1): thermal conductivity and heat resistance performance[J]. Transactions of China Electrotechnical Society, 2025, 40(1): 273-284.
[3] 吴阳, 张宇, 孙双双, 等. 自流平加成型有机硅导热灌封胶的制备[J]. 绝缘材料, 2025, 58(6): 88-93.
Wu Yang, Zhang Yu, Sun Shuangshuang, et al.Preparation of self-leveling polyaddition silicone encapsulant with outstanding thermal conductivity[J]. Insulating Materials, 2025, 58(6): 88-93.
[4] Loeblein M, Tsang S H, Pawlik M, et al.High-density 3D-boron nitride and 3D-graphene for high-performance nano-thermal interface material[J]. ACS Nano, 2017, 11(2): 2033-2044.
[5] 林荧, 史玉龙, 刘育豪, 等. 碳化硅功率器件用有机硅灌封胶材料耐温性能研究[J]. 绝缘材料, 2023, 56(12): 24-33.
Lin Ying, Shi Yulong, Liu Yuhao, et al.Temperature resistance of organic silicone encapsulant used in silicone carbide power devices[J]. Insulating Materials, 2023, 56(12): 24-33.
[6] 王路伽, 马晓华, 张建文, 等. 温度陡升下硅橡胶材料电热裂解的反应力场模拟[J]. 绝缘材料, 2023, 56(6): 59-65.
Wang Lujia, Ma Xiaohua, Zhang Jianwen, et al.Reactive force field simulation of electrothermal cracking of silicone rubber under steep temperature rise[J]. Insulating Materials, 2023, 56(6): 59-65.
[7] Hansson J, Nilsson T M J, Ye Lilei, et al. Novel nanostructured thermal interface materials: a review[J]. International Materials Reviews, 2018, 63(1): 22-45.
[8] Yuan Zhenye, Ma Haoqi, Hussien M A, et al.Development and challenges of thermal interface materials: a review[J]. Macromolecular Materials and Engineering, 2021, 306(11): 2100428.
[9] Guo Yongqiang, Pan Lulu, Yang Xutong, et al.Simultaneous improvement of thermal conductivities and electromagnetic interference shielding perfor-mances in polystyrene composites via constructing interconnection oriented networks based on elec-trospinning technology[J]. Composites Part A: Applied Science and Manufacturing, 2019, 124: 105484.
[10] Tian Zhilin, Sun Jiajia, Wang Shaogang, et al.A thermal interface material based on foam-templated three-dimensional hierarchical porous boron nitride[J]. Journal of Materials Chemistry A, 2018, 6(36): 17540-17547.
[11] Xue Bai, Yang Shengdu, Sun Xin, et al.From tanghulu-like to cattail-like SiC nanowire archite-ctures: interfacial design of nanocellulose composites toward high thermal conductivity[J]. Journal of Materials Chemistry A, 2020, 8(29): 14506-14518.
[12] Kang H, Kim H, An J, et al.Thermal conductivity characterization of thermal grease containing copper nanopowder[J]. Materials, 2020, 13(8): 1893.
[13] Jiang Z Y, Li J Y, Qu Z G, et al.Theoretical analysis on thermal grease dry-out degradation in space environment[J]. International Journal of Thermal Sciences, 2022, 179: 107694.
[14] Wang Weixuan, Zhou Wei, Shi Hengyi, et al.Soft and thermally conductive gels by introducing free-movable polymer chains into network[J]. Polymer, 2023, 267: 125642.
[15] Huang Runye, Xie Jiekai, Wu Xihong, et al.Pre-paration of composite cooling boards composed of thermal conductive silica gel and phase change materials for battery thermal management[J]. Energy & Fuels, 2021, 35(16): 13466-13473.
[16] Permal A, Devarajan M, Hung H L, et al.Controlled high filler loading of functionalized Al₂O₃-filled epoxy composites for LED thermal management[J]. Journal of Materials Engineering and Performance, 2018, 27(3): 1296-1307.
[17] 吴焱松, 梅红伟, 廖森林, 等. 复合绝缘子界面发热对护套透水性能的影响[J]. 高压电器, 2025, 61(9): 122-127, 154.
Wu Yansong, Mei Hongwei, Liao Senlin, et al.Influence of interfacial heating on water permeability of silicone rubber sheath of composite insulator[J]. High Voltage Apparatus, 2025, 61(9): 122-127, 154.
