|
|
|
| Magnetic Focusing Enhancement with Non-Centrosymmetric Excitation Unit for Matrix Coil in Wireless Power Transfer System |
| Jiang Jincheng1, Hong Ye1, Deng Pengqi2, Fu Shiming3 |
1. College of Automation Chongqing University of Posts and Telecommunications Chongqing 400065 China;
2. College of Optoelectronic Engineering Chongqing University of Posts and Telecommunications Chongqing 400065 China;
3. School of Artificial Intelligence Chongqing University of Education Chongqing 400065 China |
|
|
|
Abstract The magnetic field's compactness can better increase energy's transmission distance in a near-filed wireless power transfer (WPT) system. This paper proposes a non-centrosymmetric excitation unit (NEU) design method for the WPT system with a matrix coupling mechanism to improve the magnetic flux density in the central region. The proposed method enhances the magnetic focusing performance with a flat two-dimensional structure while maintaining its misalignment tolerance without any other auxiliary coil or circuit. The self-inductance value of the transmitting coil in this design method is even smaller than that of the conventional design method under the same size and number of turns. In addition, the proposed method is applicable to all regular matrix coils. Then, a detailed design method of the coupler is given based on the circuit analysis. Finally, taking the LCL-LCC compensation WPT system as an example, the feasibility of the proposed design method is verified. Compared to traditional design methods, the proposed design method can increase the induced voltage by 24.7% at the optimal position.
The current mobile robot UAV (unmanned aerial vehicle)/AGV (automated guided vehicle) plays an important role in industrial inspection, office logistics, agricultural and forestry plant protection, and military reconnaissance and surveillance fields. A multi-level, multi-modal power supply demonstration application has been designed in intelligent parks and industrial inspections to achieve charging docking between unmanned devices. However, most power supply methods are fixed-point charging, which is complicated in the energy transmission process and faces energy loss problems. In special charging environments such as wilderness and underwater, if there is no suitable parking charging platform condition, UAV hovering charging technology has become the most necessary and perfect charging solution, and it is also the key to building wireless power transmission network environments. Based on the well-established technology of fixed-point hovering and hovering following for unmanned inspection equipment in the air-to-air, ground-to-ground, and air-to-ground scenarios, hovering and alignment energy replenishment is undoubtedly a highly efficient and cutting-edge design concept applied to unmanned inspection equipment. Nowadays, to further enhance the flexibility and reliability of wireless charging systems, more and more wireless charging systems are designed based on matrix coils. The matrix-based multi-excitation wireless charging system has gained more favor in charging applications due to its reconstruction mechanism of the magnetic field at the transmitting end and strong tolerance for voltage and current stress.
In summary, a matrix coil design method based on non-centrosymmetric excitation units is proposed, combined with an evaluation of the system's spatial field transmission capability to improve the optimization design steps and the focusing ability of the magnetic field. This design method, which has a two-dimensional planar structure, enhances the magnetic flux density at the center position without any auxiliary coils or circuits, avoiding the offset tolerance weakening of the matrix coil itself as much as possible. It reduces the self-inductance of the coil unit to improve mutual inductance utilization.
|
|
Received: 11 October 2024
|
|
|
|
|
|
[1] 杨庆新, 张献, 章鹏程. 电动车智慧无线电能传输云网[J]. 电工技术学报, 2023, 38(1): 1-12.
Yang Qingxin, Zhang Xian, Zhang Pengcheng.Intelligent wireless power transmission cloud network for electric vehicles[J]. Transactions of China Elec-trotechnical Society, 2023, 38(1): 1-12.
[2] 田勇, 杨昊, 胡超, 等. 基于毫米波雷达的电动汽车无线充电运动异物检测与跟踪[J]. 电工技术学报, 2023, 38(2): 297-308.
Tian Yong, Yang Hao, Hu Chao, et al.Moving foreign object detection and track for electric vehicle wireless charging based on millimeter-wave radar[J]. Transactions of China Electrotechnical Society, 2023, 38(2): 297-308.
[3] 周玮, 郑宇锋, 陈泽林, 等. 基于副边解耦极板的电容式无线电能传输系统拾取端失谐评估[J]. 电力系统自动化, 2024, 48(3): 142-149.
Zhou Wei, Zheng Yufeng, Chen Zelin, et al.Detuning estimation of pickup loop in capacitive wireless power transfer system based on secondary-side decoupled capacitive coupler[J]. Automation of Electric Power Systems, 2024, 48(3): 142-149.
