基于改进型标量磁位法的无槽永磁电机电磁性能解析计算

doi:10.19595/j.cnki.1000-6753.tces.251218

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (5990 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Slotless permanent magnet (PM) motors have gained significant traction in applications demanding superior control performance, compact size, and lightweight design, such as new energy vehicles, aerospace, medical ventilators, and surgical tools. During the initial design phase, rapid and accurate evaluation of electromagnetic performance is crucial. While finite element analysis (FEA) offers precision, it is computationally intensive and time-consuming, especially for iterative parameter optimization. Analytical methods based on scalar magnetic potential (SMP) provide a fast alternative but have struggled to accurately capture the effects of armature reaction and PM remanence, limiting their predictive capability for loaded performance.
This paper proposes an improved SMP-based semi-analytical model in the complex frequency domain for radial flux slotless PM motors. The core innovation lies in effectively integrating both armature reaction and PM remanence into the solution framework. Firstly, a two-dimensional semi-analytical model is established. The remanent magnetization of the PMs is explicitly incorporated into the formulation of Laplace's equation as a source term. Crucially, the armature reaction is equivalently represented by thin current sheets distributed along the inner and outer radial boundaries of the winding region. The interior of the winding region is treated as a vacuum, ensuring the curl of the magnetic field is zero within this domain. This treatment satisfies the fundamental requirement for applying the SMP method throughout the problem space. The governing Laplace equations for the PM region and the subdivided air-gap regions are derived in matrix form, incorporating harmonic components via Fourier series expansion up to a maximum order. The magnetization distributions for both radial and parallel magnetization patterns are rigorously defined in terms of Fourier series coefficients.
Secondly, the model analyzes the influence of key design parameters-including the number of pole pairs, pole-arc coefficient, magnetization method, and winding spatial distribution-on the resulting armature reaction field and overall electromagnetic performance. Semi-analytical expressions for the critical electromagnetic quantities are derived: the radial and tangential air-gap flux densities, the back electromotive force (EMF), and the electromagnetic torque. The derivation distinguishes the harmonic order multiplied by the pole pairs equals ±1. Torque and EMF expressions account for winding topology and distribution factors.
Thirdly, the accuracy of the proposed analytical method is validated through FEA simulations and experimental measurements. FEA comparisons for air-gap flux density under various load currents, pole pairs, magnetization types, and pole-arc coefficients demonstrate excellent waveform agreement, highlighting the model's ability to capture flux distortion due to armature reaction. Back-EMF and torque predictions for different motor configurations and current waveforms show negligible deviation from FEA results.
Finally, a 6-coil-group, 4-pole (6S4P) slotless PM motor prototype was fabricated and tested. Measured no-load back-EMF waveforms align closely with both analytical and FEA predictions, with a minor amplitude discrepancy attributed to manufacturing and magnetization tolerances. Load torque measurements using a specialized test rig confirm the model's accuracy. The analytical torque deviates by only 1.26% from the measured value, closely matching FEA simulations. Measured air-gap flux density under load also validates the predicted distortion trends.
In conclusion, the proposed improved SMP method incorporates armature reaction and remanence effects for slotless PM motors. FEA simulations and experiments validate its high accuracy for predicting key electromagnetic performance metrics, including flux density, back-EMF, and torque under load. This method provides an efficient, precise analytical tool for the initial design and optimization stages of slotless PM motors, serving as a viable alternative to computationally expensive FEA when frequent parameter adjustments are required.

Key words： Scalar magnetic potential method armature reaction remanence electromagnetic characteristics permanent magnet machine

Received: 10 July 2025

PACS:

TM351

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Li Hongjie
	Yang Jiangtao
	Guo Quan
	Huang Shoudao

Cite this article:

Li Hongjie,Yang Jiangtao,Guo Quan等. Analytical Calculation of Electromagnetic Performance for Slotless Permanent Magnet Motors Based on Improved Scalar Magnetic Potential Method[J]. Transactions of China Electrotechnical Society, 2026, 41(14): 4718-4732.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.251218 OR https://dgjsxb.ces-transaction.com/EN/Y2026/V41/I14/4718

