非对称V型内置式永磁同步电机的多目标优化设计

doi:10.19595/j.cnki.1000-6753.tces.L80218

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (25231 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to reduce the torque ripple of the interior permanent magnet synchronous motor (IPMSM), this paper proposes a five-phase, 40-slots and 8-poles asymmetric V-shape IPMSM. Taking low torque ripple and high torque output as the optimization goals, a multi-objective optimization method based on the combination of design parameter stratification and response surface method is introduced, which aims to accurately obtain the motor design parameters and improve the performance of the proposed asymmetric V-shape IPMSM. By analyzing the electromagnetic performances between initial and optimal motors, it is found that the torque ripple can be effectively reduced. Compared with the prototype of asymmetric and shifted rotor poles, asymmetric V-shape IPMSM based on the design of multi-objective optimization method can accommodate high torque density and low torque ripple.

Key words： Asymmetric V-shaped interior permanent magnet synchronous motor multi-objective optimization design parameter stratification response surface method

Received: 29 June 2018 Published: 15 February 2019

PACS:

TM351

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Liu Guohai
	Wang Yanyang
	Chen Qian

Cite this article:

Liu Guohai,Wang Yanyang,Chen Qian. Multi-Objective Optimization of an Asymmetric V-Shaped Interior Permanent Magnet Synchronous Motor[J]. Transactions of China Electrotechnical Society, 2018, 33(zk2): 385-393.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.L80218 OR https://dgjsxb.ces-transaction.com/EN/Y2018/V33/Izk2/385