[4] 刘祺, 薛明, 章鹏程, 等. 基于无线充电系统的多模块扩展均压技术研究与设计[J]. 电工技术学报, 2024, 39(22): 6980-6989.
Liu Qi, Xue Ming, Zhang Pengcheng, et al.Modular extensible voltage equalization based on wireless charging system[J]. Transactions of China Electro-technical Society, 2024, 39(22): 6980-6989.
[5] 陈志鑫, 张献, 沙琳, 等. 基于频率调节的电动汽车无线充电互操作性提升方法研究[J]. 电工技术学报, 2023, 38(5): 1237-1247.
Chen Zhixin, Zhang Xian, Sha Lin, et al.Research on improving interoperability of electric vehicle wireless power transfer based on frequency adjustment[J]. Transactions of China Electrotechnical Society, 2023, 38(5): 1237-1247.
[6] 孙天, 宋贝贝, 崔淑梅, 等. 电动汽车无线充电系统接收端位置大范围唯一性辨识系统设计[J]. 电工技术学报, 2024, 39(21): 6626-6635.
Sun Tian, Song Beibei, Cui Shumei, et al.Design of accurate position detection system applied to large misalignment range for electric vehicle wireless charging system[J]. Transactions of China Electro-technical Society, 2024, 39(21): 6626-6635.
[7] 程志远, 宋晓逸, 吴晓婷, 等. 无线充电系统旋转式电磁耦合器损耗计算及热点温度研究[J]. 电工技术学报, 2024, 39(7): 1932-1942.
Cheng Zhiyuan, Song Xiaoyi, Wu Xiaoting, et al.Loss calculation and hot spot temperature research of rotary electromagnetic coupler in wireless charging system[J]. Transactions of China Electrotechnical Society, 2024, 39(7): 1932-1942.
[8] Dellabate A, Lazzoni V, Brizi D, et al.Near-field focusing conformal magnetic metasurface for wireless power transfer[C]//2023 IEEE International Sympo-sium on Antennas and Propagation and USNC-URSI Radio Science Meeting (USNC-URSI), Portland, OR, USA, 2023: 531-532.
[9] Nam Y H, Lee J H.Efficient near-field beamforming using two-layer planar loop array for magnetic reso-nance wireless power transfer[J]. IEEE Microwave and Wireless Components Letters, 2020, 30(8): 818-820.
[10] 陈伟华, 宋宇航, 闫孝姮, 等. 心脏起搏器无线电能传输LCC-LCC磁集成印刷螺旋线圈研究[J]. 电工技术学报, 2024, 39(17): 5289-5299.
Chen Weihua, Song Yuhang, Yan Xiaoheng, et al.Research on wireless power transmission for cardiac pacemakers using LCC-LCC magnetic integrated printed spiral coil[J]. Transactions of China Elec-trotechnical Society, 2024, 39(17): 5289-5299.
[11] 何亚伟, 李阳, 杨庆新, 等. 磁耦合谐振式无线电能传输线圈的磁聚焦仿真[J]. 天津工业大学学报, 2015, 34(2): 75-79.
He Yawei, Li Yang, Yang Qingxin, et al.Simulation of focus magnetic field of magnetically coupled resonant wireless power transfer coil[J]. Journal of Tianjin Polytechnic University, 2015, 34(2): 75-79.
[12] 冯天旭, 史可, 孙跃, 等. 基于互感识别及移相角优化的全方位无线电能传输系统靶向传能方法[J].电工技术学报, 2023, 38(24): 6581-6595.
Feng Tianxu, Shi Ke, Sun Yue, et al.Targeted power transfer method for omnidirectional wireless power transfer system based on mutual inductance identi-fication and phase-shift angle optimization[J]. Transa-ctions of China Electrotechnical Society, 2023, 38(24): 6581-6595.
[13] Jung H, Lee B.Optimization of magnetic field focusing and null steering for selective wireless power transfer[J]. IEEE Transactions on Power Elec-tronics, 2020, 35(5): 4622-4633.
[14] Kang Ning, Shao Yaoxia, Liu Ming, et al.Analysis and implementation of 3D magnetic field shaping via a 2D planar transmitting coil array[J]. IEEE Transa-ctions on Power Electronics, 2022, 37(1): 1172-1184.
