|
|
|
| Key Adjusted Parameters and Optimum Method of Electromagnetic Relay Based on Orthogonal Experimental Design |
| Wang Qiya1, Zhai Guofu1, Cheng Xianke2, Chen Zhijun2 |
| 1. Harbin Institute of Technology Harbin 150001 China 2. G & A Technologies Co., Ltd. Guilin 541002 China |
|
|
|
|
Abstract On the stage of electromagnetic relay's being adjusted, the technical control of adjusted parameters directly affects relays' characteristics of reaction force, and changes the match of attractive force and reaction force. It eventually influences the breaking velocity of relay's contacts. And the change of contacts' breaking velocity has a great effect on relays' electrical lifespan. Taking adjusted parameters (including armature's maximum angular displacement, initial return spring's force, normally closed contacts' force, contacts' gap and normally open contacts' over travel) as factors and breaking velocities as targets, this paper does the orthogonal experimental design of five factors and four levels, analyzes and investigates the key adjusted parameters influencing breaking velocities. The research results indicate that αarm_max, δgap and δNO_contacts are the key factors affecting breaking velocity of NC contacts, δNO_contacts is the key factor affecting breaking velocity of NO contacts. Then, based on the above work, optimum method of adjusted parameters is presented.
|
|
Received: 22 January 2008
Published: 17 February 2014
|
|
|
|
|
|
[1] Jemma N B. Break arc duration and contact erosion in automotive application[J]. IEEE Trans. on C.P.M.T. 1996, 19(1): 82-86.
[2] 王其平. 电器电弧理论[M]. 北京：机械工业出版社, 1991.
[3] 翟国富, 梁慧敏, 等. 基于正交试验设计的极化磁系统参数优化设计方法的研究[J]. 中国电机工程学报, 2003, 23(10): 158-163.
[4] 毕成. 正交试验自动设计的实现及其在继电器优化设计上的应用[J]. 机电元件, 2002, 22 (1): 6-9.
[5] Wu Yingxin, Lin Xiangning, Miao Shihong, et al. Application of family eugenics based evolution algorithms to electric power system fault section estimation[C]. IEEE/PES Transmission and Distribution Conference & Exhibition: Asia and Pacific Dalian, China, 2005: 1-5.
[6] Scibilia B, Kobi A, Chassagnon R, et al. Designed fatigue experiment to improve the reliability of liquid crystal displays[C]. Proceedings Annual Reliability And Mainaniability Symposium, 2000: 234-238.
[7] 王其亚. 航天电磁继电器三维实体模型开发及其动态特性研究[D]. 哈尔滨: 哈尔滨工业大学, 2006.
[8] 韩之俊, 章渭基. 质量工程学——线外、线内质量管理[M]. 北京: 科学出版社, 1991.
[9] 杨茜, 荣命哲, 吴翊, 等. 低压断路器中空气电弧重击穿现象的仿真与实验研究[J]. 中国电机工程学报, 2007, 27(6): 84-88.
[10] 杨茜, 荣命哲, 吴翊.低压断路器中空气电弧运动的仿真及实验研究[J]. 中国电机工程学报, 2006, 26 (15), 89-94. |
|
|
|
2009, Vol. 24 
