混合叠压圆筒型永磁直线振荡电机电磁特性分析

doi:10.19595/j.cnki.1000-6753.tces.230979

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (8730 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Tubular permanent magnet linear oscillating actuators (TPMLOA) have widely used in the application field of short-stroke and high frequency linear reciprocating, because of simple mechanical structure, without the rotary-to-linear conversion, low maintenance costs and fast dynamic response. However, the tubular structure and the special distribution of magnetic circuit pose significant challenges to the assembly of silicon steel sheets. The traditional assembly method is to laminate the silicon steel sheets in a circumferential direction, which leads to a low stacking coefficient of the silicon steel sheet of stator and can easily cause magnetic circuit saturation. At present, scholars have proposed some ways to increase the stacking coefficient and improve the performance of the TPMLOA, but these methods also increase the assembly difficulty and processing cost. Therefore, this paper proposes a hybrid lamination method to solve the above problems. The combination of silicon steel sheets and electrical iron materials can effectively reduce the assembly difficulty and increase stacking coefficient.
Firstly, the basic structure of a C-core double stator TPMLOA with three permanent magnets is introduced, and the magnetic circuit distribution and the operating principle of the motor at different positions is given. Secondly, the implementation method and related parameter determination of the hybrid lamination scheme proposed in this article is explained and derived, and the upper limit of the number of slots for electrical iron is determined. Thirdly, the influence of different quantities of silicon steel sheets in each slot on the electromagnetic performance of TPMLOA is compared and analyzed, and the optimal number of slots for electrical iron materials is determined. Finally, through three-dimensional finite element analysis (3D-FEA) and prototype experiments, the advantages of using a hybrid lamination TPMLOA in reducing magnetic circuit saturation and improving electromagnetic thrust capacity are verified.
By analyzing the impact of different numbers of silicon steel sheets in each slot on the performance of the TPMLOA, it can be concluded that as the number of silicon steel sheets in each slot increases, the amplitude of the back electromotive force (EMF) and electromagnetic thrust of the TPMLOA gradually decreases, while the iron core loss and eddy current loss also increase. Therefore, when the number of silicon steel sheets in each slot is 1, it is more conducive to improving the performance of the motor. The 3D-FEA results show that when the armature current is 20 A, compared to the traditional TPMLOA in a magnetic circuit saturation state, the magnetic field density of the stator in the hybrid lamination TPMLOA is only about 1.6T. Although the electromagnetic thrust of the two lamination methods is the same at the center position, the electromagnetic thrust of the hybrid lamination TPMLOA at the maximum position of 10 mm is 221 N, which is 26% higher than that of traditional TPMLOA. However, the effect of hybrid lamination method on the eddy current loss of the motor cannot be ignored. When the operating frequency is 40 Hz and the armature current is 20 A, the total core loss of the hybrid lamination TPMLOA is 13.8 W, which is greater than the 11.38 W of traditional TPMLOA. The comparison between prototype experiments and the simulation analysis shows that the electromagnetic thrust of the actual prototype is 7% smaller than that of the 3D-FEA, and the amplitude of the actual test back EMF is also smaller than the simulation results. Finally, load test is conducted on the prototype, and the resonance frequency of the surface linear oscillation motor is 52 Hz, and the efficiency of the TPMLOA reaches a maximum of 84.5%.
Through comparative analysis, the following conclusions can be drawn: (1) Compared with traditional lamination method, the hybrid lamination method proposed in this paper can effectively improve the saturation of the magnetic circuit and increase the electromagnetic thrust at the maximum position. (2) The hybrid lamination method causes an increase in eddy current loss, which reduces efficiency of the TPMLOA. Therefore, a block-based approach should be adopted to reduce eddy current loss. (3) TPMLOA has the highest efficiency at resonance frequency.

Key words： Permanent magnet linear oscillation actuator hybrid lamination tubular structure finite element analysis electromagnetic performance

Received: 25 June 2023

PACS:

TM359.4

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhang Hongbin
	Xu Zhike
	Jin Long
	Shen Zhan

Cite this article:

Zhang Hongbin,Xu Zhike,Jin Long等. Electromagnetic Characteristics Analysis of Tubular Permanent Magnet Linear Oscillation Actuator with Hybrid Lamination[J]. Transactions of China Electrotechnical Society, 2023, 38(19): 5090-5100.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.230979 OR https://dgjsxb.ces-transaction.com/EN/Y2023/V38/I19/5090

