考虑长程依赖性的永磁同步电机滚动轴承可靠性评估

doi:10.19595/j.cnki.1000-6753.tces.252091

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (1273 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract

Rolling bearing failures are a primary cause of malfunctions in permanent magnet synchronous motors (PMSMs), impairing operational stability and safety. Bearing degradation processes exhibit long-range dependence (LRD), meaning increments over non-overlapping time intervals are non-independent, while traditional Wiener process degradation models rely on an independent increment assumption and thus fail to characterize LRD. Additionally, conventional bearing degradation feature extraction methods depend on vibration signals, requiring extra accelerometers and limiting engineering applicability. To address these issues, an accelerated degradation model for PMSM rolling bearings based on stator current features and accounting for LRD is proposed to improve the accuracy of bearing reliability assessment.
Firstly, degradation features are directly extracted from PMSM stator current signals, eliminating the need for additional sensors and improving the engineering feasibility of bearing condition monitoring. Secondly, fractional Brownian motion (FBM) is adopted to characterize the LRD inherent in the bearing degradation process, and an inverse power law acceleration model is used to correlate degradation rate with stress level, which allows model parameter extrapolation from accelerated stress conditions to normal operating conditions. A linear mapping is established between vibration and current features as well, enabling the degradation model to be formulated based on current features while retaining the LRD property of the original degradation process. Thirdly, maximum likelihood estimation is applied for model parameter identification, with a genetic algorithm utilized to solve the global optimization problem caused by the complex structure of the likelihood function. Finally, the weak convergence theorem and space-time transformation are combined to derive an analytical expression for the lifetime probability density function of the proposed degradation model, providing a theoretical basis for the quantitative reliability assessment of PMSM rolling bearings.
To verify the effectiveness of the proposed method, accelerated degradation tests are conducted on 16 samples under four radial load levels, with synchronous acquisition of vibration and stator current signals. A strong linear correlation is observed between vibration root mean square values and current-based features. Parameter estimation results show that the Hurst index H is greater than 0.5, confirming the presence of LRD in the bearing degradation process. Furthermore, model comparison based on the Akaike information criterion demonstrates that the proposed model outperforms the traditional Wiener and Wiener-Inverse Gaussian models. Cross validation across different stress levels verifies the high extrapolation accuracy of the proposed method, and lifetime predictions under normal operating conditions differ significantly from those of traditional independent-increment models, which highlights the notable impact of LRD on bearing reliability assessment.
Some specific conclusions are summarized as follows: (1) Extracting degradation features from the stator current signal of the motor avoids the need for additional acceleration sensors, which reduces the system deployment cost and invasiveness, and the established linear correlation between current features and vibration features ensures the effectiveness of current features as an indirect evaluation index for bearing degradation states. (2) The proposed accelerated degradation model for PMSM rolling bearings can accurately characterize the LRD of the bearing degradation process by introducing FBM, and combined with the inverse power law acceleration model, it can realize the extrapolation of motor bearing reliability from accelerated stress levels to normal stress levels. (3) Experimental validation results confirm that the proposed degradation model achieves higher accuracy in bearing reliability assessment compared with traditional degradation models based on the Wiener process.

Key words： Motor bearings current signals long-range dependence (LRD) fractional Brownian motion (FBM) reliability assessment

Received: 10 December 2025

PACS:	TM34
	TB114.3

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Niu Feng
	Sang Yuhao
	Zhao Changdong
	Xiang Shihu
	Chen Jianlin

Cite this article:

Niu Feng,Sang Yuhao,Zhao Changdong等. Reliability Assessment of Permanent Magnet Synchronous Motor Rolling Bearings Considering Long-Range Dependence[J]. Transactions of China Electrotechnical Society, 0, (): 39-.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.252091 OR https://dgjsxb.ces-transaction.com/EN/Y0/V/I/39

