Abstract：Due to the high speed and high frequency of the winding current for the high speed machines, the core and copper losses of stator, eddy current loss and air friction loss of the rotor per unit volume will be much more compared to the normal speed machine. At the same time, because of the power density increasing and the total dissipation area decreasing, the effective dissipation and cooling mode are significant to the high speed machine design. In this paper, the basic electrical loss, the high frequency additional loss and the air friction loss on the rotor surface are analyzed based on the finite element and 3D fluid field analysis. Taking a high speed permanent magnet (PM) machine with rated speed of 60000r/min as an example, the calculation and experimental methods of losses are studied. The temperature field of the high speed PM machine is calculated by using the fluid-solid coupling method. The validity of the temperature field calculation method is confirmed through the comparison of the calculated value with the tested result of the high speed PM machine.
孔晓光, 王凤翔, 邢军强. 高速永磁电机的损耗计算与温度场分析[J]. 电工技术学报, 2012, 27(9): 166-173.
Kong Xiaoguang, Wang Fengxiang, Xing Junqiang. Losses Calculation and Temperature Field Analysis of High Speed Permanent Magnet Machines. Transactions of China Electrotechnical Society, 2012, 27(9): 166-173.
[1] 王凤翔. 高速电机的设计特点及相关技术研究[J]. 沈阳工业大学学报, 2006, 28(3): 202-205. Wang Fengxiang. Study on design feature and related technology of high speed electrical machines[J]. Journal of Shenyang University of Technology, 2006, 28(3): 202-205. [2] Wang Fengxiang, Zong Ming, Zheng Wenpeng, et a1. Design features of high speed PM machines[C]. The 6th International Conference on Electrical Machines and Systems (ICEMS 2003), Beijing, China, 2003: 65-70. [3] 王继强, 王凤翔. 高速永磁发电机的设计与电磁性能分析[J]. 中国电机工程学报, 2008, 28(20): 105-110. Wang Jiqiang, Wang Fengxiang. Design and analysis of electromagnetic properties for high speed PM generator[J]. Proceedings of the CSEE, 2008, 28 (20): 105-110. [4] Graf E, Tripodi E, Kolesar S, et al. Segregation of windage and core losses for high speed / frequency, permanent magnet machines[C]. Electric Machines Technology Symposium(EMTS), Philadelphia, USA, 2008. [5] Aglen O, Andersson A. Thermal analysis of a high speed generator[C]. Conference Record of IEEE-IAS, 2003, 1: 547-554. [6] Saari J. Thermal analysis of high-speed induction machines[D]. Helsinki: the Finnish Academy of Technology, 1998. [7] 吴新振, 王祥珩. 异步电机双笼转子导条集肤效应的计算[J]. 中国电机工程学报, 2003, 23(3): 116-120. Wu Xinzhen, Wang Xiangheng. Calculation of skin effect for double-cage rotor bar of the induction machine[J]. Proceedings of the CSEE, 2003, 23(3): 116-120. [8] Aglen O. Loss calculation and thermal analysis of a high-speed Generator[C]. Proceedings of International Electric Machines and Drives Conference, 2003: 1117-1125. [9] 孔晓光, 王凤翔, 邢军强.高速永磁电机绕组高频附加损耗研究[J]. 大电机技术, 2011(7): 13-16. [10] Boglietti A, Lazzari M. A simplified method for the iron losses prediction in soft magnetic materials with arbitrary voltage supply[C]. Conference Record of IEEE-IAS, Piscataway, USA, 2000: 269-276. [11] Co Huynh, Zheng Liping, Dipjyoti Acharya. Losses in high speed permanent magnet machines used in micro turbine applications[J]. Journal of Engineering for Gas Turbines and Power, 2009, 131(2): 022301-1- 022301-6. [12] Kolondzovski Z.Thermal and mechanical analysis analyses of high speed permanent magnet electrical machines[D]. Finland: Aalto University, 2010. [13] Aglen O, Andersson A. Therrmal analysis of a high speed generator[C]. IEEE 38th IAS Annual Meeting on Industry Applications, Salt, Lake, USA, 2003: 547-554. [14] 徐永向, 胡建辉, 胡任之, 等. 永磁同步电机转子涡流损耗计算的实验验证方法[J]. 电工技术学报, 2007, 22(7): 150-154. Xu Yongxiang, Hu jianhui, Hu Renzhi, et al. An experimental verification method of calculation for rotor eddy current losses in PMSMs[J]. Transactions of China Electrotechnical Sosiety, 2007, 22(7): 150-154. [15] 徐永向, 胡建辉, 邹继斌. 表贴式永磁同步电机转子涡流损耗解析计算[J]. 电机与控制学报, 2009, 13 (1): 63-66. Xu Yongxiang, Hu Jianhui, Zou Jibin. Analytical calculation of rotor eddy current losses of surface- mounted PMSM[J]. Electric Machines and Control, 2009, 13, (1): 63-66. [16] 孔晓光, 王凤翔, 徐云龙, 等. 高速永磁电机铁耗的分析与计算[J]. 电机与控制学报, 2010, 14(9): 26-30. Kong Xiaoguang, Wang Fengxiang, Xu Yunlong, et al. Analysis and calculation of iron losses of high-speed permanent magnet machines[J]. Electric Machines and Control, 2010, 14(9): 26-30. [17] 邢军强, 王凤翔, 张殿海, 等. 高速永磁电机转子空气摩擦损耗研究[J].中国电机工程学报, 2010, 30(27): 14-19. Xing Junqiang, Wang Fengxiang, Kong Xiaoguang, et al.Research on motor air friction loss of high-speed permanent magnet machines[J]. Proceedings of the CSEE, 2010, 30(27): 14-19. [18] Shanel M, Pickering S J, Lampard D, et al. Application of computational fluid dynamics to the cooling of salient pole electrical machines[C]. Proceedings of International Conference on Electrical Machines and Systems, 2000: 338-342. [19] 李伟力, 丁树业, 靳慧勇. 基于耦合场的大型同步发电机定子温度场的数值计算[J]. 中国电机工程学报, 2005, 25(13): 129-134. Li Weili, Ding Shuye, Jin Huiyong. Numerical calculation of large synchronous generator stator temperature fields based on coupled fields[J]. Proceeding of the CSEE, 2005, 25(13): 129-139. [20] 姚若萍, 饶芳权. 蒸发冷却水轮发电机定子温度场研究[J] .中国电机工程学报, 2003, 23(6): 87-90. Yao Ruoping, Rao Fangquan. Research on stator thermal field of evaporation cooling hydro- generator[J]. Proceedings of the CSEE, 2003, 23(6): 87-90. [21] 栾茹, 傅德平, 唐龙尧. 新型浸润式蒸发冷却电机定子三维温度场的研究[J]. 中国电机工程学报, 2004, 24(8): 205-209. Luan Ru, Fu Deping, Tang Longyao. Study on temperture distribution in new evaporative cooling asynchronous generator[J]. Proceedings of the CSEE, 2004, 24(8): 205-209. [22] Rajaopal M S, Seetharamu K N. Finite element analysis of radial cooled rotating electrical machines [J]. International Journal of Numerical Methods for Heat & Fluid Flow, 1999, 9(1): 18-38.
2012, Vol. 27 
