选相投切特高压线路及对其操作冲击绝缘的影响

doi:10.19595/j.cnki.1000-6753.tces.170098

Abstract
Figure/Table
References
Related Citation (8)

Download: PDF (22120 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The continuous development of the 1000kV UHV system puts forward higher requirements to the allowable value of the switching overvoltage for the transmission line. How to restrict the operation overvoltage multiple of transmission lines had already been a crucial question to be solved for the development of ultra-high voltage grid. The controlled switching technology is an important technology to solve this difficult point. However the development bottleneck of this technology is currently the study of pre-breakdown and mechanical dispersion for the circuit breaker. The dielectric recovery characteristic curve was obtained through the electric field strength distribution of arc extinguish chambers under different opening distance in this paper. The closing and reclosing model of 1000kv transmission lines were built in electro-magnetic transient program ATP-EMTP. The simulation results show that the amplitude of operation overvoltage can be effectively suppressed by controlled switching and MOV. Therefore decreasing switching overvoltage plays an important role in reducing the air gap of the tower, which can lessen the investment cost of ultra-high voltage grid.

Key words： 1000kV transmission lines controlled switching pre-breakdown closing operation overvoltage reclosing insulation coordination

Received: 23 January 2017 Published: 14 March 2018

PACS:

TM864

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors

Cite this article:

URL:

https://dgjsxb.ces-transaction.com/EN/10.19595/j.cnki.1000-6753.tces.170098 OR https://dgjsxb.ces-transaction.com/EN/Y2018/V33/I5/1151

[1] DongXinzhou, LuoShuxin, Shi Shenxing, et al. Implementation and application of practical traveling-wave-based directional protection in UHV transmission lines[J].IEEE Transactions on Power Delivery,2016,31(1):294-302.
[2] Liao Jintao, PengZongren, Wang Qingyu. Potential distribution analysis of Y-type insulators in UHV 1000kV double circuit transmission lines[C]//IEEE 11th International Conference on the Properties and Applications of Dielectric Material,2015: 576-579.
[3] 李光范,高克利, 张翠霞, 等. 1000kV交流试验示范工程的过电压实测[J]. 电网技术, 2010, 34(12): 24-28.
LiGuangfan, GaoKeli, ZhangCuixia, et al. Field over-voltage measurement of 1000kV AC power transmission test and pilot project[J]. Power System Technology, 2010, 34(12):24-28.
[4] 詹花茂, 刘波, 颜廷利, 等. 操作冲击下空间电荷对间隙放电的影响[J] . 电工技术学报, 2014, 29(2): 212-218.
Zhan Huamao, Liu Bo, Yan Tingli, et al.Influence of space charge on air gap discharge under switching impulse[J]. Transactions of China Electrotechnical Society, 2014, 29(2): 212-218.
[5] 陈思浩. 1000kV输电线路操作过电压的研究[D]. 长沙: 湖南大学, 2007.
[6] 舒胜文, 刘畅. 选相抑制1000kV线路合闸过电压的仿真研究[J]. 电气技术, 2016, 17(1):27-32.
ShuShengwen, Liu Chang. Simulation research on limit of closing overvltages by phase-controlled technology in 1000kV transmission lines[J]. Electrical Engineering, 2016, 17(1): 27-32.
[7] 刘忠伟. 选相投切特高压线路抑制操作过电压研究[D]. 大连: 大连理工大学, 2010.
[8] Stanek M.Analysis of circuit breaker controlled switching operations- from manual to automatic[C]// 50th International Universities Power Engineering Conference, Stoke on Trent, UK, 2015: 1-6.
[9] 林莘, 夏亚龙, 刘卫东, 等. 电容器组投切用SF₆断路器介质恢复特性数值计算与试验研究[J]. 电工技术学报, 2015, 30(17):161-171.
LinXin, Xia Yalong, LiuWeidong, et al.The numerical computation and experiment research on dielectric recovery characteristics of SF₆circuit breaker for switching capacitor bank[J]. Transactions of China Electrotechnical Society, 2015, 30(17):161-171.
[10] 李俐莹, 刘晓明. 能量分离喷口高压SF₆断路器灭弧室电场分析[J]. 电工技术学报, 2015, 30(13):56-62.
LiLiying, Liu Xiaoming. Analysis on the electrical field of high voltage SF₆ arc quenching chamber with energy separation nozzle[J]. Transactions of China Electrotechnical Society, 2015, 30(13):56-62.
[11] 苏菲. 特高压交直流输电系统的绝缘配合[D]. 杭州: 浙江大学, 2012.
[12] 葛国伟, 廖敏夫, 黄金强, 等. 双断口真空断路器配合特性仿真与试验[J]. 电工技术学报, 2016, 31(22):57-65.
GeGuowei, Liao Minfu, Huang Jinqiang, et al. Simulation and experimental of matching characteristics of vacuum circuit breakers with double-break[J]. Transactions of China Electrotechnical Society,2016 , 31(22):57-65.
[13] 叶玮. 特高压断路器液压操动机构设计[D]. 沈阳: 沈阳工业大学, 2013.
[14] 林莘, 王飞鸣, 刘卫东, 等.高压SF₆断路器关合预击穿特性计算与试验研究[J]. 中国电机工程学报, 2016, 36(5): 1445-1452.
LinXin, WangFeiming, LiuWeidong, et al. Research on calculations and experiments of closing pre-strike characteristics in high voltage SF₆ circuit breakers[J]. Proceedings of the CSEE, 2016, 36(5): 1445-1452.
[15] 车文骏, 宋继军, 张晓星, 等. 1000kV交流特高压GIS型和瓷套型金属氧化物避雷器的研发[J]. 电力设备, 2007, 8(4): 14-18.
CheWenjun, Song Jijun, Zhang Xiaoxing, et al. R & D of 1000kV UHVAC gis and porcelain-clad metal oxide arrester[J]. Electrical Equipment, 2007,8(4):14-18.
[16] 罗晓晓. 特高压避雷器的结构设计及主要性能参数[J]. 河北电力技术, 2015, 34(6): 1.
LuoXiaoxiao. Structural design and main performance parameters of UHV arrester[J]. Hebei Electric Power, 2015, 34(6): 1.
[17] 孙秋芹, 汪沨, 刘洋, 等.特高压输电线路潜供电流的暂态特性研究[J] . 电工技术学报, 2016, 31(3): 97-103.
Sun Qiuqin, Wang Feng, Liu Yang, et al.Research on transient characteristics of secondary arc current of ultra high voltage transmission lines[J]. Transactions of China Electrotechnical Society, 2016, 31(3): 97-103.
[18] 国家电网公司,国网电力科学研究院,中国电力科学研究院. GB/Z24842-2009. 1000kV特高压交流输变电工程过电压和绝缘配合[S].北京:中国标准出版社, 2009.
[19] 中国电力工程顾问集团公司, 国家电网公司. GB 50665-2011. 1000kV架空输电线路设计规范[S]. 北京: 中国计划出版社, 2011.