滑动电接触磨损过程变化的实验研究

Abstract
Figure/Table
References
Related Citation (14)

Download: PDF (960 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In this paper, a lot of experiments are carried out by using the high-performance sliding electric contact testing instrument, regarding the Cu impregnation carbon material and Cu-Sn wire as a friction pairs. A group of friction coefficient curves as turbulence are obtained, thereby two stages in the current-carrying friction process of sliding plates are proposed; they are running-in stage and relative stable stage. In connection with the problem of plate’s heavy abrasion loss at the running-in stage, some conclusions are derived, if increase the pressure properly and elevate the sliding velocity, it will shorten the total time of the running-in time , so as to reduce the wear of the first stage and improve the current quality. At last the author analyzed the worn surface of Cu impregnation carbon material at the first period and the relative stable period by using the SSX-550. And found that the macroscopic arc corrosion and the abrasive wear are the main styles of friction and wear at first stage, the microcosmic arc corrosion and the adhesive wear are the main styles at the relative stable period.

Key words： Electric contact wear running-in stage relative stable stage wear rate macroscopic arc corrosion microcosmic arc corrosion

Received: 27 October 2009 Published: 04 March 2014

PACS:

TM244

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Guo Fengyi
	Ren Zhiling
	Ma Tongli
	Zhao Rubin
	Chen Zhonghua
	Wang Zhiyong

Cite this article:

Guo Fengyi,Ren Zhiling,Ma Tongli等. Experimental Research on Wear Process Variability ofthe Sliding Electric Contact[J]. Transactions of China Electrotechnical Society, 2010, 25(10): 24-29.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2010/V25/I10/24

[1] 郭凤仪, 陈忠华．电接触理论及其应用技术[M]．北京：中国电力出版社, 2008.
[2] Kie Bling, Puschmann, Schmieder．电气化铁道接触网[M].北京：中国电力出版社, 2004.
[3] 罗君, 马永强．弓网接触力检测的仿真研究[D]．成都：西南交通大学, 2006.
[4] 张卫华．准高速接触网动态性能的研究[J]．西南交通大学学报, 1997, 32(2): 187-192.
Zhang Weihua. On dynamic behavior of the quasi high speed catenary[J]. Journal of Southwest Jiaotong University, 1997, 32(2): 187-192.
[5] 郭凤仪, 马同立, 陈忠华, 等. 不同载流条件下滑动电接触特性的实验研究[J]. 电工技术学报, 2009, 24(12): 1-6.
[6] Kim Wansik, Wang Q Jane, Liu S, et al. Simulation of steady and unsteady state surface temperatures under sliding imperfect electrical contact between rough surfaces[C]. The 23th International Conference on Electrical Contact, Sendai, Japan, 2006: 226-231.
[7] Jonathan Swingler, Noureddine Benjemaa. Correlation between wear and electrical behavior of contact interfaces during fretting vibration[C]. The 23th International Conference on Electrical Contact, Sendai, Japan, 2006: 215-219.
[8] 冀盛亚, 孙乐民, 上官宝, 等．表面粗糙度对黄铜/铬青铜摩擦副载流摩擦磨损性能影响的研究[J]．润滑与密封, 2009, 34(1): 29-31.
Ji Shengya, Sun Lemin, Shangguan Bao et al. Tribological characteristics of H68 / QCr0.5 rubbing pairs under electric current with different surface roughness[J]. Lubrication Engineering, 2009, 34(1): 29-31.
[9] Eugeniusz Walczuk, Piotr Borkowski, Krystyna Frydman, et al. Migration of composite contact materials components at high current arcing[C]. The 23th International Conference on Electrical Contact, Sendai, Japan, 2006: 143-149.
[10] Neufeid C N, Rieder W F. Influence of organic vapors on contact reliability[C]. 17th International Conference of Electric Contact, Nagoya, Japan, 1994: 121-124.
[11] 荣命哲, 娄建勇, 王小华．永磁式接触器动触头动作特性仿真分析与试验研究[J]．中国电机工程学报, 2005, 25(1): 109-113.
Rong Mingzhe, Lou Jianyong, Wang Xiaohua. Simulation analysis and experimental research of operating characteristic for moving contact of contactor with permanent magnet actuator[J]. Proceedings of the CSEE, 2005, 25(1): 109-113.
[12] 翟国富, 孙韬, 任万滨．继电器触点分断过程瞬态热场仿真方法[J]．中国电机工程学报, 2009, 29(9): 118-123.
Zhai Guofu, Sun Tao, Ren Wanbin. Transient thermal field simulation method of relay contacts breaking process[J]. Proceedings of the CSEE, 2009, 29(9): 118-123.
[13] Chen Zhuanke, Sawa K. The investigation of surface characteristics and contact resistance of DC relay contacts[J]. IEEE Trans. on Components, Packaging and Manufacturing Technology, 1993, 16(2): 211-219.