[1] 赵晓坤, 黄梓旭, 郭启超, 等. 不对称转子永磁辅助同步磁阻电机转矩比例系数对转矩提升能力的影响研究[J]. 电机与控制应用, 2025, 52(8): 879-887.
Zhao Xiaokun, Huang Zixu, Guo Qichao, et al.Investigation of torque proportion coefficient impact on torque enhancement in the asymmetric rotor PMa-SynRM[J]. Electric Machines & Control Application, 2025, 52(8): 879-887.
[2] 李欣, 王皓, 张凤阁. 电主轴用复合转子无槽高速永磁电机设计与分析[J]. 微电机, 2024, 57(12): 6-11, 23.
Li Xin, Wang Hao, Zhang Fengge.Design and analysis of slotless high-speed permanent magnet motor with compound rotor for motorized spindle[J]. Micromotors, 2024, 57(12): 6-11, 23.
[3] 李昊岩, 许海平, 陈曦. 定子无铁心永磁无刷直流电机驱动拓扑设计方案及对比[J]. 电工技术学报, 2023, 38(24): 6619-6631.
Li Haoyan, Xu Haiping, Chen Xi.Design and comparison of drive topologies for stator-ironless permanent magnet brushless DC motor[J]. Transac-tions of China Electrotechnical Society, 2023, 38(24): 6619-6631.
[4] 李珍国, 韩启萌, 贾益丞, 等. 基于回馈升压逆变器的无刷直流电机宽速度范围转矩脉动抑制[J]. 电工技术学报, 2024, 39(6): 1725-1736.
Li Zhenguo, Han Qimeng, Jia Yicheng, et al.Torque ripple suppression in wide speed range of brushless DC motor based on regenerative boost inverter[J]. Transactions of China Electrotechnical Society, 2024, 39(6): 1725-1736.
[5] Yang Jiangtao, Dai Shaoren, Wang Zhenyu, et al.Influence of rotor eccentricity on electromagnetic performance of rotational symmetrical slotless PM brushless motor[J]. IEEE Transactions on Trans-portation Electrification, 2024, 10(2): 3888-3901.
[6] 刘晋鹏, 王秀和, 孙玲玲, 等. 无刷直流电机六步换相控制下共模电压的快速准确计算与抑制措施[J]. 电工技术学报, 2025, 40(18): 5892-5906.
Liu Jinpeng, Wang Xiuhe, Sun Lingling, et al.Rapid and accurate calculation of common mode voltage under six-step communication control of BLDC motor and its suppression approach[J]. Transactions of China Electrotechnical Society, 2025, 40(18): 5892-5906.
[7] 吕佳徽, 董婷. 柔性PCB绕组径向磁通微型永磁电机设计[J]. 电机与控制应用, 2023, 50(7): 13-20.
Lü Jiahui, Dong Ting.Design of radial flux per-manent magnet micromotor with flexible PCB winding[J]. Electric Machines & Control Application, 2023, 50(7): 13-20.
[8] 佟文明, 杜绍雨, 贾建国, 等. 基于改进复相对磁导函数的开槽轴向磁通永磁电机气隙磁场解析模型[J]. 电工技术学报, 2024, 39(24): 7700-7711.
Tong Wenming, Du Shaoyu, Jia Jianguo, et al.Analytical model of air-gap magnetic field of slotted axial flux permanent magnet motor based on improved complex relative permeance function[J]. Transactions of China Electrotechnical Society, 2024, 39(24): 7700-7711.
[9] 佟文明, 杨先凯, 鹿吉文, 等. 双层永磁体结构高速永磁电机转子涡流损耗解析模型[J]. 电工技术学报, 2024, 39(20): 6293-6304.
Tong Wenming, Yang Xiankai, Lu Jiwen, et al.Rotor eddy current loss analytical model for high-speed permanent magnet motor based on double layer permanent magnet structure[J]. Transactions of China Electrotechnical Society, 2024, 39(20): 6293-6304.
[10] 程文杰, 卜婵, 肖玲, 等. 基于相对复数磁导的表贴式永磁电机气隙磁场解[J]. 电机与控制学报, 2024, 28(12): 161-169.
Cheng Wenjie, Bu Chan, Xiao Ling, et al.Air-gap magnetic field solution of surface-type permanent magnet motor based on relative complex permeabi-lity[J]. Electric Machines and Control, 2024, 28(12): 161-169.
[11] Tessarolo A, Branz L, Bruzzese C.A compact analytical expression for the load torque in surface permanent-magnet machines with slotless stator design[C]//IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), Paris, France, 2013.
