多绕组高频变压器隔离式多电平变换器研究

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (798 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract A high frequency multi-winding transformer isolated multilevel converter is proposed to realize the isolation, energy balancing and the bidirectional flow of energy instead of the conventional input transformer in high-voltage high-power cases. The DC buses of cascaded H-bridge rectifier and cascaded inverter are connected to the isolated units using a high-frequency multi-winding transformer. The different powers of loads can be easily balanced by the energy delivery within different windings by the flux of the transformer. This paper gives the topology of high frequency multi-winding transformer isolated multilevel converter. Then the control strategy of cascaded H-bridge rectifier and the high frequency isolated units is put forward. Experimental results show the correctness of the topology and its control strategy.

Key words： Multilevel converter high-frequency multi-winding transformer power balancing cascaded H-bridge converter

Received: 18 September 2012 Published: 05 November 2014

PACS:

TM46

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Gu Chunyang
	Li Yongdong
	Zheng Zedong
	Gao Zhigang

Cite this article:

Gu Chunyang,Li Yongdong,Zheng Zedong等. Research on a High Frequency Multi-Winding Transformer Isolated Multilevel Converter[J]. Transactions of China Electrotechnical Society, 2014, 29(8): 97-102.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2014/V29/I8/97

[1] 陈武, 阮新波, 颜红. 多变换器模块化串并联组合系统[J]. 电工技术学报, 2009, 24(6): 56-61. Chen Wu, Ruan Xinbo, Yan Hong. Modularization structure for series-parallel connected converters, Transactions of China Electrotechnical Society, 2009, 24(6): 56-61.
[2] Iman-Eini H, Schanen J L, Farhangi S, et al. A modular strategy for control and voltage balancing of cascaded H-bridge rectifiers[J]. IEEE Transactions on Power Electronics, 2008, 23(5): 2428-2442.
[3] 高跃, 李永东. 二极管钳位型五电平逆变器电容电压平衡域研究[J]. 电工技术学报, 2008, 23(1): 77-83. Gao Yue, Li Yongdong. Voltage balance boundary of five-level diode clamped inverters[J]. Transactions of China Electrotechnical Society, 2008, 23(1): 77-83.
[4] Busquets-Monge S, Alepuz S, Bordonau J, et al. Voltage balancing control of diode-clamped multilevel converters with passive front-ends[J]. IEEE Transactions on Power Electronics, 2008, 23(4): 1751-1758.
[5] Rodriguez J, Moran L, Pontt J, et al. High-voltage multilevel converter with regeneration capability[J]. IEEE Transactions on Industrial Electronics, 2002, 49(4): 839-846.
[6] Dell'Aquila A, Liserre M, Monopoli V G, et al. Design of a back-to-back multilevel induction motor drive for traction systems[C]. Power Electronics Specialist Conference 2003 (PESC 2003), 2003: 1764-1769.
[7] Blahnik V, Peroutka Z, Zak J, et al. Traction converter with medium-frequency transformer for railway applica- tions: direct current control of primary active rectifiers [C]. European Conference on Power Electronics and Applications 2009 (EPE 2009), 2009: 1-8.
[8] Tan N M L, Inoue S, Kobayashi A, et al. An energy storage system combining a 320-V, 12-F electric double layer capacitor bank with a bidirectional isolated DC-DC converter[C]. Applied Power Electronics Conference and Exposition 2008 (APEC 2008), 2008: 661-667.
[9] Inoue S, Akagi H. A bidirectional Isolated DC-DC converter as a core circuit of the next-generation medium-voltage power conversion system[J]. IEEE Transactions on Power Electronics, 2007, 22(2): 535-542.
[10] Hagiwara M, Wada K, Fujita H, et al. Dynamic behavior of a 21-level BTB-based power-flow controller under single-line-to-ground fault conditions[J]. IEEE Transactions on Industry Applications, 2007, 43(5): 1379-1387.