[1] 卢锦玲,张祥国,张伟,等.基于改进辅助分类生成对抗网络的风机主轴承故障诊断[J].电力系统自动化,2021,45(07):148-154.
Lu Jinglin, Zhang Xiangguo, Zhang Wei, et al.Fault Diagnosis of Main Bearing of Wind Turbine Based on Improved Auxiliary Classifier Generative Adversarial Network[J]. Automation of Electric Power Systems, 2021, 45(07): 148-154.
[2] 罗培恩,尹忠刚,原东昇,等.基于自适应和弦变换旋转蒸发策略的电机轴承未知故障诊断[J].电工技术学报,2026,41(02):499-511.
Luo Peien, Yin Zhonggang, Yuan Dongsheng, et al.Unknown Fault Diagnosis of Motor Bearings Based on Adaptive Chord Transformation Rotation Evaporation Strategy[J]. Transactions of China Electrotechnical Society, 2026, 41(02): 499-511.
[3] 王攀攀,李兴宇,张成,等.基于角域重采样和特征强化的电机滚动轴承故障迁移诊断方法[J].电工技术学报,2025,40(12):3905-3916.
Wang Panpan, Li Xingyu, Zhang Cheng, et al.Fault Transfer Diagnosis Method for Motor Rolling Bearings Based on Angular Domain Resampling and Feature Enhancement[J]. Transactions of China Electrotechnical Society, 2025, 40(12): 3905-3916.
[4] 迟连强,张殿海,赵俊清,等.旋转电机轴承电蚀损伤机理与缓解措施研究进展[J].电工技术学报,2024,39(20):6409-6430.
Chi Lianqiang, Zhang Dianhai, Zhao Junqing, et al.Research Progress on the Mechanism and Mitigation Measure of Electrical Corrosion Damage in Rotating Motor Bearings[J]. Transactions of China Electrotechnical Society, 2024, 39(20): 6409-6430.
[5] Yu Aodi, Huang Hongzhong, Li Yanfeng, et al.A modified nonlinear fatigue damage accumulation model for life prediction of rolling bearing under variable loading conditions[J]. Fatigue & Fracture of Engineering Materials & Structures, 2022, 45: 852-864.
[6] Zhang Hanwen, Zhou Donghua, Chen Maoyin, et al.Predicting remaining useful life based on a generalized degradation with fractional Brownian motion[J]. Mechanical Systems and Signal Processing, 2019, 115: 736-752.
[7] Zhang Hanwen, Chen Maoyin, Shang Jun, et al.Stochastic process-based degradation modeling and RUL prediction: from Brownian motion to fractional Brownian motion[J]. Science China Information Sciences, 2021, 64: 1-20.
[8] Hu Yaogang, Li Hui, Shi Pingping, et al.A prediction method for the real-time remaining useful life of wind turbine bearings based on the Wiener process[J]. Renewable Energy, 2018, 127: 452-460.
[9] 李贵衡,张健,黄少坡,等.基于Wiener过程的电机主绝缘材料寿命预测方法[J].电机与控制学报,2023,27(11):40-47,57.
Li Guiheng, Zhang Jian, Huang Shaopo, et al.Life Prediction Method of Motor Ground-Wall Insulation Material Based on Wiener Process[J]. Electric Machines and Control, 2023, 27(11): 40-47, 57.
[10] Xiang Shihu, Li Guiheng, Zhou Feng, et al.Life Prediction of Ground Wall Insulation Material in Electric Motors Based on Accelerated Degradation Test under Different Failure Mechanisms[J]. IEEE Journal of Emerging and Selected Topics in Industrial Electronics, 2025, 6: 654-663.
[11] Li Yuxiong, Huang Xianzhen, Ding Pengfei.Wiener based remaining useful life prediction of rolling bearings using improved Kalman filtering and adaptive modification[J]. Measurement, 2021, 182: 109706.
[12] 李兵,梁舒奇,单万宁,等.基于改进正余弦算法优化堆叠降噪自动编码器的电机轴承故障诊断[J].电工技术学报,2022,37(16):4084-4093.
Li Bing, Liang Shuxi, Shan Waning, et al.Motor Bearing Fault Diagnosis Based on Improved Sine and Cosine Algorithm for Stacked Denoising Autoencoders[J]. Transactions of China Electrotechnical Society, 2022, 37(16): 4084-4093.
[13] Blödt Martin, Regnier Jérémi, Faucher Jean.Distinguishing Load Torque Oscillations and Eccentricity Faults in Induction Motors Using Stator Current Wigner Distributions[J]. IEEE Transactions on Industry Applications, 2009, 45: 1991-2000.
[14] 宋向金,王卓,胡静涛,等.Hilbert解调制方法诊断异步电机轴承故障[J].电工技术学报,2018,33(21):4941-4948.
Song Xiangjin, Wang Zhuo, Hu Jingtao, et al.Diagnosis of Bearing Fault in Induction Motors Using Hilbert Demodulation Approach[J]. Transactions of China Electrotechnical Society, 2018, 33(21): 4941-4948.
[15] Stack J R, Habetler T G, Harley R G.Fault Classification and Fault Signature Production for Rolling Element Bearings in Electric Machines[J]. IEEE Transactions on Industry Applications, 2004, 40: 735-739.
[16] Liao H, Elsayed E A.Reliability inference for field conditions from accelerated degradation testing[J]. Naval Research Logistics, 2006, 53(6): 576-587.
[17] 李晗. 基于加速退化试验的机械密封性能研究[D].青岛:中国石油大学(华东),2020.
[18] Levitin G, Xing L, Xiang Y.Optimal multiple replacement and maintenance scheduling in two-unit systems[J]. Reliability Engineering and System Safety, 2021, 213: 107803.
[19] Xiaopeng Xi, Maoyin Chen, Hanwen Zhang, et al. An improved non-Markovian degradation model with long term dependency and item-to-item uncertainty[J]. Mechanical Systems and Signal Processing, 2018, 105: 467-480.
[20] Zhang Hanwen, Chen Maoyin, Xi Xiaopeng, et al.Remaining Useful Life Prediction for Degradation Processes with Long-Range Dependence[J]. IEEE Transactions on Reliability, 2017, 66: 1368-1379.
[21] 李晓阳. 动车组牵引电机轴承游隙对载荷的影响及轴承寿命分析[D].北京:北京交通大学,2019.
[22] 刘帼巾,李想,王泽,等.基于Wiener过程电子式漏电断路器的剩余寿命预测[J].电工技术学报,2022,37(02):528-536.
Liu Guojin, Li Xiang, Wang Ze, et al.Remaining Life Prediction of Electronic Residual Current Circuit Breaker Based on Wiener Process[J]. Transactions of China Electrotechnical Society, 2022, 37(02): 528-536.
[23] 雷亚国,韩天宇,王彪,等.XJTU-SY滚动轴承加速寿命试验数据集解读[J].机械工程学报,2019,55(16):1-6.
Lei Yaguo, Han Tianyu, Wang Biao, et al.XJTU-SY Rolling Element Bearing Accelerated Life Test Datasets: A Tutorial[J]. Journal of Mechanical Engineering, 2019, 55(16): 1-6.