|
|
|
| Numerical Algorithm for Temperature Field of Coils in High-Voltage DC Relays |
| Li Ruyao1, Yang Wenying1, Xiao Bin2, Liang Huimin1 |
1. School of Electrical Engineering and Automation Harbin Institute of Technology Harbin 150001 China;
2. Guizhou Zhenhua Qunying Electric Appliance Co. Ltd Guiyang 550018 China |
|
|
|
|
Abstract High-voltage high-power DC relays are key components in the field of new energy vehicles. Multi-turns high-density winding coils in relays are key components in the magnetic circuit, and its working temperature will seriously affect the electromagnetic parameters of relays. The temperature of this kind of coil is high and uneven after working for a long time or reaching steady state. However, in the past studies, the multi-turn coil was mostly considered as a single component or a region that temperature was distributed uniformly, which was inconsistent with its actual temperature distribution. It could not provide the reference value of accurate maximum temperature for thermal design, and thermal design is the key step of relay's life reliability. In this paper, a numerical algorithm for temperature field of multi-turn high-density coils based on the thermal resistance network method and finite difference method is proposed, taking the influence of material properties in the winding such as copper wire, insulating paint, air etc. and dimension parameter like the diameter of wire, thickness of insulting paint, distance among wires etc. into account. With this method, the temperature distribution inside multi-turn coils can be worked out efficiently. By comparison with the finite element method and experimental results, the feasibility and high computational efficiency of the method proposed in this paper are proved. It provides the basis for thermal design of relays, and also provides a theoretical reference for the accurate calculation of the temperature in multi-field problems in relays.
|
|
Received: 29 June 2018
Published: 15 February 2019
|
|
|
|
|
|
[1] 席建中, 张宁, 韩成春. 电磁阀线圈温度预测建模及耐温性判断[J]. 控制工程, 2013, 20(2): 377-380.
Xi Jianzhong, Zhang Ning, Han Chengchun.Coil temperature prediction modelling of electromagnetic control valve and resistant temperature judgement[J]. Control Engineering of China, 2013, 20(2): 377-380.
[2] 黄琳敏, 陈德桂, 张敬菽. 计及物理参数随温度变化时螺管电磁铁温度场和瞬态热路的仿真分析[J]. 电工技术学报, 2003, 18(5): 27-31.
Huang Linmin, Chen Degui, Zhang Jingshu.Analysis of thermal field and transient thernal circuit of solenoid magnet by considering physical parameters as functions of temperatures[J]. Transactions of China Electrotechnical Society, 2003, 18(5): 27-31.
[3] 邓建国. 用网络拓扑法计算同步发电机定子的温度分布[J]. 电工技术杂志, 1999(2): 12-15.
Deng Jianguo.Calculating temperature distributionin the stator of a synchronous generatorby means of network topologic method[J]. Electrotechnical Journal, 1999(2): 12-15.
[4] 张明慧. 大型电机二维温度场的网络拓扑法计算[J]. 计算技术与自动化, 2005, 24(4): 40-42.
Zhang Minghui.The computation of 2-D thermal field in large electrical machines with network topologic method[J]. Computing Technology and Automation, 2005, 24(4): 40-42.
[5] 王晓远, 高鹏. 等效热网络法和有限元法在轮毂电机温度场计算中的应用[J]. 电工技术学报, 2016, 31(16): 26-33.
Wang Xiaoyuan, Gao Peng.Application of equivalent thermal network method and finite element method in temperature calculation of in-wheel motor[J]. Transa- ctions of China Electrotechnical Society, 2016, 31(16): 26-33.
[6] 纽春萍, 陈德桂, 刘颖异. 交流接触器温度场仿真及影响因素的分析[J]. 电工技术学报, 2007, 22(5): 71-77.
Niu Chunping, Chen Degui, Liu Yingyi.Temperature field simulation of AC contactor and analysis of its influence factors[J]. Transactions of China Electro- technical Society, 2007, 22(5): 71-77.
[7] 纽春萍, 陈德桂, 刘颖异, 等. 计及主回路和电磁系统发热的交流接触器数值热分析[J]. 中国电机工程学报, 2007, 27(15): 53-58.
Niu Chunping, Chen Degui, Liu Yingyi, et al.Thermal simulation of AC contactor considering the heat generated by main circuit and electromagnet system[J]. Proceedings of the CSEE, 2007, 27(15): 53-58.
[8] 王文龙. 密封电磁继电器发热特性分析的研究[D]. 哈尔滨: 哈尔滨工业大学, 2007.
[9] Zhao Bo, Zou Jibin, Qi Wenjuan.Magnetic-thermal element sequential coupling algorithm in the appli- cation of permanent magnet generator temperature analysis[C]//International Conference on Electrical Machines and Systems (ICEMS), Incheon, South Korea, 2010: 1804-1808.
[10] 苏秀苹, 陆俭国, 刘帼巾, 等. 小型直流电磁继电器温度场仿真分析[J]. 电工技术学报, 2011, 26(8): 185-189.
Su Xiuping, Lu Jianguo, Liu Guojin, et al.Thermal field simulation analysis of miniature DC electro- magnetic relays[J]. Transactions of China Electro- technical Society, 2011, 26(8): 185-189.
[11] Liu Guojin, Liu Haiqiang, Zheng Bin.Thermal simulation of small capacity AC contactor based on ANSYS[C]//IEEE Proceedings of 26th International Conference on Electrical Contacts, Beijing, China, 2012: 479-483.
[12] 杨文英, 郭久威, 王茹, 等. 继电器电磁机构电磁-热耦合模型建立与计算方法[J]. 电工技术学报, 2017, 32(13): 169-177.
Yang Wenying, Guo Jiuwei, Wang Ru, et al.Establishing and calculating methods of electromagnetic- thermal coupling model of relay's electromagnetic mechanism[J]. Transactions of China Electro- technical Society, 2017, 32(13): 169-177.
[13] 林抒毅, 许志红. 交流电磁阀三维温度特性仿真分析[J]. 中国电机工程学报, 2012, 32(36): 156-164.
Lin Shuyi, Xu Zhihong.Simulation and analysis on the three-dimensional temperature field of AC solenoid valves[J]. Proceedings of the CSEE, 2012, 32(36): 156-164.
[14] Fan Y, Wen X, Jafri S A K S. 3D transient temperature field analysis of the stator of a hydro- generator under the sudden short-circuit condition[J]. IET Electric Power Applications, 2012, 6(3): 143-148.
[15] Son K T, Lee C C.Temperature measurement of high-density winding coils of electromagnets[J]. IET Science, Measurement & Technology, 2012, 6(1): 1-5.
[16] 刘平, 孙千志, 叶津, 等. 基于直流电压注入的永磁同步电机定子绕组温度在线估计[J]. 电工技术学报, 2017, 32(20): 198-204.
Liu Ping, Sun Qianzhi, Ye Jin, et al.Online estimation of stator winding temperature of permanent magnet synchronous motor based on DC voltage injection[J]. Transactions of China Electro- technical Society, 2017, 32(20): 198-204.
[17] 杨世铭, 陶文铨. 传热学[M]. 4版. 北京: 高等教育出版社, 2006. |
|
|
|
2018, Vol. 33 
