无位置传感器无刷直流电动机无反转起动及其平滑切换

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (611 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In this paper, a novel anti-reverse-rotation startup and smoothly switching method for a non-salient pole brushless DC motor (BLDCM) is presented. Using short pulse sensing method based on the saturation effect of the stator iron, the rotor can be located and accelerated. The drawbacks of the “3-stage startup method” are analyzed, and the motor is switched smoothly according to the relationship between the terminal voltage waveform and commutation phases, when all the power devices are turned off. The back EMF zero-crossing point detection is conducted at the end of PWM on-state and the true zero-crossing point is extracted from the proposed algorithm. The experimental results verified the feasibility and validity of the suggested method.

Key words： Brushless DC motor sensorless control starting without reverse rotation back EMF method switch smoothly

Received: 12 September 2008 Published: 18 February 2014

PACS:

TM361+

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zhang Zhiyao
	Lin Mingyao
	Zhou Guqing

Cite this article:

Zhang Zhiyao,Lin Mingyao,Zhou Guqing. Anti-Reverse Rotation Startup and Smoothly Switching of Sensorless Brushless DC Motor[J]. Transactions of China Electrotechnical Society, 2009, 24(11): 26-32.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2009/V24/I11/26

[1] 林明耀, 李强, 杨沛骐. 无位置传感器无刷直流电机转子位置检测误差分析及其补偿[J]. 微特电机 2003, 31(6): 8-12.
[2] 沈建新, 吕晓春, 等. 无传感器无刷直流电机三段式起动技术的深入分析[J]. 微特电机, 1998, 26(5): 8-11.
[3] Lai Yenshin, Shyu Fusan, Tseng Shianshau. New initial position detection technique for three-phase brushless DC motor without position and current sensors[J]. IEEE Transaction on Industry Application, 2003, 39(2): 485-491.
[4] Jang G H, Park J H, Chang J H. Position detection and start-up algorithm of a rotor in a sensorless BLDC motor utilising inductance variation[J]. IEE Proc. Electric Power Application, 2002, 49(2): 137-142.
[5] Lee Wookjin, et al. A new starting method of BLDC motors without position sensor[J]. IEEE Trans. on Industry Application, 2006, 42(6): 1532-1538.
[6] Schmidt P B, Gasperi M L, et al. Initial rotor angle detection of a non-salient pole permanent magnet synchronous machine[C]. IEEE IA Society Annual Meeting, New Orleans, Louisiana, 1997, 1: 459-463.
[7] Chang Yenchuan, Tzou Yingyu. A new sensorless starting method for brushless DC motors without reversing rotation[C]. IEEE Power Electronics Speci- alists Conference, 2007: 619-624.
[8] Uzuka K, Uzuhashi H, et al. Microcomputer control for sensorless brushless motor[J]. IEEE Trans. on Ind. Appl., 1985, 21(4): 595-601.
[9] Chen Chenghu, Cheng Mingyang. A new sensorless commutation drive for brushless DC motor and alternator[C]. IEEE International Symposium on Industrial Electronics, 2006, 3: 2116-2121.
[10] Lin Mingyao, Gu Weigang, et al. Design of position detection circuit for sensorless brushless DC motor drive[C]. IEEE IEMDC2007, 2007, 1: 225-228.
[11] Lai Yenshin, Lin Yongkai. A unified approach to back-EMF detection for brushless DC motor drives without current and hall sensors[C]. IEEE Industrial Electronics Conference, IECON 2006, 2006: 1293- 1298.
[12] Shao Jianwen. An improved microcontroller-based sensorless brushless DC (BLDC) motor driver for automotive applications[C]. IEEE Industry Applications Conference, 2006, 42(5): 1216-1221.
[13] Lai Yenshin, Lin Yongkai. Back-EMF detection technique of brushless DC motor driver for wide range control[C]. IEEE Industrial Electronics Conference, 2006: 1006-1011.