[12] Min S G.Analytical design and optimization of axial flux permanent magnet machines with slotless structure[J]. IEEE Transactions on Transportation Electrification, 2022, 8(2): 1994-2004.
[13] 常勇, 包广清, 许瑾, 等. 采用改进子域模型的表贴式永磁游标电机磁场解析计算[J]. 西安交通大学学报, 2023, 57(7): 62-73.
Chang Yong, Bao Guangqing, Xu Jin, et al.Analytical calculation of magnetic field in surface-mounted permanent magnet vernier machine based on improved subdomain model[J]. Journal of Xi'an Jiaotong University, 2023, 57(7): 62-73.
[14] 王明杰, 徐伟, 杨存祥, 等. 基于精确子域模型的永磁直线同步电机空载磁场解析计算[J]. 电工技术学报, 2020, 35(5): 942-953.
Wang Mingjie, Xu Wei, Yang Cunxiang, et al.Analytical calculation of no-load magnetic field in permanent magnet linear synchronous motors based on an accurate subdomain model[J]. Transactions of China Electrotechnical Society, 2020, 35(5): 942-953.
[15] Rahideh A, Mardaneh M, Korakianitis T.Analytical 2-D calculations of torque, inductance, and back-EMF for brushless slotless machines with surface inset magnets[J]. IEEE Transactions on Magnetics, 2013, 49(8): 4873-4884.
[16] Tessarolo A, Bortolozzi M, Bruzzese C.Explicit torque and back EMF expressions for slotless surface permanent magnet machines with different magneti-zation patterns[J]. IEEE Transactions on Magnetics, 2016, 52(8): 8107015.
[17] Kazerooni K, Rahideh A, Aghaei J.Experimental optimal design of slotless brushless PM machines based on 2-D analytical model[J]. IEEE Transactions on Magnetics, 2016, 52(5): 8103116.
[18] 才志强. 基于精确子域法的表贴式永磁同步电机磁特性研究[D]. 哈尔滨: 哈尔滨理工大学, 2022.
Cai Zhiqiang.Research on magnetic characteristics of surface mount permanent magnet synchronous motor based on accurate sub-domain method[D]. Harbin: Harbin University of Science and Technology, 2022.
[19] 刘汇. 基于子域法的表贴式永磁电机磁场分析计算[D]. 哈尔滨: 哈尔滨理工大学, 2024.
Liu Hui.Calculation of magnetic field analysis of surface-mounted permanent magnet motor based on subdomain method abstract[D]. Harbin: Harbin University of Science and Technology, 2024.
[20] 赵士豪, 陈进华, 张驰, 等. 不均匀气隙表贴式永磁同步电机磁场解析计算[J]. 电工技术学报, 2022, 37(14): 3502-3513.
Zhao Shihao, Chen Jinhua, Zhang Chi, et al.Analytical calculation of magnetic field of permanent magnet synchronous motor with uneven air gap structure[J]. Transactions of China Electrotechnical Society, 2022, 37(14): 3502-3513.
[21] 乔峰. 飞轮储能用高速永磁同步电机设计与分析[D]. 沈阳: 沈阳工业大学, 2023.
Qiao Feng.Design and analysis of high-speed permanent magnet synchronous motor for flywheel energy storage[D]. Shenyang: Shenyang University of Technology, 2023.
[22] Zhu Z Q, Howe D, Chan C C.Improved analytical model for predicting the magnetic field distribution in brushless permanent-magnet machines[J]. IEEE Trans-actions on Magnetics, 2002, 38(1): 229-238.
[23] Markovic M, Perriard Y.Simplified design methodo-logy for a slotless brushless DC motor[J]. IEEE Transactions on Magnetics, 2006, 42(12): 3842-3846.
[24] Sprangers R L J, Paulides J J H, Gysen B L J, et al. Magnetic saturation in semi-analytical harmonic modeling for electric machine analysis[J]. IEEE Transactions on Magnetics, 2016, 52(2): 1-10.
[25] Guo Baocheng, Djelloul-Khedda Z, Dubas F.Nonlinear analytical solution in axial flux permanent magnet machines using scalar potential[J]. IEEE Transactions on Industrial Electronics, 2024, 71(4): 3383-3393.