磁极调制式永磁电机的磁场分析与实验

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (1485 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to improve the sinusoidal waveform of air-gap magnetic field in surface-mounted permanent magnet machine (SMPMM), reduce harmonic component and increase power index, this paper proposed a novel permanent magnet machine which its rotor is sinusoidal magnetic pole modulated structure. Rotor iron core surface was composed of a number of small arrayal magnetic blocks that its width, thickness and interval between arrayed magnets meet a modulation relationship. Setting the structure and location of these magnetic blocks reasonably on rotor and would made poles generated air-gap magnetic field more closely to sinusoidal waveform. At the same time, the magnetic field analysis is carried out by finite element method firstly and then designed a prototype to verify the results. According to experiments, the sinusoidal distortion rate of air gap magnetic field has dropped by 23.51%. It is show that the magnetic pole modulation method and arrayal magnetic blocks structure is effective and correctly to improve SMPMM magnetic field waveform sinusoidal. So, using sinusoidal magnetic pole modulation is also an effective way to improve air gap magnetic field in SMPMM.

Key words： Magnetic pole modulation permanent magnet machine finite element analysis air-gap magnet field harmonic analysis

Received: 09 September 2010 Published: 20 March 2014

PACS:

TM301

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	An Yuejun
	Wen Hongliang
	An Hui
	Sun Dan
	Li Yong

Cite this article:

An Yuejun,Wen Hongliang,An Hui等. Magnetic Field Analysis and Experiment of Sinusoidal Magnetic Pole Modulation Permanent Magnet Machine[J]. Transactions of China Electrotechnical Society, 2012, 27(11): 111-117.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2012/V27/I11/111

[1] 杨玉波, 王秀和, 张鑫, 等. 磁极偏移削弱永磁电机齿槽转矩方法[J]. 电工技术学报, 2006, 21(10): 22-25.
Yang Yubo, Wang Xiuhe, Zhang Xin, et al. Cogging torque reduction method of shifting in permanent magnet motors[J]. transactions of china electrotechnical society, 2006, 21(10): 22-25.
[2] 杨玉波, 王秀和, 陈谢杰, 等. 基于不等槽口宽配合的永磁电动机齿槽转矩削弱方法[J]. 电工技术学报, 2005, 20(3): 40-44.
Yang Yubo, Wang Xiuhe, Chen Xiejie, et al. A method for reducing cogging torque by different slot widths in permanent magnet motors[J]. Transactions of China Electrotechnical Society, 2005, 20(3): 40-44.
[3] 韩力, 辛懋, 谢红, 等. 一种模拟实测过程的齿槽转矩数值计算方法[J]. 电机与控制学报, 2007, 11(6): 589-593.
Han Li, Xin Mao, Xie Hong, et al. Numerical method for calculating cogging torque by simulation of actual measurement[J]. Electric Machines and Control, 2007, 11(6): 589-593.
[4] 张颖, 林明耀. 定子齿表面开槽对永磁无刷直流电机齿槽转矩的影响[J]. 电气技术, 2008(1): 16-19.
Zhang Ying, Lin Mingyao. Influence of slotting on the teeth on the cogging torque of permanent magnetic brushless DC motor[J]. Electrical Engineering, 2008(1): 16-19.
[5] 杨玉波, 王秀和, 丁婷婷, 等. 极弧系数组合优化的永磁电机齿槽转矩削弱方法[J]. 中国电机工程学报, 2007, 27(2): 7-11.
Yang Yubo, Wang Xiuhe, Ding Tingting, et al. Analysis of the optimization of the pole arc combination to reduce the cogging torque in PM motors[J]. Proceedings of the CSEE, 2007, 27(2): 7-11.
[6] 王兴华, 励庆孚, 石山. 永磁电机磁阻转矩的抑制方法[J]. 西安交通大学学报, 2002, 36(6): 576-579.
Wang Xinghua, Li Qingfu, Shi Shan. Method of reducing cogging torque in permanent magnet motor[J]. Journal of Xi＇an Jiaotong University, 2002, 36(6): 576-579.
[7] 王成元, 王贵子, 夏加宽. 机床转台直接驱动力矩电机的转矩优化设计[J]. 沈阳工业大学学报, 2008, 30(1): 6-10.
Wang Chengyuan, Wang Guizi, Xia Jiakuan. Torque optimization of direct drive torque motor for machine rotary table[J]. Journal of Shenyang University of Technology, 2008, 30(1): 6-10.
[8] 梁中华, 康乐, 郑坤.“反电动势跟踪”法消除无刷直流电机转矩脉动[J]. 沈阳工业大学学报, 2008, 30(5): 504-508.
Liang Zhonghua, Kang Le, Zheng Kun. EMF tracking control strategy to eliminate torque ripple in BLDCM[J]. Journal of Shenyang University of Technology, 2008, 30(5): 504-508.
[9] 范坚坚, 吴建华. 计及齿槽极间隔断Halbach型磁钢的PMSM气隙磁场解析分析[J]. 中国电机工程学报, 2010, 30(12): 98-105.
Fan Jianjian, Wu Jianhua. Analytical solution and analysis of airgap magnetic field of PMSM with partition-between-poles Halbach magnet considering effect of slotting[J]. Proceedings of the CSEE, 2010, 30(12): 98-105.
[10] 安跃军, 孙昌志. 正弦极宽调制的永磁同步电动机: 中国, ZL200710157597. 0[P]. 2010-11-24.
[11] 程树康, 宫海龙, 柴凤, 等. 永磁轮毂电机齿槽转矩研究[J]. 中国电机工程学报, 2009, 29(10): 47-51.
Cheng Shukang, Gong Hailong, Chai Feng, et al. Study on cogging torque of permanent magnet in-wheel motor[J]. Proceedings of the CSEE, 2009, 29(10): 47-51.
[12] 李帅, 彭国平, 鱼振民, 等. Ansoft EM在电机设计中的应用[J]. 微电机, 2004, 37(4): 52-54.
Li Shuai, Peng Guoping, Yu Zhenmin, et al. The application of Ansoft EM in motor design[J]. Micromotors, 2004, 37(4): 52-54.
[13] Hwang Sangmoon, Eom Jaeboo. Cogging torque and acoustic noise reduction in permanent magnet motors by teeth pairing[J]. IEEE Transactions on Magnetics, 2000, 36 (5): 3142-3146.
[14] 韩肖清, 张健, 张友民, 等. 风电场谐波分析与计算[J]. 太原理工大学学报, 2009, 40(5): 540-544.
Han Xiaoqing, Zhang Jian, Zhang Youmin, et al. analysis of harmonics in Pinglu wind power plants in Shanxi province[J]. Journal of Taiyuan University of Technology, 2009, 40(5): 540-544.