[1] Chen X, Zhu Z Q, Howe D.Modeling and analysis of a tubular oscillating permanent-magnet actuator[J]. IEEE Transactions on Industry Applications, 2009, 45(6): 1961-1970.
[2] 柴嘉伟, 贵献国. 音圈电机结构优化及应用综述[J].电工技术学报, 2021, 36(6): 1113-1125.
Chai Jiawei, Gui Xianguo.Overview of structure optimization and application of voice coil motor[J]. Transactions of China Electrotechnical Society, 2021, 36(6): 1113-1125.
[3] Kim W H, Kim C W, Shin H S, et al.Optimal design of short-stroke linear oscillating actuator for minimization of side force using response surface methodology[J]. IEEE Transactions on Magnetics, 2022, 58(2): 1-5.
[4] 徐伟, 李想, 廖凯举, 等. 直线振荡电机拓扑结构及应用综述[J]. 电工技术学报, 2022, 37(21): 5377-5401.
Xu Wei, Li Xiang, Liao Kaiju, et al.Overview of linear oscillatory machines: topology and application[J]. Transactions of China Electrotechnical Society, 2022, 37(21): 5377-5401.
[5] Wang J, Howe D, Lin Z.Analysis of a short-stroke, single-phase, quasi-Halbach magnetised tubular permanent magnet motor for linear compressor applications[J]. IET Electric Power Applications, 2008, 2(3): 193-200.
[6] 徐衍亮, 崔波, 张文晶, 等. 软磁复合材料-Si钢组合铁心盘式横向磁通永磁无刷电机[J]. 电工技术学报, 2020, 35(5): 983-990.
Xu Yanliang, Cui Bo, Zhang Wenjing, et al.Disk transverse flux permanent magnet brushless motor based on soft magnetic composite-Si steel core[J]. Transactions of China Electrotechnical Society, 2020, 35(5): 983-990.
[7] Wang Jiabin, Howe D, Lin Zhengyu.Design optimization of short-stroke single-phase tubular permanent-magnet motor for refrigeration applications[J]. IEEE Transactions on Industrial Electronics, 2010, 57(1): 327-334.
[8] 赵国新, 孔德财, 高晓林. 软磁复合材料与硅钢片材料的永磁电机性能差异研究[J]. 电工技术学报, 2018, 33(增刊1): 75-81.
Zhao Guoxin, Kong Decai, Gao Xiaolin.Performance difference study on permanent magnet synchronous motor based on soft magnetic composite material and silicon steel sheet[J]. Transactions of China Electrotechnical Society, 2018, 33(S1): 75-81.
[9] 夏永明, 卢琴芬, 叶云岳, 等. 新型双定子横向磁通直线振荡电机[J]. 中国电机工程学报, 2007, 27(27): 104-107.
Xia Yongming, Lu Qinfen, Ye Yunyue, et al.Novel flux reversal linear oscillatory motor with two divided stators[J]. Proceedings of the CSEE, 2007, 27(27): 104-107.
[10] 李想, 徐伟, 叶才勇. 新型定子永磁型动铁心式横向磁通直线振荡电机[J]. 中国电机工程学报, 2017, 37(21): 6209-6217.
Li Xiang, Xu Wei, Ye Caiyong.Novel stator-magnet moving-iron transversal-flux linear oscillatory machine[J]. Proceedings of the CSEE, 2017, 37(21): 6209-6217.
[11] Kim K H, Park H I, Jeong S S, et al.Comparison of characteristics of permanent-magnet linear oscillating actuator according to laminated method of stator core[J]. IEEE Transactions on Applied Superconductivity, 2016, 26(4): 1-4.
[12] 施振川. 圆筒型直线振荡电机关键问题研究[D]. 南京: 东南大学, 2018.
[13] 卢琴芬, 谢舸, 金勇等. 混合铁心横向磁通永磁电机的设计与分析[J] .中国电机工程学报, 2011, 31(9): 66-70.
Lu Qinfen, Xie Ge, Jin Yong, et al.Design and analysis of a transverse-flux permanent magnet motor with hybrid iron-core[J]. Proceedings of the CSEE, 2011, 31(9): 66-70.
[14] Wang S P, Liu C C, Wang Y H, et al.Electromagnetic performance analysis of flux-switching permanent magnet tubular machine with hybrid cores[J]. CES Transactions on Electrical Machines and Systems, 2020, 4(1): 43-52.
[15] 张春雷, 张辉, 叶佩青. 高霍尔位置检测精度的圆筒型永磁同步直线电机设计[J]. 电工技术学报, 2022, 37(10): 2481-2490.
Zhang Chunlei, Zhang Hui, Ye Peiqing.Design of tubular permanent magnet synchronous linear motor by reliability-based robust design optimization[J]. Transactions of China Electrotechnical Society, 2022, 37(10): 2481-2490.
[16] 许孝卓, 封海潮, 艾立旺等. U型永磁凸极直线电机结构及电磁特性[J]. 电工技术学报, 2021, 36(6): 1179-1189.
Xu Xiaozhuo, Feng Haichao, Ai Liwang, et al.Structure and electromagnetic characteristics of U-shaped permanent magnet salient pole linear motor[J]. Transactions of China Electrotechnical Society, 2021, 36(6): 1179-1189.
[17] 曹瑞武, 苏恩超, 张学. 轨道交通用次级分段型直线磁通切换永磁电机研究[J]. 电工技术学报, 2020, 35(5): 1001-1012.
Cao Ruiwu, Su Enchao, Zhang Xue.Investigation of linear flux-switching permanent magnet motor with segmented secondary for rail transit[J]. Transactions of China Electrotechnical Society, 2020, 35(5): 1001-1012.
[18] 张春雷, 张辉, 叶佩青, 等. 两相无槽圆筒型永磁同步直线电机电感计算与分析[J]. 电工技术学报, 2021, 36(6): 1159-1168.
Zhang Chunlei, Zhang Hui, Ye Peiqing, et al.Inductance analysis of two-phase slotless tubular permanent magnet synchronous linear motor[J]. Transactions of China Electrotechnical Society, 2021, 36(6): 1159-1168.
[19] 付东山, 贾泽宇, 吴富强, 等. 新型斜气隙圆筒型横向磁通切换直线电机及其建模分析[J]. 中国电机工程学报, 2022, 42(15): 5706-5718.
Fu Dongshan, Jia Zeyu, Wu Fuqiang, et al.Novel oblique air-gap tubular transverse flux switching permanent magnet linear motors and its modeling analysis[J]. Proceedings of the CSEE, 2022, 42(15): 5706-5718.