内置式交替极永磁同步电机性能及机理研究

doi:10.19595/j.cnki.1000-6753.tces.170506

Abstract
Figure/Table
References (25)
Related Citation (15)

Download: PDF (26257 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract

Based on finite element method, the electromagnetic performancesof traditional inserted permanent magnet synchronous machine(IPMSM) and inserted consequent-pole permanent magnet synchronous machine(ICPPMSM) are compared and analyzed. In this paper, a five-phase 20-slot 18-pole ICPPMSM is proposed. Compared with the traditional inserted V-shaped machine with same design parameters, the proposed consequent-pole machine can obviously save the amount of PMs but maintain the comparable output capability, which can improve reliability and save costs. Magnetic circuit and Fourier series analysis are applied to compute fundamental amplitude of airgap flux under each pole. The analytical results demonstrate the configuration of consequent-pole can increase the utilization ratio of PMs.Besides, unlike the traditional IPMSM, the pole-arc of PM-pole in ICPPMSM has wider selection range. By choosing pole-arc of PM-pole and iron-pole, the output performance of ICPPMSM can be further improved. Based on harmonic analysis of induced voltage, the harmonic current injection is more suitable for ICPPMSM. Finally, flux barriers, PM magnetizing length and unequal iron-pole are optimized to acquire better torque quality and flux weakening.

Key words： Permanent magnet synchronousmachines consequent-pole finite element analysis electromagnetic performance

Received: 24 April 2017 Published: 13 June 2018

PACS:

TM351

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Fan Ying
	TanChao

Cite this article:

Fan Ying,TanChao. Analysis of Electromagnetic Performanceand Principles in Inserted Consequent-Pole Permanent Magnet Synchronous Machines[J]. Transactions of China Electrotechnical Society, 2018, 33(11): 2414-2422.

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.170506 OR https://dgjsxb.ces-transaction.com/EN/Y2018/V33/I11/2414

