双行程螺管式电磁铁动态仿真分析及实验

doi:10.19595/j.cnki.1000-6753.tces.L80334

Abstract
Figure/Table
References
Related Citation (9)

Download: PDF (22378 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The electromagnet uses electromagnetic force to make mechanical work to transform electrical energy into mechanical energy, and the optimization of its structural parameters is very important. In this paper, a modeling method of Ansys Maxwell and ADAMS joint simulation was proposed based on a double stroke solenoid electromagnet. First, the static suction formula was calculated by analytic method, which provided the basis for the design of parameters. Then, the three-dimensional model of the double stroke electromagnet was established in the Maxwell finite element software to get the static characteristics. By coupling voltage balance equation and the Darren Bell motion equation, the dynamic suction displacement curve was obtained with the energy increment method. Thirdly, by constructing the ADAMS mechanical model and introducing the dynamic suction to the model, displacement time curve was simulated. Within 5% error compared with the experimental results, the reliability of the joint simulation between Ansys Maxwell and ADAMS is verified and a new method is proposed for the dynamic analysis and structural parameters optimization of the electromagnet.

Key words： Double stroke solenoid electromagnet analytical method static characteristics operating characteristics

Received: 30 June 2018 Published: 15 February 2019

PACS:

TM574

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Yuan Yang
	Wu Jianwen
	Jiang Yuan
	Li Weixin

Cite this article:

Yuan Yang,Wu Jianwen,Jiang Yuan等. Dynamic Simulation Analysis and Experiment for Double Stroke Solenoid Electromagnet[J]. Transactions of China Electrotechnical Society, 2018, 33(zk2): 453-460.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.L80334 OR https://dgjsxb.ces-transaction.com/EN/Y2018/V33/Izk2/453