[18] Zeng Xiaoliang, Sun Jiajia, Yao Yimin, et al.A combination of boron nitride nanotubes and cellulose nanofibers for the preparation of a nanocomposite with high thermal conductivity[J]. ACS Nano, 2017, 11(5): 5167-5178.
[19] 李志辉, 解曾祺, 李庆民, 等. 多巴胺接枝的纳米氮化硼改性环氧树脂绝缘表面电荷高频消散特性[J]. 电工技术学报, 2023, 38(5): 1116-1128.
Li Zhihui, Xie Zengqi, Li Qingmin, et al.Study on the surface charge dissipation characteristics of epoxy resin modified by dopamine grafted nano boron nitride under high frequency electric stress[J]. Transactions of China Electrotechnical Society, 2023, 38(5): 1116-1128.
[20] Hu Jiantao, Huang Yun, Zeng Xiaoliang, et al.Polymer composite with enhanced thermal condu-ctivity and mechanical strength through orientation manipulating of BN[J]. Composites Science and Technology, 2018, 160: 127-137.
[21] 王开国, 宫金武, 石子帅, 等. 采用氮化铝材料的水冷变压器的热管理方法[J]. 电工技术学报, 2024, 39(21): 6614-6625, 6758.
Wang Kaiguo, Gong Jinwu, Shi Zishuai, et al.Thermal management method for toroidal water-cooling transformer using aluminum nitride material[J]. Transactions of China Electrotechnical Society, 2024, 39(21): 6614-6625, 6758.
[22] Liu Zhan, Li Junhui, Liu Xiaohe.Novel functionalized BN nanosheets/epoxy composites with advanced thermal conductivity and mechanical properties[J]. ACS Applied Materials & Interfaces, 2020, 12(5): 6503-6515.
[23] Kim K, Kim J.Magnetic aligned AlN/epoxy compo-site for thermal conductivity enhancement at low filler content[J]. Composites Part B: Engineering, 2016, 93: 67-74.
[24] Ganguli S, Roy A K, Anderson D P.Improved thermal conductivity for chemically functionalized exfoliated graphite/epoxy composites[J]. Carbon, 2008, 46(5): 806-817.
[25] Ma Pengcheng, Siddiqui N A, Marom G, et al.Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review[J]. Com-posites Part A: Applied Science and Manufacturing, 2010, 41(10): 1345-1367.
[26] Kim K, Ahn K, Ju H, et al.Improvement of insulating and thermal properties of SiO₂-coated copper nano-wire composites[J]. Industrial & Engineering Chemistry Research, 2016, 55(10): 2713-2720.
[27] Huang Xingyi, Zhi Chunyi, Jiang Pingkai, et al.Polyhedral oligosilsesquioxane-modified boron nitride nanotube based epoxy nanocomposites: an ideal dielectric material with high thermal conductivity[J]. Advanced Functional Materials, 2013, 23(14): 1824-1831.
[28] Yin Jun, Li Jidong, Hang Yang, et al.Boron nitride nanostructures: fabrication, functionalization and applications[J]. Small, 2016, 12(22): 2942-2968.
[29] Nistor L, Teodorescu V, Ghica C, et al.The influence of the h-BN morphology and structure on the c-BN growth[J]. Diamond and Related Materials, 2001, 10(3/4/5/6/7): 1352-1356.
[30] Blase X, Rubio A, Louie S G, et al.Stability and band gap constancy of boron nitride nanotubes[J]. Europhysics Letters（EPL), 1994, 28(5): 335-340.
[31] Deshmukh A R, Jeong J W, Lee S J, et al.Ultrasound-assisted facile green synthesis of hexagonal boron nitride nanosheets and their applications[J]. ACS Sustainable Chemistry & Engineering, 2019, 7(20): 17114-17125.
[32] Zhao Yalin, Wu Zhixiong, Huang Rongjin, et al.Hyperbranched boron nitride structure-based epoxy composite: Simultaneous enhancement of mechanical properties, thermal conductivity, and superior electrical insulation at cryogenic temperatures[J]. Polymer Composites, 2024, 45(9): 7967-7978.
[33] Zhao Yalin, Wu Zhixiong, Guo Shibin, et al.Hyperbranched graphene oxide structure-based epoxy nanocomposite with simultaneous enhanced mechanical properties, thermal conductivity, and superior elec-trical insulation[J]. Composites Science and Tech-nology, 2022, 217: 109082.