[15] Budak A, Durna E.Performance evaluation of inductive wireless power transfer for high-speed non-contact slip ring applications[C]//2022 IEEE Applied Power Electronics Conference and Expo-sition (APEC), Houston, TX, USA, 2022: 500-504.
[16] Hariri A O, Berzoy A, Mohamed A A S, et al. Performance evaluation of a wireless power transfer system using coupled 3D finite element-circuit model[C]//2015 IEEE Wireless Power Transfer Conference (WPTC), Boulder, CO, USA, 2015: 1-4.
[17] Cetin S, Demirci Y E, Yenil V.Performance evaluation of wireless power transfer compensation topologies for active implantable medical devices[C]//2021 IEEE 19th International Power Electronics and Motion Control Conference (PEMC), Gliwice, Poland, 2021: 798-803.
[18] Xiang Lijuan, Sun Yue, Dai Xin, et al.Evaluation of magnetic coupler for stationary EVs' wireless charging[J]. International Journal of Applied Elec-tromagnetics and Mechanics, 2017, 53(1): 167-179.
[19] 郑小瑶, 江彦伟, 疏许健, 等. 宇称-时间对称电场耦合无线电能传输系统电场分布特性研究[J]. 电源学报, 2024, 22(5): 60-66.
Zheng Xiaoyao, Jiang Yanwei, Shu Xujian, et al.Study on electric-field distribution characteristics of parity-time symmetric electric-field coupled wireless power transfer system[J]. Journal of Power Supply, 2024, 22(5): 60-66.
[20] 赖禹同, 郭锋, 唐自强, 等. 双负载磁谐振S-LCL无线充电系统频率分叉分析[J]. 电气工程学报, 2023, 18(1): 86-93.
Lai Yutong, Guo Feng, Tang Ziqiang, et al.Analysis of frequency bifurcation of dual load magnetic resonance S-LCL wireless charging system[J]. Journal of Electrical Engineering, 2023, 18(1): 86-93.
[21] 王成亮, 潘志新, 翟学锋, 等. 基于改进粒子群算法的无线充电系统参数优化[J]. 电气传动, 2023, 53(3): 64-69.
Wang Chengliang, Pan Zhixin, Zhai Xuefeng, et al.Parameter optimization of wireless charging system based on improved PSO algorithm[J]. Electric Drive, 2023, 53(3): 64-69.
[22] Wen Feng, Cheng Xingchen, Li Qiang, et al.A strong misalignment tolerance dual-channel coupler for wireless power transfer system[J]. IEEE Transactions on Applied Superconductivity, 2021, 31(8): 0601005.
[23] Feng Jing, Wei Guo, Zhang Jiantao, et al.An LCCC-LCC compensated dual-coupled WPT system with MI enhancement and high misalignment tolerance[J]. IEEE Transactions on Power Electronics, 2023, 38(12): 15162-15167.
[24] Shi Ke, Feng Tianxu, Jiang Jincheng, et al.A highly magnetic integrated method of LCC-compensated IPT system with excellent misalignment tolerance[J]. IEEE Transactions on Power Electronics, 2023, 38(12): 16256-16268.
[25] Raju S, Wu Rongxiang, Chan Mansun, et al.Mode-ling of mutual coupling between planar inductors in wireless power applications[J]. IEEE Transactions on Power Electronics, 2014, 29(1): 481-490.
[26] Zhong W X, Liu Xun, Ron Hui S Y. A novel single-layer winding array and receiver coil structure for contactless battery charging systems with free-positioning and localized charging features[J]. IEEE Transactions on Industrial Electronics, 2011, 58(9): 4136-4144.
[27] Zhu Lei, Wang Laili, Wu Min, et al.Precise modeling and design of self-resonant for high-efficiency mid-range wireless power transfer system[J]. IEEE Transactions on Power Electronics, 2023, 38(6): 7848-7862.
[28] 陈雨晨, 陈凯楠, 郑树轩, 等. 无线电能传输磁耦合机构磁心解析模型与设计方法[J]. 电气技术, 2022, 23(6): 83-92.
Chen Yuchen, Chen Kainan, Zheng Shuxuan, et al.Analytical model and design method of magnetic core for wireless power transfer magnetic coupler[J]. Electrical Engineering, 2022, 23(6): 83-92. |
|
|
|
2025, Vol. 40 