[1] 房淑华, 林鹤云, 蔡彬, 等. 永磁接触器合闸过程的动态仿真及实验[J]. 电工技术学报, 2007, 22(2): 45-50.
Fang Shuhua, Lin Heyun, Cai Bin, et al.Dynamic simulation and experiment for making process of permanent magnet contactor[J]. Transactions of China Electrotechnical Society, 2007, 22(2): 45-50.
[2] 娄建勇, 荣命哲, 邹洪超, 等. 单线圈单稳态永磁式接触器机构动力学特性仿真分析[J]. 中国电机工程学报, 2004, 24(4): 120-124.
Lou Jianyong, Rong Mingzhe, Zou Hongchao, et al.Simulation on mechanism dynamic characteriscs of single coil and single stable position contactor with permanent magnet[J]. Proceedings of the CSEE, 2004, 24(4): 120-124.
[3] 夏克鹏, 李岩, 南玉华, 等. 新型电磁推力机构设计与仿真分析[J]. 电气技术, 2009, 10(12): 33-36.
Xia Kepeng, Li Yan, Nan Yuhua, et al.Design and simulation anylysis of novel electromagnetic repulsion mechanism[J]. Electrical Engineering, 2009, 10(12): 33-36.
[4] 何晓燕, 许志红. 交流接触器虚拟样机设计技术[J].电工技术学报, 2016, 31(14): 148-155.
He Xiaoyan, Xu Zhihong.Virtual prototyping technology of AC contactor[J]. Transactions of China Electrotechnical Society, 2016, 31(14): 148-155.
[5] 陈益广, 韩柏然, 沈勇环, 等. 永磁同步推进电机电磁振动分析[J]. 电工技术学报, 2017, 32(23): 16-22.
Chen Yiguang, Han Boran, Shen Yonghuan, et al.Electromagnetic vibration analysis of permanent magnet synchronous propulsion motor[J]. Transa- ctions of China Electrotechnical Society, 2017, 32(23): 16-22.
[6] 王荀, 邱阿瑞. 笼型异步电动机径向电磁力波的有限元计算[J]. 电工技术学报, 2012, 27(7): 109-117.
Wang Xun, Qiu Arui.Finite element calculation of radial electromagnetic force wave in squirrel-cage asynchronous motors[J]. Transactions of China Elec- trotechnical Society, 2012, 27(7): 109-117.
[7] Mosallanejad A, Shoulaie A.Calculation and measurement of coil inductance profile in tubular linear reluctance motor and its validation by three- dimensional FEM[J]. Journal of Electrical Engin- eering, 2011, 62(4): 271-276.
[8] 梅亮, 刘景林, 付朝阳. 电磁铁吸力计算及仿真分析研究[J]. 微电机, 2012, 45(6): 6-9.
Mei Liang, Liu Jinglin, Fu Chaoyang.Calculation of electromagnet attractive force and simulation analysis[J]. Micromotors, 2012, 45(6): 6-9.
[9] 赵继国, 冀宏, 苏玛亮, 等. 衔铁结构对比例电磁铁行程-力特性的影响[J]. 甘肃科学学报, 2016, 28(5): 89-93, 129.
Zhao Jiguo, Ji Hong, Su Maliang, et al.The influence of armature structure on ratio electromagnet stroke- force characteristics[J]. Journal of Gansu Sciences, 2016, 28(5): 89-93, 129.
[10] 申屠胜男, 徐龙稳, 孟彬, 等. 双向比例电磁铁的设计及仿真分析[J]. 机械设计与研究, 2015, 31(1): 27-30.
Shentu Shengnan, Xu Longwen, Meng Bin, et al.Design and simulation analysis of bidirectional proportional electromagnet[J]. Journal of Mechanical Design and Research, 2015, 31(1): 27-30.
[11] 吴帅, 彭传龙, 焦宗夏, 等. 比例阀线性双向电磁铁设计与试验研究[J]. 机械工程学报, 2014, 50(22): 200-206.
Wu Shuai, Peng Chuanlong, Jiao Zongxia, et al.Design and experimental research of the linear bi-directional force solenoid for electro-hydraulic proportional valve[J]. Journal of Mechanical Engin- eering, 2014, 50(22): 200-206.
[12] 王宗伟, 任志彬, 常志鹏, 等. 基于ANSYS和AMESim的螺管电磁铁吸力仿真研究[J]. 导弹与航天运载技术, 2017(6): 93-97.
Wang Zongwei, Ren Zhibin, Chang Zhipeng, et al.Simulation of the solenoid force based on ANSYS and AMESim[J]. Missiles and Space Vehicles, 2017(6): 93-97.
[13] 黄晓凡, 田忠涛, 梁海彤. 带弹簧负载的电磁铁动态特性仿真与实验研究[J]. 机电工程, 2017, 34(9): 1024-1027.
Huang Xiaofan, Tian Zhongtao, Liang Haitong.Dynamic characteristics simulation and experiment of solenoid with spring load[J]. Journal of Mechanical and Electrical Engineering, 2017, 34(9): 1024-1027.
[14] 刘同娟, 金能强. 电磁铁瞬态特性的仿真研究[J].低压电器, 2005(6): 14-17, 32.
Liu Tongjuan, Jin Nengqiang.Simulation analysis and study on transient property of electromagnet[J]. Low Voltage Apparatus, 2005(6): 14-17, 32.
[15] 荣命哲, 娄建勇, 王小华. 永磁式接触器动触头动作特性仿真分析与试验研究[J]. 中国电机工程学报, 2005, 25(1): 109-113.
Rong Mingzhe, Lou Jianyong, Wang Xiaohua.Simulation analysis and experimental research of operating characteristic for moving contact of contactor with permanent magnet actuator[J]. Pro- ceedings of the CSEE, 2005, 25(1): 109-113.
[16] 陈国栋, 刘宏, 王江涛. 基于曲线拟合的PEBB单元散热优化设计[J]. 电工技术学报, 2016, 31(4): 71-78.
Chen Guodong, Liu Hong, Wang Jiangtao.Thermal analysis and optimization of PEBB unit based on curve fitting[J]. Transactions of China Electro- technical Society, 2016, 31(4): 71-78.
[17] 尉军军, 全力, 彭桂雪, 等. 基于最小二乘支持向量机的励磁特性曲线拟合[J]. 电力系统保护与控制, 2010, 38(11): 15-17, 24.
Wei Junjun, Quan Li, Peng Guixue, et al.Curve fitting of excitation characteristics based on the least squares support vector machine[J]. Power System Protection and Control, 2010, 38(11): 15-17, 24.
[18] 丁晓慧, 刘俊杰, 邢强. 基于自适应局部均值的EMD方法及其在谐波检测中的应用[J]. 电力系统保护与控制, 2017, 45(14): 17-25.
Ding Xiaohui, Liu Junjie, Xing Qiang.Adaptive local mean based empirical mode decomposition and its application in harmonic detections[J]. Power System Protection and Control, 2017, 45(14): 17-25.
[19] 匡文凯, 黎伟, 吴政球, 等. 基于功角曲线拟合的快速暂态稳定预估分析[J]. 电力系统保护与控制, 2009, 37(10): 93-97.
Kuang Wenkai, Li Wei, Wu Zhengqiu, et al.A fast transient stability predicting method by fitting[J]. Power System Protection and Control, 2009, 37(10): 93-97.
[20] Chen Junhong, Yang Junhua, Yang Jinming.MPPT algorithm for direct-drive wave energy generation based on improved perturbation-observation method[J]. Electrical Measurement & Instrumentation, 2017(16): 95-100.
[21] Nehl T W, Fouad F A, Demerdash N A. Deter- mination of saturated values of rotating machinery incremental and apparent inductances by an energy perturbation method[J]. IEEE Transactions on Power Apparatus & Systems, 2007, PAS-101(12): 4441-4451.