[1] Dorrell D G, Knight A M, Popescu M, et al.Comparison of different motor design drives for hybrid electric vehicles[C]//IEEE Energy Conversion Congress and Exposition, Atlanta, GA, USA,2010: 3352-3359.
[2] Boldea I, Tutelea L N, Parsa L, et al.Automotive electric propulsion systems with reduced or no permanentmagnets: an overview[J]. IEEE Transactions on Industrial Electronics, 2014, 61(10): 5696-5711.
[3] 张岳, 曹文平, John Morrow.电动车用内置式永磁电机(PMSM)设计[J].电工技术学报, 2015, 30(14): 108-115.
Zhang Yue, Cao Wenping, MorrowJ. Design of an interior permanent magnet synchronous motor (PMSM) for EV traction[J]. Transactions of China Electrotechnical Society, 2015, 30(14): 108-115.
[4] 王晓远, 高鹏, 赵玉双. 电动汽车用高功率密度电机关键技术[J]. 电工技术学报, 2015, 30(6): 53-59.
Wang Xiaoyuan, GaoPeng, Zhao Yushuang. Key technology of high power density motors in electric vehicles[J]. Transactions of China Electrotechnical Society, 2015, 30(6): 53-59.
[5] McCarty F B. Consequent pole permanent magnet rotor: US: 4631435[P]. San Pedro, Calif, 1985.
[6] 李琛, 章跃进, 仇志坚. 无轴承交替极永磁电机空载气隙磁场全局解析模型[J]. 电工技术学报, 2012, 27(11): 104-110.
Li Chen, Zhang Yuejin, QiuZhijian. Exact analytical model for the no-load air-gap magnetic field calculation in consequent-pole permanent magnet bearinglessmotor[J]. Transactions of China Electrotechnical Society, 2012, 27(11): 104-110.
[7] Amemiya J, Chiba A, Dorrell D G, et al.Basic characteristic of a consequent-pole-type bearinglessmotor[J]. IEEE Transactions on Magnetics, 2005, 41(1): 82-89.
[8] 周晓燕, 李琛,仇志坚, 等. 基于摄动法的交替极永磁电机偏心磁场解析计算[J]. 电工技术学报, 2013, 28(9): 321-331.
Zhou Xiaoyan, Li Chen, QiuZhijian, et al. Magnetic field calculation for consequent-pole motor with rotor eccentricity based on perturbation method[J]. Transactions of China Electrotechnical Society, 2013, 28(9): 321-331.
[9] 丁强, 邓智泉,王晓琳. 无轴承交替极永磁电机集中式悬浮绕组结构及其优化设计方法[J]. 电工技术学报, 2015, 30(18): 104-111.
Ding Qiang, Deng Zhiquan, Wang Xiaolin.Structure of concentrated suspension windings and its optimization design method of bearingless consequent-pole permanent magnet motor[J]. Transactions of China Electrotechnical Society, 2015, 30(18): 104-111.
[10] Tapia J A.Development of the consequent pole permanent magnet machine[D]. Wisconsin: The University of Wisconsin-Madsion, 2002.
[11] Chung SU, Moon SH, Kim DJ, et al.Development of a 20-pole-24-slot SPMSM with consequent pole rotor for in-wheel direct dirve[J]. IEEE Transactions on Industrial Electronics, 2016, 63(1): 302-309.
[12] Chung SU, Kim JW, Chun YD, et al.Fractional slot concentrated winding PMSM with consequent pole rotor for a low-speed direct drive: reduction of rare earth permanent magnet[J]. IEEE Transactions on Energy Conversion, 2015, 30(1): 103-109.
[13] Chung SU, Kim JM, Koo DH, et al.Fractional slot concentrated winding permanent magnet synchronous machine with consequent pole rotor for low speed direct drive[J]. IEEE Transactions on Magnetics, 2012, 48(11): 2965-2968.
[14] BaiJingang, Zheng Ping, Yu Bin, et al. Investigation of a magnetic-field modulated brushless double-rotor machine with the same polarity of PM rotor[J]. IEEE Transactions on Magnetics, 2015, 51(11): 8110004.
[15] Li Dawei, QuRonghai, Li Jian, et al. Consequent-pole toroidal-winding outer-rotor Vernier permanent-magnet machines[J]. IEEE Transactions on Industry Applications, 2015, 51(6): 4470-4481.
[16] Chung SU, Kim JW, Woo BC, et al.A novel design of modular three-phase permanent magnet machine with consequent pole rotor[J]. IEEE Transactions on Magnetics, 2011, 47(10): 4215-4218.
[17] LuoXiaogang, Lipo T A. A synchronous/permanent magnet hybrid AC machine[J]. IEEE Transactions on Energy Conversion, 2000, 15(2): 203-210.
[18] Zhang Qi, Huang Surong, XieGuodong. Design and experimental verification of hybrid excitation machine with isolated magnetic paths[J]. IEEE Transactions on Energy Conversion, 2010, 25(4): 993-1000.
[19] Huang Shaogang, Wang Zhen, Wang Aifeng, et al.Study on doubly-fed hybrid poles permanent magnet synchronous machine[C]//36th Annual Conference on IEEE Industrial Electronics Society, Glendale, AZ, USA, 2010: 990-995.
[20] Tapia J A, Leonardi F, Lipo T A.Consequent-pole permanent-magnet machine with extended field- weakening capability[J]. IEEE Transactions on Industry Applications, 2003, 36(9): 1704-1709.
[21] Wang Yunchong, Fu W N, NiuShuangxia. A novel structure of dual-stator hybrid excitation synchronous motor[J]. IEEE Transactions on Applied Superconductivity, 2016, 26(4): 0605805.
[22] ZouTianjie, QuRonghai, Li Jian, et al. A consequent pole, dual rotor, axial flux vernier permanent magnet machine[C]//10th International Conference on Ecological Vehicles and Renewable Energies, Monte Carlo, Monaco, 2015: 1-9.
[23] Hua Hao, Zhu Z Q, Zhan Hanlin.Novel consequent-pole hybrid excited machine with separated excitation stator[J]. IEEE Transactions on Industrial Electronics, 2016, 63(8): 4718-4728.
[24] GaoYuting, QuRonghai, Li Dawei, et al. Consequent-pole flux-reversal permanent-magnet machine for electric vehicle propulsion[J]. IEEE Transactions on Applied Superconductivity, 2016, 26(4): 5200105.
[25] 康惠林, 周理兵,王晋, 等. 多相分数槽集中绕组表贴式永磁电机谐波电流的确定及其影响[J]. 电工技术学报, 2015, 30(9): 22-29.
Kang Huilin, Zhou Libing, Wang Jin, et al.Harmonic currents determination and their impacts on multiphase fractional-slot concentrated winding surface-mounted permanent magnet machine[J]. Transactions of China Electrotechnical Society, 2015, 30(9): 22-29.