近极槽数表贴式永磁同步电机齿顶漏磁分析与计算

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (478 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The zigzag leakage flux of surface-mounted permanent magnetic synchronous machines (PMSM) with similar pole and slot number is bigger than other kinds of electric machines. The traditional method, which chooses the zigzag leakage coefficient with experience and then is verified with finite element software, prolonged the design period of motor in general. Therefore, the method to calculate the zigzag leakage flux promptly and accurately is necessary. The method to calculate the average zigzag leakage flux per pole is proposed according to the different characteristics of the zigzag leakage flux per tooth in the semi-cell electric machine. Analytic expression of the average zigzag leakage flux of per pole and the zigzag leakage coefficient is deduced by converting the zigzag leakage flux of all teeth in semi-cell electric machine to per pole. And based on analytic expressions, the further study of the influences to the zigzag leakage coefficient when the pole number and pole-arc coefficient of the electric machine are changed is done. The results of analytic calculation of the average zigzag leakage flux per pole are accordant with the simulation ones. These results prove that the method to calculate the average zigzag leakage flux of per pole is correct and accurate.

Key words： Similar pole and slot number surface-mounted PMSM average zigzag leakage flux of per pole pole-arc coefficient semi-cell electric machine

Received: 25 January 2011 Published: 19 March 2014

PACS:

TM351

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Peng Bing
	Xia Jiakuan
	Wang Chengyuan
	Jing Rubao

Cite this article:

Peng Bing,Xia Jiakuan,Wang Chengyuan等. Analysis and Calculation of Zigzag Leakage Flux in Surface-Mounted PM Synchronous Machines with Similar Number of Poles and Slots[J]. Transactions of China Electrotechnical Society, 2012, 27(1): 114-118.

URL:

http://dgjsxb.ces-transaction.com/EN/ OR http://dgjsxb.ces-transaction.com/EN/Y2012/V27/I1/114

[1] Refaie El A M. Fractional-slot concentrated-windings synchronous permanent magnet machines: opportunities and challenges[J]. IEEE Transactions on Industrial Electronics, 2010, 57(1): 107-121.
[2] Bianchi N, Bolognani S, Frare P. Design criteria for high-efficiency SPM synchronous motors[J]. IEEE Transactions on Energy Conversion, 2006, 21(2): 396-404.
[3] 董婷, 黄伟, 王成元. 不等齿顶宽间隔绕组对直接驱动转台电机转矩特性的影响[J]. 电工技术学报, 2010, 25(8): 12-17, 30.
Dong Ting, Huang Wei, Wang Chengyuan. Influence of unequal teeth tips width and alternate winding on torque characteristics in direct drive table motor[J]. Transactions of China Electrotechnical Society, 2010, 25(8): 12-17, 30.
[4] Wang J B, Atallah K, Zhu Z Q, et al. Modular three-phase permanent-magnet brushless machines for in-wheel applications[J]. IEEE Transactions on Vehicular Technology, 2008, 57(5): 2714-2720.
[5] Lindh P M, Jussila H K, Niemela M, et al. Comparison of concentrated winding permanent magnet motors with embedded and surface-mounted rotor magnets[J]. IEEE Transactions on Magnetics, 2009, 45(5): 2085-2089.
[6] Magnussen F, Lendenmann H. Parasitic effects in PM machines with concentrated windings[J]. IEEE Transactions on Industry Applications, 2007, 43(5): 1223-1232.
[7] Refaie El A M, Jahns T M, Novotny D W. Analysis of surface permanent magnet machines with fractional- slot concentrated windings[J]. IEEE Transactions on Energy Conversion, 2006, 21(1): 34-43.
[8] Reddy P B, Jahns T M, Refaie El A M. Impact of winding layer number and slot/pole combination on AC armature losses of synchronous surface PM machines designed for wide constant power speed range operation[C]. Proceedings of IEEE Industry Applications Society Annual Meeting, Edmonton, Alta, Oct., 2008: 1-8.
[9] Cheng S P, Hwang C C. Design of high-performance spindle motors with single-layer concentrated windings and unequal tooth widths[J]. IEEE Transactions on Magnetics, 2007, 43(2): 802-804.
[10] Wang J B, Xia Z P, Long S A, et al. Radial force density and vibration characteristics of modular permanent magnet brushless AC machine[C]. IEE Proceedings of Electric Power Applications, 2006, 153(6): 793-801.
[11] 孙昕, 韩雪岩, 李岩. 极槽数相近的永磁同步电动机漏磁因数分析与计算[J]. 微电机, 2008, 48(1): 7-9.
Sun Xin, Han Xueyan, Li Yan. Analysis and calculation of leakage factor in permanent magnet synchronous motors with adjacent number of poles and slots[J]. Micromotors, 2008, 48(1): 7-9.
[12] Qu R H, Lipo T A. Analysis and modeling of air gap & zigzag leakage fluxes in a surface mounted-PM machine[J]. IEEE Transactions on Industry Applications, 2004, 40(1): 121-127.