|
|
|
| The Influence on Characteristics Parameters for White-LED with Current |
| Fang Jinglu1,2, 3, Niu Pingjuan1,2, 3, Tian Huijuan1,2, 3 |
1. School of Electronics and Information Engineering Tianjin Polytechnic University Tianjin 300387 China
2. Key Laboratory of Advanced Electrical Engineering and Energy Technology Tianjin Polytechnic University Tianjin 300387 China
3. Engineering Research Center of High Power Solid State Lighting Application System Ministry Education Tianjin 300387 China |
|
|
|
|
Abstract Light-emitting diodes (LEDs) are a kind of Electroluminescent Devices, characteristics parameters have a close relationship with the current. This paper mainly talks about in the two kinds of current power supply, continuous current supply and PWM pulse current supply, the effects of current on characteristics parameters of white LEDs, such as luminous flux, spectra, domain wavelength, peak wavelength, correlation color temperature and color coordinate. Through experimental test and data analysis, some conclusions was obtained that for continuous current supply, the injection current has the greatest impact on LED the luminous flux and correlation color temperature, almost linear relationship, and has a little effects on spectra, domain wavelength, color coordinate and peak wavelength. For PWM pulsed current supply, the change trend of all characteristic parameters are similar to continuous current supply, but better and more stable than continuous current supply. The results can guide the choice of current power supply mode to use and help towards the application of LED in domestic light.
|
|
Received: 13 May 2013
Published: 22 May 2014
|
|
|
|
|
|
[1]Organisation for Economic Co-operation and Development- International Energy Agency (OECD/ IEA). Light’s Labour’s Lost: Policies for Energy-efficient Lighting[M]. Paris: IEA, 2006: 2-20.
[2]李君飞, 夏鼎智, 李军, 等. 电流对功率型白光LED光学参数的影响[J]. 灯与照明, 2009, 33（2）: 37-39. Li Junfei?, Xia Dingzhi, Li Jun, et al.The Influence on Optical Parameters for Power White-LED with Current[J]. Light & Lighting, 2009, 33(2): 37-39.
[3]崔德胜, 郭伟玲, 崔碧峰, 等.注入电流对GaN基LED发光特性的影响[J]. 光电子. 激光, 2011, 22（9）: 1309-1312. Cui Desheng, Guo Weiling, Cui Bifeng, et al. Effects of injection current on optical characteristics of GaN based power LED[J]. Journal of Optoelectronics Laser, 2011, 22(9):1309-1312.
[4]Pousse N, Rougie B, Razet A. Impact of current supply on LED colour[J]. Lighting Research and Technology, 2010(2): 371-383.
[5]周志敏, 纪爱华. 照明与工程设计[M]. 北京: 人民邮电出版社, 2010: 4-5.
[6]Yam F K, Hassan Z. Innovative Advances in LED Technology[ J] . Microelectronics Journal, 2005 (36): 129-137.
[7]金伟其, 胡威捷. 辐射度、光度与色度及其测量[M].北京: 北京理工大学出版社, 2011: 41-42.
[8]Badgutdino V M L, Korobov E V, Lukpyano V F A, et al. Luminescence spectra, efficiency, and color characteristics of white-light-emitting diodes based on p-n InGaN/GaN hetero structurs with phosphor coatings[J]. Semiconductors, 2006, 40(6): 739-744.
[9]罗毅, 郭文平, 邵嘉平, 等. GaN 基蓝光发光二极管的波长稳定性研究[J]. 物理学报, 2004, 53(8): 2720-2723. Luo Yi, Guo Wenping, Shao Jia Ping, et al. A study on wavelength stability of GaN-based blue light emitting diodes[J]. Acta Physica Sinica, 2004, 53(8): 2720-2723.
[10]林卫国. LED光谱电性能参数测试技术的研究与发展[D]. 武汉: 武汉理工大学, 2006: 11-12. |
|
|
|
2013, Vol. 28 