[1] 郑江, 代颖, 石坚. 车用永磁同步电机的电磁噪声特性[J]. 电工技术学报, 2016, 31(增刊1): 53-59.
Zheng Jiang, Dai Ying, Shi Jian.Electromagnetic noise characteristics of permanent magnet synchronous motor applied in electric vehicle[J]. Transactions of China Electrotechnical Society, 2016, 31(S1): 53-59.
[2] 张岳, 曹文平, John Morrow.电动车用内置式永磁电机(PMSM)设计[J].电工技术学报, 2015, 30(14): 108-115.
Zhang Yue, Cao Wenping, John Morrow.Design of an interior permanent magnet synchronous motor (PMSM) for EV traction[J]. Transactions of China Electrotechnical Society, 2015, 30(14): 108-115.
[3] 樊英, 谭超. 内置式交替极永磁同步电机性能及机理研究[J]. 电工技术学报, 2018, 33(11): 2414-2422.
Fan Ying, Tan Chao.Analysis of electromagnetic performance and principles in inserted consequent- pole permanent magnet synchronous machines[J]. Transactions of China Electrotechnical Society, 2018, 33(11): 2414-2422.
[4] Jia Hongyun, Cheng Ming, Hua Wei, et al.Torque ripple suppression in flux-switching PM motor by harmonic current injection based on voltage space- vector modulation[J]. IEEE Transactions on Magnetics, 2010, 46(6): 1527-1530.
[5] 李全武, 窦满峰. 一种无刷直流电动机齿槽转矩分数槽削弱方法[J]. 微特电机, 2012, 40(3): 31-33.
Li Quanwu, Dou Manfeng.A cogging torque reducing method of fractional-slot in brushless DC motors[J]. Small and Special Electrical Machines, 2012, 40(3): 31-33.
[6] Zhu Z Q, Howe D.Influence of design parameters on cogging torque in permanent magnet machines[J]. IEEE Transactions on Energy Conversion, 2000, 15(4): 407-412.
[7] 沈勇环, 陈益广, 赵维友. 削弱反磁通电机齿槽转矩的两种新方法[J]. 电工技术学报, 2007, 22(7): 141-144.
Shen Yonghuan, Chen Yiguang, Zhao Weiyou.Two new methods to reduce cogging torque in flux reversal machine[J]. Transactions of China Electro- technical Society, 2007, 22(7): 141-144.
[8] 鲍晓华, 吴长江, 胡云鹏, 等. 一种优化表插式永磁电机性能的方法[J]. 电工技术学报, 2018, 33(2): 238-244.
Bao Xiaohua, Wu Changjiang, Hu Yunpeng, et al.A method for optimizing performance of insert permanent magnet motor[J]. Transactions of China Electrotechnical Society, 2018, 33(2): 238-244.
[9] 刘铭传, 邹继明, 胡建辉. 表贴式永磁同步电动机转矩特性分析[J]. 微电机, 2016, 49(7): 6-8.
Liu Mingchuan, Zou Jiming, Hu Jianhui.Analysis of torque characteristics of surface permanent magnet synchronous motor[J]. Micromotors, 2016, 49(7): 6-8.
[10] Chen Qian, Xu Gaohong, Liu Guohai, et al.Torque ripple reduction in five-phase interior permanent magnet motors by lowering interactional MMF[J]. IEEE Transactions on Industrial Electronics, 2018, 65(11): 8520-8531.
[11] 兰志勇, 杨向宇, 王芳媛, 等. Taguchi方法在内嵌式正弦波永磁同步电机优化设计中的应用[J]. 电工技术学报, 2011, 26(12): 37-42.
Lan Zhiyong, Yang Xiangyu, Wang Fangyuan, et al.Application for optimal designing of sinusoidal interior permanent magnet synchronous motor by using the Taguchi method[J]. Transactions of China Electrotechnical Society, 2011, 26(12): 37-42.
[12] 王刚, 李小民, 李治源, 等. 基于模拟退火算法的无刷直线直流电机恒推力优化[J]. 微电机, 2012, 45(10): 61-65.
Wang Gang, Li Xiaomin, Li Zhiyuan, et al.Optimization of constant force of brushless DC motor based on simulated annealing algorithm[J]. Micro- motors, 2012, 45(10): 61-65.
[13] 孙玉坤, 袁野, 黄永红, 等. 磁悬浮开关磁阻电机多目标优化设计[J]. 电机与控制学报, 2016, 20(11): 32-39.
Sun Yukun, Yuan Ye, Huang Yonghong, et al.Multi-objective optimal design of single winding bearingless switched reluctance motor[J]. Journal of Motor and Control, 2016, 20(11): 32-39.
[14] 陈云云, 朱孝勇, 全力, 等. 基于参数敏感度的双凸极永磁型双定子电机的优化设计和性能分析[J]. 电工技术学报, 2017, 32(8): 160-168.
Chen Yunyun, Zhu Xiaoyong, Quan Li, et al.Parameter sensitivity optimization design and performance analysis of double-salient permanent- magnet double-stator machine[J]. Transactions of China Electrotechnical Society, 2017, 32(8): 160-168.
[15] Lei Gang, Liu Chengcheng, Zhu Jianguo, et al.Techniques for multilevel design optimization of permanent magnet motors[J]. IEEE Transactions on Energy Conversion, 2015, 30(4): 1574-1584.
[16] Ma Cong, Qu Liyan, Multiobjective optimization of switched reluctance motors based on design of experiments and particle swarm optimization[J]. IEEE Transactions on Energy Conversion, 2015, 30(3): 1144-1153.
[17] Xiang Zixuan, Zhu Xiaoyong, Quan Li, et al.Multilevel design optimization and operation of a brushless double mechanical port flux-switching permanent-magnet motor[J]. IEEE Transactions on Industrial Electronics, 2016, 63(10): 6042-6054.
[18] 颜爽, 陈昊, 王青, 等. 开关磁阻发电机控制参数多目标优化研究[J]. 电工技术学报, 2017, 32(15): 66-75.
Yan Shuang, Chen Hao, Wang Qing, et al.Research on multi-objective optimization of control parameters for switched reluctance generators[J]. Transactions of China Electrotechnical Society, 2017, 32(15): 66-75.
[19] 王晓远, 张力, 许卫刚. 基于田口算法的内置式永磁同步电机多目标优化设计[J]. 微电机, 2016, 49(5): 1-5.
Wang Xiaoyuan, Zhang Li, Xu Weigang.Multi- objective optimal design for interior permanent magnet synchronous motor based on Taguchi method[J]. Micromotors, 2016, 49(5): 1-5.
[20] Si Jikai, Zhao Suzhen, Feng Haichao, et al.Multi- objective optimization of surface-mounted and interior permanent magnet synchronous motor based on Taguchi method and response surface method[J]. Chinese Journal of Electrical Engineering, 2018, 4(1): 67-73.
[21] 李争, 张璐, 王群京, 等. 基于响应面法的永磁转子偏转式三自由度电动机结构参数的优化设计[J]. 电工技术学报, 2015, 30(13): 134-142.
Li Zheng, Zhang Lu, Wang Qunjing, et al.Optimal design of structure parameters of three-DOF deflection type PM motor based on response surface methodology[J]. Transactions of China Electro- technical Society, 2015, 30(13): 134-142.
[22] Zhang Yong, Gong Dunwei, Jiang Ya’nan.Barebones particle swarm for multi-objective optimization problems[J]. International Journal of Innovative Computing & Applications, 2009, 2(2): 86-99.
[23] Zhang Yong, Gong Dunwei, Ding Zhonghai.A bare-bones multi-objective particle swarm optimi- zation algorithm for environmental/economic dispatch[J]. Information Sciences, 2012, 192(6): 213-227.