交流电机高频轴电流集中参数模型与分布参数模型的对比研究

doi:10.19595/j.cnki.1000-6753.tces.L80610

Abstract
Figure/Table
References
Related Citation (13)

Download: PDF (31348 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract PWM (pulse width modulation) frequency conversion technology is widely used in motors speed regulation and control system. However it also brings bearing currents problems, which seriously effects the safety and reliability of AC motors. The equivalent circuit of bearing current is a critical factor to accurately predict the current. This paper compares the lumped parameter equivalent circuit and the distributed parameter circuit of baring currents. The results show that the lumped parameter circuit and the three-phase distribution circuit have no difference on bearing current amplitude, but which affects the frequency of the current. Then the influence of the distributed parameter circuit along the shaft is investigated. The segment number has influence on the results. The experiments show that the simulation results of the distributed parameter model are closer to that of the test than that of the lumped parameter model.

Key words： AC motor high frequency bearing current distribution parameter lumped parameter

Received: 04 July 2018 Published: 15 February 2019

PACS:

TM343

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Ren Xuejiao
	Liu Ruifang

Cite this article:

Ren Xuejiao,Liu Ruifang. Comparative Research on the Lumped Parameter Model and the Distributed Parameter Model in High Frequency Bearing Current Problem of AC Motors[J]. Transactions of China Electrotechnical Society, 2018, 33(zk2): 344-351.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.L80610 OR https://dgjsxb.ces-transaction.com/EN/Y2018/V33/Izk2/344

[1] Fan Zhuxia, Zhi Yongjian, Zhu Bingquan, et al.Research of bearing voltage and bearing current in induction motor drive system[C]//Asia-Pacific Inter- national Symposium on Electromagnetic Compatibility, Shenzhen, China, 2016: 1195-1198.
[2] 刘瑞芳, 任雪娇, 陈嘉垚. 双馈异步风力发电机的轴电流分析[J]. 电工技术学报, 2018, 33(19): 4517-4525.
Liu Ruifang, Ren Xuejiao, Chen Jiayao.Analysis of bearing currents in doubly-fed induction wind turbines[J]. Transactions of China Electrotechnical Society, 2018, 33(19): 4517-4525.
[3] 王禹, 白保东, 刘威峰, 等. 频域寄生电容法变频电机Hertz轴承电流密度计算[J]. 电工技术学报, 2015, 30(2): 189-195.
Wang Yu, Bai Baodong, Liu Weifeng, et al.Hertz bearing current density calculation of variable frequency driven motors by frequency domain parasitic capacitance method[J]. Transactions of China Electrotechnical Society, 2015, 30(2): 189-195.
[4] Plazenet T, Boileau T, Caironi C, et al.An overview of shaft voltages and bearing currents in rotating machines[C]//IEEE Industry Applications Society Annual Meeting, Portland, OR, USA, 2016: 1-8.
[5] Magdun O, Binder A.Calculation of roller and ball bearing and prediction of EDM current[C]//2009 35th Annual Conference of IEEE Industrial Electronics, Porto, Portugal, 2009: 1047-1052.
[6] 刘瑞芳, 李俊峰, 桑秉谦, 等. 基于电磁场数值计算的变频供电感应电机耦合电容与轴电压的分析[J]. 电工技术学报, 2015, 30(14): 161-169.
Liu Ruifang, Li Junfeng, Sang Bingqian, et al.Modeling of coupled capacitances and bearing voltage in induction motors fed by inverters based on numerical calculation of electromagenetic field[J]. Transactions of China Electrotechnicall Society, 2015, 30(14): 161-169.
[7] 刘瑞芳, 陈嘉垚, 马喜平, 等. 基于PWM逆变器供电轴电流问题的交流电机耦合电容的计算与测量[J]. 电工技术学报, 2014, 29(1): 60-67.
Liu Ruifang, Chen Jiayao, Ma Xiping, et al.Calcu- lation and measurement of coupling capacitances in AC motors based on bearing currents problem induced by PWM inverters[J]. Transactions of China Electrotechnical Society, 2014, 29(1): 60-67.
[8] 刘瑞芳,陈嘉垚. 多导体静电独立系统部分电容的测量[J]. 电气电子教学学报, 2017, 39(2): 89-93.
Liu Ruifang, Chen Jiayao.Measurement of the partition capacitance of independent electrostatic multiple conductors system[J]. Journal of Electrical & Electronic Education, 2017, 39(2): 89-93.
[9] Chen Shaotang, Lipo T A.Circulating type motor bearing currents in inverter drives[J]. IEEE Industry Applications Magazine, 1996, 4(1): 32-38.
[10] Muetze A, Binder A.Calculation of motor capacitances for prediction of discharge bearing currents in machines of inverter-based drive systems[C]// IEEE International Conference on Electric Machines and Drives, San Antonio, TX, USA, 2005: 264-270.
[11] Naik R, Nondahl T A, Melfi M J, et al.Distributed parameter circuit modle for shaft voltage prediction in induction motors fed by PWM based AC drives[C]// Conference Record of the 2001 IEEE Industry Applications Conference, 36th IAS Annual Meeting, Chicago, IL, USA, 2001, 2: 1118-1122.
[12] Park J K, Wellawatta T R, Ullah Z, et al.New equivalent circuit of the IPM-type BLDC motor for calculation of shaft voltage by considering electric and magnetic fields[J]. IEEE Transactions on Industry Applications, 2016, 52(5): 3763-3771.
[13] 王禹, 白保东. 分布参数共模等效电路关键参数确定及轴承电流计算[J]. 电工技术学报, 2014, 29(增刊1): 124-131.
Wang Yu, Bai Baodong.Determination of key parameters in distribution parameters common mode equivalent circuit and calculation of the bearing currents[J]. Transactions of China Electrotechnical Society, 2014, 29(S1): 124-131.
[14] 桑秉谦. 变频供电交流电机轴电流的分析与测量[D]. 北京: 北京交通大学, 2016.
[15] Muetze A.Bearing currents in inverter-fed AC- motors[D]. Darmstadt: Technische Universitaet Darmstadt, 2004.