|
|
|
| The Electrical Repulsion Mechanism (ERM) Simulation Based on Electromagnetic Coupling Double Coils Model |
| Wu Jin, Zhuang Jinwu, Chen Bo, Jiang Zhuangxian |
| Naval University of Engineering Wuhan 430033 China |
|
|
|
|
Abstract The assumption that a multi-turn coil equivalent to the metal plate was in series was proposed firstly, and then an electromagnetic coupling double coils model was established which reduced complexity of the ERM solution. Secondly, parameters of the model were obtained thinking of the ERM as two coaxial circle coils with a rectangular section. The time domain iteration algorithm was employed to realize the ERM simulation lastly. The comparisons between test and simulation demonstrated rationality of the assumption and correctness of the simulation algorithm, and the simulation error was within 5%.
|
|
Received: 20 September 2012
Published: 12 December 2013
|
|
|
|
|
|
[1] Yu Kimori K, Kenichi K, Hiroyu Ki S, et al. Develo- pment of the high speed switch and its application[C]. Conference Record of IEEE Industry Applications Society Annual Meeting, 1998: 2321-2328.
[2] 王晨, 张晓锋, 庄劲武, 等. 新型混合式限流断路器设计及其可靠性分析[J]. 电力系统自动化, 2008, 32(12): 61-67.
Wang Chen, Zhang Xiaofeng, Zhuang Jinwu, et al. Design and reliability analysis of a novel hybrid current-limiting circuit breaker[J]. Automation of Electric Power Systems, 2008, 32(12): 61-67.
[3] 江壮贤, 庄劲武, 王晨, 等. 基于电磁斥力原理的高速触头机构仿真分析与设计[J]. 电工技术学报, 2011, 26(8): 172-177.
Jiang Zhuangxian, Zhuang Jinwu, Wang Chen, et al. Simulation analysis and design of a high speed contact mechanism based on electro-magnetic repulsion mechanism[J]. Transactions of China Electrotechnical Society, 2011, 26(8): 172-177.
[4] 史宗谦, 贾申利, 朱天胜, 等. 真空直流断路器高速操动机构的研究[J]. 高压电器, 2010, 46(3): 18-22.
Shi Zongqian, Jia Shenli, Zhu Tiansheng, et al. Investigations on high-speed actuator of vacuum DC circuit breaker[J]. High Voltage Apparatus, 2010, 46(3): 18-22.
[5] Jean Marc M, Alfred R. A DC hybrid circuit breaker with ultra-fast contact opening and integrated gate-commutated thyristors[J]. IEEE Transactions on Power Delivery, 2006, 21(2): 646-651.
[6] 毛海涛, 杨锋, 庄劲武, 等. 混合型限流高压转换开关电动斥力简化计算[J]. 高电压技术, 2007, 33(9): 159-162.
Mao Haitao, Yang Feng, Zhuang Jinwu, et al. Analysis and calculation for repulsion force of electromagnetic repulsion mechanism[J]. High Voltage Engineering, 2007, 33(9): 159-162.
[7] Sadedin D R. A study of the magnetic induction- repulsion accelerator[C]. Proceedings of the 8th IEEE International Pulsed Power Conference Digest of Technical Papers, 1991: 68-72.
[8] Roodenburg B, Evenblij B H, Huijser T. Simulation of a flat spiral inductor-disk geometry for electro- magnetic (EM) acceleration[C]. Proceedings of the 2nd European Pulsed Power Symposium, Hamburg, Germany, 2004: 202-206.
[9] 王子健, 何俊佳, 尹小根, 等. 基于电磁斥力机构的10kV快速真空开关[J]. 电工技术学报, 2009, 24(11): 68-75.
Wang Zijian, He Junjia, Yin Xiaogen, et al. 10kV high speed vacuum switch with electromagnetic repulsion mechanism[J]. Transactions of China Electrotechnical Society, 2009, 24(11): 68-75.
[10] 李博, 董恩源, 李晓玮, 等. 基于ANSYS的高速斥力机构的分析与实验[J]. 电气开关, 2006, 44(4): 40-44.
Li Bo, Dong Enyuan, Li Xiaowei, et al. Analysis and experiment of high-speed repulsion driver based on Ansys[J]. Electric Switchgear, 2006, 44(4): 40-44.
[11] 李庆民, 刘卫东, 钱家骊. 电磁推力机构的一种分析方法[J]. 电工技术学报, 2004, 19(2): 20-24.
Li Qingmin, Liu Weidong, Qian Jiali, et al. An analytical method for electromagnetic repulsion mechanism[J]. Transactions of China Electrotechnical Society, 2004, 19(2): 20-24.
[12] 娄杰, 李庆民, 孙庆森, 等. 快速电磁推力机构的动态特性仿真与优化设计[J]. 中国电机工程学报, 2005, 25(16): 23-29.
Lou Jie, Li Qingmin, Sun Qingsen, et al. Dynamic characteristics simulation and optimal design of the fast electromagnetic repulsion mechanism[J]. Proceedings of the CSEE, 2005, 25(16): 23-29.
[13] 孟君. 快速斥力机构的设计与应用研究[D]. 济南: 山东大学, 2010.
[14] Ali M. Direct current hybrid breakers: A design and its realization[D]. Eindhoven: Eindhoven University of Technology, 2000.
[15] 卡兰塔罗夫, 采伊特林. 电感计算手册[M]. 北京: 机械工业出版社, 1992. |
|
|
|
2013, Vol. 28 
