|
|
|
| Chain Equivalent Circuit Model of Wound-Rotor Brushless Doubly-Fed Machine |
| Xiong Fei, Wang Xuefan, Zhang Jingwei, Kan Chaohao |
| Huazhong University of Science and Technology Wuhan 430074 China |
|
|
|
|
Abstract Building the accurate equivalent circuit model of the brushless doubly-fed machine (BDFM) and analyzing the harmonic effect on the performance of the machine is the purpose of this paper. Based on the basic electromagnetic relation and the fundamental equivalent circuit for BDFM, the harmonic equivalent circuit is presented and the chain equivalent circuit model of BDFM considering the effect of the harmonic content is built in this paper. The calculating formulas of the parameters and the state equation in the chain equivalent circuit model are given. As an example, the mechanical characteristic of a practical wound-rotor BDFM is calculated by the chain equivalent circuit model and compared with the calculated results of the fundamental equivalent circuit model and the measured results. The proposed equivalent circuit model and the calculation methods are valid by the comparison of the measured and calculated results of the prototype machine.
|
|
Received: 26 February 2009
Published: 12 December 2014
|
|
|
|
|
|
[1] Williamson S, Ferreira A C, Wallace A K. Generalized theory of the brushless doubly-fed machine Part1: analysis[J]. IEE Proceedings on Electric Power Applications, 1997, 144(2): 111-122.
[2] McMahon R A, Roberts P C, Wang X, et al. Performance of BDFM as generator and motor[J]. IEE Proceedings on Electric Power Applications, 2006, 153(2): 289-299.
[3] 王雪帆. 一种转子绕组采用变极法设计的新型无刷双馈电机[J]. 中国电机工程学报, 2003, 23(6): 108-127.
[4] Roberts P C, Mc Mahon R A, Tavner P J, et al. Performance of rotors for the brushless doubly-fed (induction) machine (BDFM) [C]. The 16th International Conference on Electrical Machines, Cracow, Poland, 2004 (1): 450-455.
[5] Wallace A K, Spée R, Lauw H K. The potential of brushless doubly-fed machine for adjusting speed drives[J]. IEEE Transactions on Industry Applications, 1980, 6(1): 45-50.
[6] Alexander G C. Characterization of the brushless, doubly-fed machine by magnetic field analysis[C]. IEEE Industrial Applications Society Annual Meeting, Seattle, USA, 1990 (1): 67-74.
[7] Rochelle P, Spée R, Wallace A K. The effect of stator winding configuration on the performance of brushless doubly-fed machines in adjustable speed drives[C]. IEEE Industrial Applications Society Annual Meeting, Seattle, USA, 1990, 1: 331-337.
[8] 杨顺昌, 徐昌彪. 无刷双馈电机的稳态转矩-角特性[J]. 电工技术学报, 1998, 13(8): 15-18.
[9] 杨顺昌, 廖勇, 青云.无刷双馈调速电机开环下的性能研究[J]. 电工技术学报, 1999, 14(2): 27-30.
[10] 邓先明, 姜建国, 方荣惠. 笼型转子无刷双馈电机的电磁分析和等效电路[J]. 电工技术学报, 2005, 20(8): 19-23.
[11] Li R, Wallace A, Spée R. Two-axis model development of cage-rotor brushless doubly-fed machines[J]. IEEE Transactions on Energy Conversion, 1991, 6(3): 453- 460.
[12] Li R, Wallace A, Spée R, et al. Dynamic simulation of brushless doubly-fed machines[J]. IEEE Transactions on Energy Conversion, 1991, 6(3): 445-452.
[13] Roberts P C, Mc Mahon R A, Tavner P J, et al. Equivalent circuit for the brushless doubly fed machine(BDFM) including parameter estimation and experimental verification[J]. IEE Proceedings on Electric Power Applications, 2005, 152(4): 933-942.
[14] Wang X, Roberts P C, Mc Mahon R A. Optimization of BDFM stator design using an equivalent circuit model and a search method[C]. The 3rd IET International Conference on Power Electronics, Machines and Drives, Dublin, Ireland, 2006, 1: 606- 610.
[15] Williamson S, Smith A C. Equivalent circuits for cage induction motors with inter-bar currents[J]. IEE B on Electric Power Applications, 2002, 149(3): 173-184. |
|
|
|
2010, Vol. 25 
