Abstract:For the measurable electromagnetic interference, supported by experimental data and based on the system identification, a new modeling approach for the interference of electronic devices is presented. It solves the contradiction between model's complexity and accuracy, which exists in the traditional process of modeling the internal circuits of electronic devices. The parameters of filter with designed structure can be optimized by this new model with tolerant error range, and the parasitic parameters of electronic components can be considered at the same time. Therefore this modeling method makes up the drawbacks of the previous electromagnetic susceptibility (EMS) analysis and filter design mainly relies on substantial experiments but lacks system simulation analysis.
张爱民, 张杭, 陈德桂, 李劲君. 基于系统辨识的电子设备建模及其应用[J]. 电工技术学报, 2009, 24(8): 1-5.
Zhang Aimin, Zhang Hang, Cheng Degui, Li Jinjun. Modeling With System Identification for Electronic Devices and Its Application. Transactions of China Electrotechnical Society, 2009, 24(8): 1-5.
[1] Achar R, Nakhla M. Simulation of high-speed interconnects[J]. Proceedings of the IEEE, 2001, 89(5): 693-727. [2] Jaekel B W. Electromagnetic compatibility of distribution switchgear installations[C]. IEE Conference Publication No. 459, Trends in Distribution Switchgear, 1998:51-57. [3] Yuan Weiliang, Li Erping. A systematic coupled approach for electromagnetic susceptibility analysis of a shielded device with multilayer circuitry[J]. IEEE Transactions on Electromagnetic Compatibility, 2005, 47(4):692-699. [4] Paul C. A SPICE model for multiconductor transmission lines excited by an incident electromagnetic field[J]. IEEE Transactions on Electromagnetic Compatibility, 1994, 36(4):342-354. [5] Xiao Ying, Li Erping. An efficient finite element solution using a congruent transformation based model order reduction for interconnect simulation[C]. IEEE International Symposium on Electromagnetic Compatibility, 2003, 2:749-752. [6] Achar R, Gunupudi P K, Nakhla M, et al. Passive interconnect reduction algorithm for distributed/measured networks[J]. IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, 2000, 47(4):287-301. [7] Elzinga M, Virga K L, Prince J L. Improved global rational approximation macromodeling [8] Erdin I, Nakhla M S, Achar R. Circuit analysis of electromagnetic radiation and field coupling effects for networks with embedded full-wave modules[J]. IEEE Transactions on Electromagnetic Compatibility, 2000, 42(4): 449-460. [9] Li Erping, Liu Enxiao. A coupled efficient and systematic full-wave time-domain macromodeling and circuit simulation method for signal integrity analysis of high-speed interconnects[J]. IEEE Transactions on Advanced Packaging, 2004, 27(1): 213-223. [10] Neumayer R, Haslinger F, Stelzer A, et al. Synthesis of SPICE-compatible broadband electrical models from n-port scattering parameter data[C].2002 IEEE International Symposium on Electromagnetic Compatibility, 2002, 1: 469 -474. [11] Mohana Rao M, Thomas M J, Singh B P. Computation of EMI fields in a high voltage gas insulated substation during switching operations[C]. 2003 IEEE International Symposium, Electromagnetic Compatibility, 2003, 2: 743-748.