开关DC-DC变换器电容电流脉冲序列控制

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (468 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract This paper proposes capacitor current pulse train (CC-PT) control technique for buck converter. Different from the conventional pulse train (PT) control technique, the high and low power control pulses of CC-PT control which have the same frequency but different duty cycles are generated, by sensing the capacitor current and comparing with two different control currents. The control principle and character of CC-PT-controlled Buck converter operating in both discontinuous condition mode (DCM) and continuous conduction mode (CCM) are presented. The theoretical analysis shows that taken the capacitor current as the current inner loop, the inductor current ripple is limited and the low-frequency oscillation phenomenon can be eliminate effectively. The experimental results show that CC-PT control benefits from fast transient response, furthermore, the steady-state performance of CC-PT-controlled buck converter is better than that of PT-controlled buck converter.

Key words： Capacitor current pulse train continuous current mode Buck converter

Received: 22 August 2014 Published: 13 October 2016

PACS:

TM461

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Xu Lijun
	Sha Jin
	Xu Duo
	Zhong Shu

Cite this article:

Xu Lijun,Sha Jin,Xu Duo等. Capacitor Current Pulse Train Control for Switching DC-DC Converter[J]. Transactions of China Electrotechnical Society, 2016, 31(18): 100-107.

URL:

https://dgjsxb.ces-transaction.com/EN/ OR https://dgjsxb.ces-transaction.com/EN/Y2016/V31/I18/100

[1] 陈道炼, 汤雨, 宋海峰, 等. 单级不间断高功率因数直流开关电源研究[J].中国电机工程学报, 2005, 25(9): 135-138.
Chen Daolian, Tang Yu, Song Haifeng, et al. Reserch on single-state uninterruptible DC switching power supplies with high power factor[J]. Proceedings of the CSEE, 2005, 25(9): 135-138.
[2] 余明杨, 蒋新华, 王莉, 等. 开关电源的建模与优化设计研究[J].中国电机工学学报, 2006, 26(2): 165-169.
Yu Mingyang, Jiang Xinhua, Wang Li, et al. Modeling and optimization design for switching power supply[J]. Proceedings of the CSEE, 2006, 26(2): 165-169.
[3] Telefus M D, Wong D T, Geber C R. Operating a power converter at optimal efficiency: US, 6304473B1[P]. 2001-10-16.
[4] Telefus M, Shteynberg A, Ferdowsi M, et al. Pulse train control technique for flyback converter[J]. IEEE Transactions on Power Electronics, 2004, 19(3): 757-764.
[5] Ferdowsi M, Emadi A, Telefus M, et al. Suitability of pulse train control technique for BIFRED con- verter[J]. IEEE Transactions on Aerospace and Electronic Systems, 2005, 41(1): 181-189.
[6] Telefus M, Shteynberg A, Ferdowei M, et al. Pulse train TM , a novel digital control method, applied to a discontinuous conduction mode flyback converter[C]// Power Electronics Specialist Conference, 2003: 1141- 1146.
[7] Khaligh A, Emadi A. Modified pulse adjustment technique with variable state to control DC-DC converters operating in discontinuous conduction mode and driving constant power loads[C]//IEEE International Conference on Industrial Systems Electronics and Applications, Singapore, 2006: 1-6.
[8] 刘雪山, 许建平, 秦明, 等. 电流型脉冲序列控制单电感双输出Buck变换器[J]. 电工技术学报, 2012, 27(1): 156-161.
Liu Xueshan, Xu Jianping, Qin Ming, et al. Single- inductor dual-output Buck converter with current mode pulse-train control[J]. Transactions of China Electrotechnical Society, 2012, 27(1): 156-161.
[9] 秦明, 许建平, 牟清波. 脉冲序列Buck变换器的控制规律及特性[J]. 西南交通大学学报, 2009, 44(5): 660-666.
Qin Ming, Xu Jianping, Mou Qingbo. Control laws and characters of pulse train controlled buck con- verter[J]. Journal Southwest Jiaotong University, 2009, 44(5): 660-666.
[10] 秦明, 许建平. 开关变换器多级脉冲序列控制研究[J]. 物理学报, 2009, 58(11): 7603-7612.
Qin Ming, Xu Jianping. Study of multilevel pulse train control technique for switching converters[J]. Acta Physica Sinica, 2009, 58(11): 7603-7612.
[11] 马正华, 夏建峰, 包伯成, 等. 断电导电模式Buck变换器双脉冲跨周期调制技术[J]. 中国电机工程学报, 2013, 33(12): 25-31.
Ma Zhenghua, Xia Jianfeng, Bao Bocheng, et al. Dual pulse skipping modulation technique for buck converter operating in discontinuous current mode[J]. Proceedings of the CSEE, 2013, 33(12): 25-31.
[12] 王金平, 许建平, 秦明, 等. 开关DC-DC变换器双频率脉冲序列调制技术[J]. 中国电机工程学报, 2010, 30(33): 1-8.
Wang Jinping, Xu Jianping, Qin Ming, et al. Bi-frequency pulse-train modulation technique for switching DC-DC converters[J]. Proceedings of the CSEE, 2010, 30(33): 1-8.
[13] 王金平, 许建平, 兰燕妮. 电流型双频率脉冲序列调制开关变换器[J]. 电工技术学报, 2012, 27(7): 199-203.
Wang Jinping, Xu Jianping, Lan Yanni. Study of current-mode bi-frequency pulse-train modulation for switching converters[J]. Transactions of China Elec- trotechnical Society, 2012, 27(7): 199-203.
[14] 王金平, 许建平, 周国华, 等. 脉冲序列控制CCM Buck变换器低频波动现象分析[J]. 物理学报, 2011, 60(4): 48402(1-10).
Wang Jinping, Xu Jianping, Zhou Guohua, et al. Analysis of low-frequency oscillation phenomenon in the pulse train controlled Buck converter[J]. Acta Physica Sinica, 2011, 60(4): 48402(1-10).
[15] 许建平, 牟清波, 王金平, 等. 脉冲序列控制DCM Buck变换器输出电压纹波研究[J]. 电机与控制学报, 2010, 14(5): 2-6.
Xu Jianping, Mou Qingbo, Wang Jinping, et al. Output voltage ripple of pulse train controlled DCM Buck converter[J]. Electric Machines and Control, 2010, 14(5): 2-6.
[16] Meyer E, Zhang Z L, Liu Y F. An optimal control method for buck converters using a practical capa- citor charge balance technique[J]. IEEE Transactions on Power Electronics, 2008, 23(4): 1802-1812.
[17] 张希, 沙金, 徐杨军, 等. 恒定导通时间电容电流控制Buck变换器研究[J]. 电工技术学报, 2015, 30(23): 18-23.
Zhang Xi, Sha Jin, Xu Yangjun, et al. Research on the constant on-time capacitor current control of Buck converters[J]. Transactions of China Electro- technical Society, 2015, 30(23): 18-23.