PWM激励下异步电机铁耗等值电阻模型

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (564 KB)
输出: BibTeX | EndNote (RIS)

摘要通过分析PWM激励下异步电机铁耗变化的特点, 提出了一种综合考虑电机运行工况和PWM波形特性的铁耗等值电阻模型。基于铁耗分离原理, 使用三个电阻分别等效电机铁耗的磁滞分量、经典涡流分量和异常涡流分量, 并推导了正弦激励下各个电阻分量的表达式;进而通过分析PWM激励与正弦激励下铁耗间关系, 对正弦激励下铁耗模型进行修正, 获得PWM激励下铁耗模型;最后提出了确定该模型参数的实验方案。所建模型中各个电阻分量随电机运行频率和PWM波形的调制系数变化而变化, 且变化规律各不相同, 提高了电机铁耗计算的准确性。仿真和实验验证了该模型的正确性和有效性。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	罗富强
	夏长亮
	乔照威
	王慧敏
	宋战锋

关键词 ：铁耗, PWM, 等值电阻, 异步电机, 铁耗分离模型

Abstract：Model of equivalent iron loss resistance of induction motor(IM) fed by PWM is established which could consider the motor’s operation condition and PWM waveform property by analyzing characteristic of iron loss variation. Based on iron loss separation model, three resistances are used to represent each component of the total iron loss which consists of hysteresis, classical loss and excess loss and then the expressions for these resistance under sinusoidal excitation are deduced. These expressions are modified by analyzing relationship of iron loss of IM under sinusoidal and PWM excitation, and then the model of iron loss resistance under PWM excitation is built. An experiment scheme is proposed to determining the parameters of the model. Each resistance in the model varies with the motor’s operating frequency and modulation index of PWM waveform in different manners, and calculation accuracy of iron loss is improved. Correctness and validity of the proposed model is verified by the simulation and the experiment results.

Key words： Iron loss PWM equivalent resistance induction motor iron loss separation model

收稿日期: 2011-07-19 出版日期: 2014-03-20

PACS:

TM343

基金资助:国家杰出青年科学基金(50825701), 国家自然科学基金 (51037004)和天津市科技支撑计划(10ZCKFGX02300, 11ZCKFGX03300) 重点资助项目。

作者简介: 罗富强男, 1987年生, 硕士研究生, 研究方向为电机电磁设计。夏长亮男, 1968年生, 博士, 教授, 博士生导师, 研究方向为电机系统及其控制、电力电子与电气传动、风力发电系统运行控制。

引用本文:

罗富强, 夏长亮, 乔照威, 王慧敏, 宋战锋. PWM激励下异步电机铁耗等值电阻模型[J]. 电工技术学报, 2012, 27(7): 101-108. Luo Fuqiang, Xia Changliang, Qiao Zhaowei, Wang Huimin, Song Zhanfeng. Model of Equivalent Iron Loss Resistance of Induction Motor Fed by PWM. Transactions of China Electrotechnical Society, 2012, 27(7): 101-108.

链接本文:

http://dgjsxb.ces-transaction.com/CN/Y2012/V27/I7/101

[1] Bijan Zahedi, Sadegh Vaez Zadeh. Efficiency optimization control of single-phase induction motor drives[J]. IEEE Transactions on Power Electronics, 2009, 24(4): 1062-1071.
[2] Nasir M Uddin, Sang Woo Nam. New online loss-minimization-based control of an induction motor drive[J]. IEEE Transactions on Power Electronics, 2008, 23(2): 926-933.
[3] 崔纳新, 张承慧, 吕志强, 等. 基于电压空间矢量的电动汽车电驱动系统高效快转矩响应控制[J]. 电工技术学报, 2009, 24(3): 61-66.
Cui Naxin, Zhang Chenghui, Lü Zhiqiang, et al. Fast torque response control of high efficiency drives in electric vehicles based on voltage space vector[J]. Transactions of China Electrotechnical Society, 2009, 24(3): 61-66.
[4] Kirschen D S, Novotny D W, Suwanwisoot W. Minimizing induction motor losses by excitation control in variable frequency drives[J]. IEEE Transactions on Industry Applications, 1984, IA-20(5): 1244-1250.
[5] Jian T, Schmitz N, Novotny D. Characteristic induction motor slip values for variable voltage part load performances optimization[J]. IEEE Transactions on Power Apparatus and Systems, 1983, PAS-102(1): 38-46.
[6] Boglietti A, Ferraris P, Lazzari M, et al. Influence of modulation techniques on iron losses with single phase DC/AC converters[J]. IEEE Transactions on Magnetics, 1996, 32(5): 4884-4886.
[7] Boglietti A, Cavagnino A, Lazzari M, et al. Predicting iron losses in soft magnetic materials with arbitrary voltage supply: an engineering approach[J]. IEEE Transactions on Magnetics, 2003, 39(2): 981-989.
[8] 王建渊, 安少亮, 李洁, 等. 考虑主磁路饱和与铁损的异步电机模型[J]. 电工技术学报, 2010, 25(10): 44-50.
Wang Jianyuan, An Shaoliang, Li Jie, et al. Modeling of induction motor considering main flux saturation and iron loss[J]. Transactions of China Electrotechnical Society, 2010, 25(10): 44-50.
[9] Moulahoum S, Touhami O. An approach to an induction machine modeling in presence of saturation and iron loss[C]. IEEE Power Engineering Society General Meeting, 2005: 2272-2276.
[10] Emil Levi, et al. Iron loss in rotor-flux-oriented induction machines: identification, assessment of detuning, and compensation[J]. IEEE Transactions on Power Electronics, 1996, 11(5): 698-709.
[11] Bertotti G. General properties of power losses in soft ferromagnetic materials[J]. IEEE Transactions on magnetic, 1988, 24(1): 621-630.
[12] Buecherl D, Herzog H. Iron loss modeling by complex inductances for steady state simulation of electrical machines[C]. International Symposium on Power Electronics Electrical Drives Automation and Motion (SPEEDAM), 2010: 878-883.
[13] Hui S Y R, Zhu J. Numerical modelling and simulation of hysteresis effects in magnetic cores using transmission-line modelling and the Preisach theory[J]. IEE Proceedings Electric Power Applications, 1995, 142(1): 57-62.
[14] Hui S Y R, Zhu J G, Ramsden V S. A generalized dynamic circuit model of magnetic cores for low- and high-frequency applications II. circuit model formulation and implementation[J]. IEEE Transactions on Power Electronics, 1996, 11(2): 251-259.
[15] Amar M, Kaczmarek R. A general formula for prediction of iron losses under nonsinusoidal voltage waveform[J]. IEEE Transactions on Magnetics, 1995, 31(5): 2504-2509.
[16] Gmyrek Z, Boglietti A, Cavagnino A. Estimation of iron losses in induction motors: calculation method, results and analysis[J]. IEEE Transactions on Industrial Electronics, 2010, 57(1): 161-171.
[17] Boglietti A, Cavagnino A, Ferraris L, et al. Induction motor equivalent circuit including the stray load losses in the machine power balance[J]. IEEE Transactions on Energy Conversion, 2008, 23(3): 796-803.