基于准梯形永磁体的多相分数槽集中整距绕组永磁电动机齿槽转矩抑制

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (2280 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The impact of the edge thickness of the quasi-trapezoidal permanent magnet on cogging torque of multiphase fractional-slot concentrated full-pitch winding permanent magnet machines is investigated.The quasi-trapezoidal permanent magnet is actually the combination of the sinusoidal magnet and the injected third and fifth harmonics.The amplitudes of the magnet harmonics are determined by the edge thickness.The complex permanence model is adopted to calculate the cogging torque for faster optimization and determination of the optimal permanent magnet edge thickness.Analytical calculations of a 20-slot 22-pole external-rotor five-phase machine show that the quasi-trapezoidal permanent magnet is efficient to reduce cogging torque and the ratio of the optimal permanent magnet edge thickness to the maximum permanent magnet thickness is 0.5.The finite element analysis and experimental measurement of the cogging torque show the effectiveness of the analytical analysis and the conclusions.

Key words： Multiphase machine quasi-trapezoidal permanent magnet cogging torque reduction complex permanence model

Received: 05 January 2015 Published: 12 November 2015

PACS:

TM315

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Kang Huilin
	Zhou Libing
	Wang Jin
	Peng Xi

Cite this article:

Kang Huilin,Zhou Libing,Wang Jin等. Cogging Torque Reduction of Multiphase Fractional-slot Concentrated Full-pitch Winding Permanent Magnet Machine Based on Quasi-trapezoidal Permanent Magnet[J]. Transactions of China Electrotechnical Society, 2015, 30(21): 154-160.

URL:

https://dgjsxb.ces-transaction.com/EN/ OR https://dgjsxb.ces-transaction.com/EN/Y2015/V30/I21/154

[1] Levi E.Multiphase electric machines for variable-speed applications[J].IEEE Transactions on Industry Electronics,2008,55(55):1893-1909.
[2] 郭思源,周理兵,齐歌.双三相永磁同步电动机电磁性能解析计算[J].电工技术学报,2014,29(5):17-28.
Guo Siyuan,Zhou Libing,Qi Ge.Analytical calculation of electromagnetic performance in dual three-phase permanent magnet brushless AC machines[J].Transactions of China Electrotechnical Society,2014,29(5):17-28.
[3] EL-Refaie A M.Fractional-slot concentrated windings synchronous permanent magnet machines:opportunities and challenges[J].IEEE Transaction on Industry Applications,2010,57(1):107-121.
[4] Leila P,Hamid A T.Five-phase permanent-magnet motor drives[J].IEEE Transactions on Industry Applications,2005,41(1):30-37.
[5] Wang Jin,Zhou Libing,Qu Ronghai.Harmonic current effect on torque density of a multiphase permanent magnet machine[C].International Conference on Electrical Machines and Systems,Beijing,2011:1-6.
[6] Chen Yiguang,Du Zhiming,Zhong Weigang,et al.Modular stator structure permanent magnet synchronous machine[C].World Automation Congress,Hawaii,HI,2008:1-5.
[7] Kang Huilin,Zhou Libing,Wang Jin.Harmonic winding Factors and MMF analysis for five-phase fractional-slot concentrated winding PMSM[C].International Conference on Electrical Machines and Systems,Busan,2013:1236-1241.
[8] 黄守道,刘婷,欧阳红林,等.基于槽口偏移的永磁电动机齿槽转矩削弱方法[J].电工技术学报,2013,28(3):99-106.
Huang Shoudao,Liu Ting,Ouyang Honglin,et al.A method for reducing cogging torque by slot-opening shift in permanent magnet motors[J].Transactions of China Electrotechnical Society,2013,28(3):99-106.
[9] 刘婷,欧阳红林,黄守道.基于重复单元削弱永磁风力发电动机齿槽转矩[J].电工技术学报,2011,26(12):43-48.
Liu Ting,Ouyang Honglin,Huang Shoudao.Reducing cogging torque in permanent magnet wind power generators based on repeat unit[J].Transactions of China Electrotechnical Society,2011,26(12):43-48.
[10]EL-Refaie A M,Shah M R,Qu Ronghai,et al.Effect of number of phases on losses in conducting sleeves of surface PM machine rotors equipped with fractional-Slot concentrated windings[J].IEEE Transactions on Industry Applications,2008,44(5):1522-1532.
[11]Scuiller F.Magnet shape optimization to reduce pulsating torque for a 5-phase PM low speed machine[J].IEEE Transactions on Magnetics,2014,50(4):1-9.
[12]Wang Kai,Zhu Z Q,Ombach G.Torque improvement of five-phase surface-mounted permanent magnet machine using 3rd order harmonic[J].IEEE Transactions on Energy Conversion,2014,29(3):735-747.
[13]Kang Huilin,Zhou Libing,Wang Jin,et al.Magnet shape optimization of five-phase surface-mounted permanent magnet machine to improve torque performance based on equivalent permanent magnet method[J].IEEJ Transactions on Electrical and Electronic Engineering,2015,10(S1):133-143.
[14]Wu L J,Zhu Z Q,Staton D,et al.Comparison of analytical models of cogging torque in surface-mounted PM machines[J].IEEE Transactions on Magnetics,2012,59(6):2414-2425.
[15]Zarko D,Ben D,Lipo T A,et al.Analytical solution for cogging torque in surface permanent-magnet motors using conformal mapping[J].IEEE Transactions on Magnetics,2008,44(1):52-65.
[16]Wu L J,Zhu Z Q.Analytical modeling of surface-mounted PM machines accounting for magnet shaping and varied magnet property Distribution[J].IEEE Transactions on Magnetics,2012,50(7):8101511.
[17]Zhu Z Q.A simple method for measuring cogging torque in permanent magnet machines[C].Power＆Energy Society General Meeting,Calgary,AB,2009:1-4.
[18]张宁,罗玲,李丹,等.永磁电动机齿槽转矩的测量[J].微电动机,2012,45(10):23-26.
Zhang Ning,Luo Ling,Li Dan,et al.Measuring cogging torque in permanent magnet electric machines[J].Micromotors,2012,45(10):23-26.