复合绝缘子弱憎水性状态描述方法Ⅱ——喷水分级法的不确定性

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (2345 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract This paper aims to discuss the feasibility of spray grading method for assessing hydrophobic degree of polluted composite insulators in artificial pollution tests. In the course of study hydrophobicity state of polluted high temperature vulcanizing(HTV)silicone rubber, trying to find the link of droplet contact angles and hydrophobicity classes(HC) of polluted surface. By using contact angle method and spray grading method, following phenomena were observed in tests. Firstly, spray grading process changes the original state of dirty layer, surface hydrophobicity alters with test times of spray grading. Secondly, in the situation of surface hydrophobicity is unobvious, existing uneven distribution of hydrophobicity along the depth of dirty layer. Thirdly, in the collision of droplets with polluted surface, velocity of droplets affects classification results of spray grading. Test results suggest that spray grading does not suitable for hydrophobicity assessing in artificial pollution tests. In the transition process of surface hydrophobicity from hydrophilic to hydrophobic, the linkage of droplet contact angle and HC of polluted surface is not very clear. Traditional methods for hydrophobicity description are not applicable for polluted surface with unobvious hydrophobicity. It is necessary to search new methods or parameters to evaluate hydrophobic degree of unobvious hydrophobic surfaces.

Key words： Spray grading unobvious hydrophobicity composite insualtors contact angle artificial pollution

Received: 06 February 2013 Published: 13 April 2015

PACS:

TM215.92

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Dai Hanqi
	Mei Hongwei
	Wang Liming
	Zhao Chenlong
	Jia Zhidong

Cite this article:

Dai Hanqi,Mei Hongwei,Wang Liming等. Description Method Ⅱ for Unobvious Hydrophobic State of Composite Insulators—Uncertainty of Hydrophobic Degree by Spray Grading Method[J]. Transactions of China Electrotechnical Society, 2015, 30(3): 240-249.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2015/V30/I3/240

[1] Moreno V M, Gorur R S. Effect of long-term corona on non-ceramic outdoor insulator housing materials[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2001, 8(1): 117-128.
[2] Rowland S M, Xiong Y, Robertson J, et al. Aging of silicone rubber composite insulators on 400kv trans- mission lines[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2007, 14(1): 130-136.
[3] Liu H P, Cash G, Birtwhistle D, et al G. Charateri- zation of a severely degraded silicone elastomer HV insulator-an aid to development of lifetime assess- ment techniques[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2005, 12(3): 478-486.
[4] 姚继莎. 自然环境中复合绝缘子憎水性变化特性及机理的研究[D]. 北京: 华北电力大学, 2006.
[5] 牛康. 温、湿度对硅橡胶材料憎水迁移特性的影响[D]. 北京: 清华大学, 2012.
[6] 赵林杰, 李成榕, 姚继莎, 等. 用冷雾法研究复合绝缘子污秽闪络特性[J]. 中国电机工程学报, 2007, 27(18): 71-75. Zhao Linjie, Li Chengrong, Yao Jisha, et al. Using a cold fog test method to study contamination flashover performance of composite insulators[J]. Proceedings of the CSEE, 2007, 27(18): 71-75.
[7] Swedish Transmission Research Institute．Guide 1. 92/1. Hydrophobicity classification guide[S]. STRI, 1992.
[8] Cheng Zixia, Liang Xidong, Wang Yongyong, et al. Investigation on composite insulators in contaminated areas[C]. 2002 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, Cancun, 2002, 10: 327-330.
[9] Wang Shaowu, Liang Xidong, Guan Zhicheng. Inve- stigation on hydrophobicity and pollution status of composite insulators in contaminated areas[C]. 2001 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, Ontario, Canada, 2001: 628-631.
[10] 彭银波, 李轩, 陈嘉, 等. 不同运行年限复合绝缘子表面护套特性的研究[J]. 高压电器, 2012, 48(10): 67-72. Peng Yinbo, Li Xuan, Chen Jia et al. Surface characteristics of sheath of composite insulators with different service years[J]. High Voltage Apparatus, 2012, 48(10): 67-72.
[11] 赵林杰. 硅橡胶复合绝缘子憎水性与污闪特性研究[D]. 北京: 华北电力大学, 2008.
[12] 祁兵, 唐良瑞, 张晶. 绝缘子憎水性图像检测方法研究[J]. 中国电机工程学报, 2008, 28(31): 120-124. Qi Bing, Tang Liangrui, Zhang Jing. Research on measurement of hydrophobicity of insulators[J]. Procee- dings of the CSEE, 2008, 28(31): 120- 124.
[13] 祁兵, 唐良瑞, 赵春晖. 绝缘子憎水性图像水珠/水迹形状提取算法[J]. 电工技术学报, 2008, 23(6): 19-24. Qi Bing, Tang Liangrui, Zhao Chunhui. Algorithm of distilling information of hydrophobic image of insulators [J]. Transactions of China Electrotechnical Society, 2008, 23(6): 19-24.
[14] 彭克学, 王泉德, 王先培. 基于表面喷水图像分析的绝缘子表面憎水性检测方法[J]. 绝缘材料, 2005, 7(1): 47-51. Peng Kexue, Wang Quande, Wang Xianpei. Spray image analysis based measurement of hydrophobic of insulator surfaces[J]. Insulating Materials, 2005, 7(1): 47-51.
[15] 黄晓明. 基于图像分析技术的复合绝缘子憎水性判断方法研究[D]. 北京: 华北电力大学, 2008.
[16] GB/T 24622—2009绝缘子表面润湿特性测量导则[S]. 北京: 中国标准出版社, 2010.
[17] DL/T 376—2010复合绝缘子用硅橡胶绝缘材料通用技术条件[S]. 北京: 中国电力出版社, 2010.
[18] DL/T 810—2012 ±500kV及以上电压等级直流棒形悬式复合绝缘子技术条件[S]. 北京: 中国电力出版社, 2012.
[19] 戴罕奇, 梅红伟, 王黎明, 等. 复合绝缘子弱憎水性状态描述方法Ⅰ——静态接触角法的适用性[J]. 电工技术学报, 2013, 28(8): 34-47. Dai Hanqi, Mei Hongwei, Wang Liming et al. Description method for unobvious hydrophobic state Ⅰ—usability of contact angle method[J]. Transactions of China Electrotechnical Society, 2013, 28(8): 34-47.
[20] 颜肖慈. 界面化学[M]. 北京: 化学工业出版社, 2005.